SANMODUR LC-10M

Identification & Functionality

Core Type

Polyurethane Foam

Composite Materials Functions

Core Material

Technologies

Composite Materials

Product Families

Composite Materials — Core Materials

Foam Cores

Features & Benefits

Materials Features

Dimensional Stability,

High Strength,

Light Weight

Features

• Light weight and excellent machinability
• Excellent dimensional stability, heat resistance and strength
• Applicable to mock-ups, negative molds etc.

Features and Major Physical Properties SANMODUR LC - M

• *1 - The board was cut using an NC machine. The Surface roughness of the cut section was measured through the use of non-contact three-dimensional surface roughness tester. The surface roughness is the average absolute value of irregularities; and the lower the value, the smoother the surface is.
• *2 - The milling resistance during cutting through the use of an NC machine driven with 4-component dynamometer under the following conditions was measured: Edge: throw-away tip of carbide tool with a diameter of 10mm (0.4in), Revolution rate; 10,000 rpm, Feed speed: 2,000 mm/min (6.56 ft/min), Cut depth: 3mm (0.12in).
• *3 - The board was cut continuously for 10m (32.8ft) using an NC machine under the following conditions; Edge: normal cutting edge of high-speed steel with a diameter of 10 mm (0.4in), Revolution rate: 10,000 rpm, Feed speed: 100mm/min (0.33 ft/min), pitch: 1mm (0.04in), Cut depth: 3mm (0.12in) The degree of abrasion of the cutter edge after cutting was visually evaluated with a stereomicroscope"

Applications & Uses

Markets

Automotive & Transportation,

Building & Construction,

Industrial

Applications

Automotive & Transportation — Automotive

Automotive Lighting,

Exterior & Body,

Interior

Building & Construction — Building Materials

Interior Fixtures,

Wall Panels

Industrial — Chemical & Industrial Manufacturing

Tooling & Moldmaking

Plastics & Elastomers End Uses

Lighting Fixtures

Properties

Physical Form

Solid

Physical Properties

	Value	Units	Test Method / Conditions
Abrasion of Cutter Edge	0.04 (0.9)	in (mm)	*3
Hardness	40	Shore D	ASTM D2240
Coefficient of Linear Thermal Expansion	85x10^-6 (47x10^-6)	°F/(°C)	TMA
Deflection Temperature Under Load	176 (80)	°F(°C)	ASTM D 648
Density	25 (400)	lb/ft3 (kg/m3)	ASTM D 792
Flexural Strength	209x10^3(10)	lbf/ft2 (MPa)	ASTM D 790
Impact Strength	165(1.9)	lbf/ft2 (kJ/m2)	ASTM D 256
Milling Resistance	7.8 (35)	lbf (N)	*2
Surface Roughness	42x10^-6 (13)	ft (μm)	*1

Packaging & Availability

Size and Packing

The following table shows the size and number of boards per case. 

Product Name	Size Approx.[in]	Size [mm]	Number of Boards per Case
SANMODUR LC-10M	59×20×4	1500×500×100	1