Knowde Enhanced TDS
Identification & Functionality
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Mechanical Properties
- Physical Properties
- Thermal Properties
- Impact Properties
- Injection Molding
Value | Units | Test Method / Conditions | |
Tensile Stress (Yield) | 117 | MPa | SABIC - Japan Method |
Tensile Stress (Yield, Type I, 5 mm/min) | 122 | MPa | ASTM D638 |
Tensile Strain (Break) | 12 | % | SABIC - Japan Method |
Tensile Strain (Break, Type I, 5 mm/min) | 5 | % | ASTM D638 |
Flexural Modulus | 5680 | MPa | ASTM D790 |
Flexural Stress | 166 | MPa | ASTM D790 |
Value | Units | Test Method / Conditions | |
Water Absorption (at 23°C, 24hrs) | 0.5 | % | ASTM D570 |
Mold Shrinkage (flow, 3.2 mm) | 0.4 - 0.8 | % | SABIC method |
Specific Gravity | 1.24 | — | ASTM D792 |
Value | Units | Test Method / Conditions | |
Heat Deflection Temperature (at 1.82 MPa, 6.4 mm, Unannealed) | 200 | °C | ASTM D648 |
Coefficient of Thermal Expansion (at -30°C to 30°C) | 0.00004 - 0.00006 | 1/°C | TMA |
Value | Units | Test Method / Conditions | |
Izod Impact (Notched, at 23°C) | 117 | J/m | ASTM D256 |
Value | Units | Test Method / Conditions | |
Back Pressure | 0.3 - 1.4 | MPa | — |
Drying Temperature | 95 - 105 | °C | — |
Drying Time | 3 - 4 | Hrs | — |
Drying Time (Cumulative) | 8 | Hrs | — |
Front - Zone 3 Temperature | 275 - 305 | °C | — |
Maximum Moisture Content | 0.07 | % | — |
Melt Temperature | 280 - 305 | °C | — |
Middle - Zone 2 Temperature | 270 - 305 | °C | — |
Mold Temperature | 75 - 120 | °C | — |
Nozzle Temperature | 280 - 305 | °C | — |
Rear - Zone 1 Temperature | 265 - 305 | °C | — |
Screw Speed | 20 - 100 | rpm | — |
Shot to Cylinder Size | 30 - 50 | % | — |
Vent Depth | 0.013 - 0.038 | mm | — |
Packaging & Availability
- Country Availability
- Regional Availability