THERMODAN CP 0110-108 BK - SACO AEI Polymers - CPE

Identification & Functionality

Chemical Family: Polyethylenes,
Polyolefins
Polymer Name: Chlorinated Polyethylene (CPE)
Technologies: Elastomers
Product Families: Elastomers — Thermoplastic Elastomers
Thermoplastic Olefin Elastomers (TPO)

Features & Benefits

Labeling Claims: Lead-free
Materials Features: Self Extinguishing,
Slow Flame Propagation,
UV Resistant
Key Characteristics: Lead free, Thermoplastic CPE Compound

Applications & Uses

Markets: Electrical & Electronics
Applications: Electrical & Electronics — Wire & Cable
Building Wires & Power Cables,
Jacketing & Insulation,
Power Transmission & Distribution
Plastics & Elastomers End Uses: Cables,
Wires
Plastics & Elastomers Processing Methods: Extrusion

Properties

	Value	Units	Test Method / Conditions
Deformation Test (2000-gram Load at 121°C)	8	% Deformation	UL 1277
Elongation (After 4 Days: 100°C, IRM 902 Oil)	72	% Retention	ASTM D638
Elongation (After 60 Days: 75°C, IRM 902 Oil)	79	% Retention	ASTM D638
Elongation (After Thermal Aging: 7 Days at 121°C)	113	% Retention	ASTM D638
Elongation at Break	363	%	ASTM D638
Hardness: Durometer (10-Seconds)	51	Shore D	ASTM D2240
Hardness: Durometer 1-Second	97	Shore A	ASTM D2240
Tensile Strength (After 4 Days: 100°C, IRM 902 Oil)	79	% Retention	ASTM D638
Tensile Strength (After 60 Days: 75°C, IRM 902 Oil)	87	% Retention	ASTM D638
Tensile Strength (After Thermal Aging: 7 Days at 121°C)	100	% Retention	ASTM D638
Tensile Strength at Break	2391	psi	ASTM D638

	Value	Units	Test Method / Conditions
Flexural Modulus (at 1% Secant)	19900	psi	ASTM D790
Melt Flow Rate (at 190°C / 21.6 kg)	8.4	g/10 min	ASTM D1238
Low Temperature Brittleness (3 min in Methanol)	-23	°C	ASTM D746
Specific Gravity (at 23°C)	1.41	g/cm³	ASTM D792
Tear Strength (at 23°C)	342	lb/ft³	ASTM D470

	Value	Units	Test Method / Conditions
Limiting Oxygen Index	34	% Oxygen	ASTM D2863

Regulatory & Compliance

Technical Details & Test Data

Processing: THERMODAN® CP 0110-108 NT can be processed very easily on a wide range of commercially available extrusion equipment. A typical temperature profile would be:

Zone #1 Zone #2 Zone #3 Zone #4 Head Die Melt Temp

Celsius 149°-160°C 160°-174°C 174°-185°C 174°-185°C 174°-185°C 188°-199°C 182°-193°C

Fahrenheit 300°-320°F 320°-345°F 345°-365°F 345°-365°F 345°-365°F 370°-390°F 360°-380°F

It is recommended that THERMODAN® CP 0110-110 BK is pre-dried for 2 to 4 hours at 150⁰F in a heated desiccant system prior to processing. As processes vary widely, please call for specific requirements for your application.

Packaging & Availability

Packaging Type: Gaylord Boxes
Packaging: THERMODAN® CP 0110-110 BK is packaged in 2,000-lb poly-lined octagon gaylords.

Storage & Handling

Storage: SACO AEI Polymers recommends that THERMODAN® CP 0110-110 BK be stored in an ambient temperature range (40 to 80⁰F), tightly sealed in its original container and away from moisture and high humidity.

THERMODAN® CP 0110-108 BK