LNP™ THERMOCOMP™ Compound SF006

Identification & Functionality

Additives Included

Mold Release Agent

Chemical Family

Polyamides

Fillers Included

Glass Fiber

Polymer Name

Polyamide 12 (PA 12)

Plastics & Elastomers Functions

Resin

Technologies

Plastics

Product Families

Plastics — Engineering & Specialty Polymers

Polyamides

Features & Benefits

Labeling Claims

No Added PFAS

Materials Features

Cost Effective,

Good Mold Release,

High Modulus,

High Stiffness,

No Added PFAS

Applications & Uses

Markets

Automotive & Transportation,

Consumer Goods,

Electrical & Electronics,

Industrial

Applications

Consumer Goods — Appliances & Electronics

Automotive & Transportation — Automotive

Powertrain & UTH

Industrial — Chemical & Industrial Manufacturing

Equipment & Parts

Electrical & Electronics — Devices & Assemblies

Consumer Electronics,

Displays

Electrical & Electronics — Parts & Components

Semiconductor Manufacturing

Plastics & Elastomers End Uses

Appliances,

Automotive Applications,

Automotive Under The Hood,

Cell Phones,

Commercial Appliance,

Computer Components,

Consumer Applications,

Displays,

Electrical Components,

Electrical/Electronic Applications,

Home Appliances,

Industrial Applications,

Semiconductor Applications,

Tablets

Plastics & Elastomers Processing Methods

Injection Molding

Properties

Mechanical Properties

	Value	Units	Test Method / Conditions
Tensile Stress (Break) ¹¹	106	MPa	ASTM D638
Tensile Stress (Break) ¹¹	108	MPa	ISO 527
Tensile Strain (Break) ¹¹	4.7	%	ASTM D638
Tensile Strain (Break) ¹¹	4.6	%	ISO 527
Tensile Modulus (at 50 mm/min) ¹¹	6550	MPa	ASTM D638
Flexural Stress ¹¹	170	MPa	ASTM D790
Flexural Stress ¹¹	169	MPa	ISO 178
Flexural Modulus ¹¹	5860	MPa	ASTM D790
Flexural Modulus ¹¹	6240	MPa	ISO 178
Tensile Modulus (at 1 mm/min) ¹¹	6580	MPa	ISO 527

Physical Properties

	Value	Units	Test Method / Conditions
Density ¹¹	1.24	g/cm³	ISO 1183
Density ¹¹	1.243	g/cm³	ASTM D792
Moisture Absorption (at 23°C, 50% RH, 24hrs) ¹¹	0.14	%	ASTM D570
Mold Shrinkage (flow, 24 hrs) ᵍ ¹¹	0.2 - 0.3	%	ASTM D955
Mold Shrinkage (flow, 24 hrs) ᵍ ¹¹	0.21 - 0.3	%	ISO 294
Mold Shrinkage (xflow, 24 hrs) ᵍ ¹¹	0.7 - 0.8	%	ASTM D955
Mold Shrinkage (xflow, 24 hrs) ᵍ ¹¹	0.74 - 0.81	%	ISO 294
Moisture Absorption (at 23°C, 50% RH) ¹¹	0.22	%	ISO 62

Thermal Properties

	Value	Units	Test Method / Conditions
Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹	163	°C	ASTM D648
Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹¹	0.0000437	1/°C	ASTM E831
Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹¹	0.0000437	1/°C	ISO 11359-2
Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹¹	0.000113	1/°C	ISO 11359-2
Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹¹	0.000112	1/°C	ASTM E831
Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80*10*4, sp=64mm) ¹¹	162	°C	ISO 75/Af

Impact Properties

	Value	Units	Test Method / Conditions
Izod Impact (Unnotched, at 23°C) ¹¹	950	J/m	ASTM D4812
Izod Impact (Notched, at 23°C) ¹¹	149	J/m	ASTM D256
Instrumented Dart Impact Energy (Peak, at 23°C) ¹¹	13	J	ASTM D3763
Multi-Axial Impact ¹¹	3	J	ISO 6603
Izod Impact (Unnotched, 80*10*4, at 23°C) ¹¹	58	kJ/m²	ISO 180/1U
Izod Impact (Notched, 80*10*4, at 23°C) ¹¹	15	kJ/m²	ISO 180/1A

Injection Molding

	Value	Units	Test Method / Conditions
Drying Temperature ⁷	80	°C	—
Drying Time ⁷	4	Hrs	—
Maximum Moisture Content ⁷	0.12 - 0.2	%	—
Melt Temperature ⁷	225 - 240	°C	—
Front - Zone 3 Temperature ⁷	225 - 240	°C	—
Middle - Zone 2 Temperature ⁷	220 - 230	°C	—
Rear - Zone 1 Temperature ⁷	215 - 225	°C	—
Mold Temperature ⁷	70 - 80	°C	—
Back Pressure ⁷	0.2 - 0.3	MPa	—
Screw Speed ⁷	30 - 60	rpm	—

Note

• ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.
• ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.
• ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.

 

Packaging & Availability

Country Availability

Canada,

China (Mainland),

Mexico,

USA

Regional Availability

• Americas
• Asia
• Europe
• North America