NORYL™ Resin PX5534

Identification & Functionality

Fillers Included

Glass Fiber

Polymer Name

PPO/PS Alloy

Plastics & Elastomers Functions

Resin

Technologies

Plastics

Product Families

Plastics — Engineering & Specialty Polymers

Blends & Alloys

Features & Benefits

Materials Features

Amorphous,

Dimensional Stability,

Excellent Stiffness,

Good Stiffness,

High Hydrolytic Stability,

High Stiffness,

High Strength,

Low Moisture Absorption,

Low Shrinkage,

Low Specific Gravity,

Low Warpage

Applications & Uses

Markets

Building & Construction

Applications

Building & Construction — Building Envelope & Roofing

Glazing & Window Elements

Building & Construction — Building Materials

Interior Fixtures,

Pipes & Plumbing

Plastics & Elastomers End Uses

Building Materials,

Computer Components,

Construction Applications,

Electronic Components,

Faucet System Components,

Fittings,

Gears,

Hoses,

Pipes,

Pump Parts,

Water Management

Plastics & Elastomers Processing Methods

Injection Molding

Properties

Mechanical Properties

	Value	Units	Test Method / Conditions
Tensile Stress (Break, Type I, 5 mm/min) ¹¹	130	MPa	ASTM D638
Tensile Strain (Break, Type I, 5 mm/min) ¹¹	3	%	ASTM D638
Tensile Modulus (at 5 mm/min) ¹¹	8600	MPa	ASTM D638
Flexural Stress (Yield, 1.3 mm/min, 50 mm span) ¹¹	1.60E+02	MPa	ASTM D790
Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹	7200	MPa	ASTM D790
Tensile Stress (Break, 50 mm/min) ¹¹	110	MPa	ISO 527
Tensile Strain (Break, 50 mm/min) ¹¹	2.5	%	ISO 527
Tensile Modulus (at 1 mm/min) ¹¹	8200	MPa	ISO 527
Flexural Stress (Yield, at 2 mm/min) ¹¹	160	MPa	ISO 178
Flexural Modulus (at 2 mm/min) ¹¹	6800	MPa	ISO 178

Physical Properties

	Value	Units	Test Method / Conditions
Specific Gravity ¹¹	1.31	—	ASTM D792
Mold Shrinkage (flow, 3.2 mm) ᵍ ¹¹	0.1 - 0.4	%	SABIC method
Melt Flow Rate (at 280°C, 5.0 kgf) ¹¹	3.2	g/10 min	ASTM D1238
Water Absorption (at 23°C, saturated) ¹¹	0.1	%	ISO 62-1
Moisture Absorption (at 23°C, 50% RH) ¹¹	0.04	%	ISO 62
Melt Volume Rate (at 280°C, 5.0 kg) ¹¹	2	cm³/10 min	ISO 1133

Thermal Properties

	Value	Units	Test Method / Conditions
Vicat Softening Temperature (Rate B/50) ¹¹	147	°C	ASTM D1525
Vicat Softening Temperature (Rate B/50) ¹¹	147	°C	ISO 306
Heat Deflection Temperature (at 0.45 MPa, 3.2 mm, Unannealed) ¹¹	147	°C	ASTM D648
Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹	139	°C	ASTM D648
Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹¹	0.000021	1/°C	ASTM E831
Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹¹	0.000023	1/°C	ISO 11359-2
Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹¹	0.000075	1/°C	ASTM E831
Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹¹	0.00007	1/°C	ISO 11359-2
Vicat Softening Temperature (Rate B/120) ¹¹	149	°C	ISO 306
Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80*10*4, sp=64mm) ¹¹	139	°C	ISO 75/Af

Impact Properties

	Value	Units	Test Method / Conditions
Izod Impact (Unnotched, at 23°C) ¹¹	590	J/m	ASTM D4812
Izod Impact (Notched, at 23°C) ¹¹	100	J/m	ASTM D256
Izod Impact (Notched, at -30°C) ¹¹	120	J/m	ASTM D256
Instrumented Dart Impact Total Energy (at 23°C) ¹¹	20	J	ASTM D3763
Izod Impact (Unnotched, 80*10*4, at 23°C) ¹¹	30	kJ/m²	ISO 180/1U
Izod Impact (Notched, 80*10*4, at 23°C) ¹¹	11	kJ/m²	ISO 180/1A
Izod Impact (Notched, 80*10*4, at -30°C) ¹¹	10	kJ/m²	ISO 180/1A
Charpy Impact (at 23°C, V-notch Edgew 80*10*4 sp=62mm) ¹¹	8	kJ/m²	ISO 179/1eA

Injection Molding

	Value	Units	Test Method / Conditions
Drying Temperature ⁷	110 - 120	°C	—
Drying Time ⁷	3 - 4	Hrs	—
Drying Time (Cumulative) ⁷	8	Hrs	—
Maximum Moisture Content ⁷	0.02	%	—
Melt Temperature ⁷	300 - 325	°C	—
Nozzle Temperature ⁷	300 - 325	°C	—
Front - Zone 3 Temperature ⁷	290 - 325	°C	—
Middle - Zone 2 Temperature ⁷	275 - 320	°C	—
Rear - Zone 1 Temperature ⁷	265 - 315	°C	—
Mold Temperature ⁷	80 - 110	°C	—
Back Pressure ⁷	0.3 - 0.7	MPa	—
Screw Speed ⁷	20 - 100	rpm	—
Shot to Cylinder Size ⁷	30 - 70	%	—

Note

• ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.
• ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.
• ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.

 

Packaging & Availability

Country Availability

China (Mainland)

Regional Availability

• Asia