LNP THERMOCOMP™ Compound - LX09404 - SABIC's Specialty

Identification & Functionality

Chemical Family: Polyether Ether Ketone (PEEK)
Fillers Included: Carbon Fiber
Polymer Name: Polyetheretherketone (PEEK)
Plastics & Elastomers Functions: Resin
Technologies: Plastics
Product Families: Plastics — Engineering & Specialty Polymers
High Performance Thermoplastics

Features & Benefits

Labeling Claims: No Added PFAS
Materials Features: Cost Effective,
Electrically Conductive,
High Stiffness,
High Strength,
High Temperature Resistance,
Light Weight,
No Added PFAS,
Very Good Heat Resistance

Applications & Uses

Markets: Consumer Goods,
Electrical & Electronics
Applications: Consumer Goods — Appliances & Electronics
Electrical & Electronics — Devices & Assemblies
Consumer Electronics,
Displays,
Industrial Automation
Electrical & Electronics — Parts & Components
Connectors,
Semiconductor Manufacturing,
Switches & Relays
Plastics & Elastomers End Uses: Appliances,
Cell Phones,
Commercial Appliance,
Computer Components,
Displays,
Electrical Components,
Electrical/Electronic Applications,
Semiconductor Applications,
Tablets
Plastics & Elastomers Processing Methods: Injection Molding

Properties

Mechanical Properties
Physical Properties
Thermal Properties
Impact Properties
Injection Molding
Note: ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.

¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.

	Value	Units	Test Method / Conditions
Tensile Stress (Break, Type I, 5 mm/min) ¹¹	280	MPa	ASTM D638
Tensile Strain (Break, Type I, 5 mm/min) ¹¹	1.3	%	ASTM D638
Tensile Modulus (at 5 mm/min) ¹¹	41500	MPa	ASTM D638
Flexural Stress (Break, 1.3 mm/min, 50 mm span) ¹¹	424	MPa	ASTM D790
Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹	29650	MPa	ASTM D790

	Value	Units	Test Method / Conditions
Specific Gravity ¹¹	1.47	—	ASTM D792
Moisture Absorption (at 23°C, 50% RH, 24hrs) ¹¹	0.41	%	ASTM D570

	Value	Units	Test Method / Conditions
Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹	332	°C	ASTM D648

	Value	Units	Test Method / Conditions
Izod Impact (Unnotched, at 23°C) ¹¹	828	J/m	ASTM D4812
Izod Impact (Notched, at 23°C) ¹¹	93	J/m	ASTM D256

Packaging & Availability

LNP™ THERMOCOMP™ Compound LX09404