Products

PELECTRON PVL is a polymer-alloy type permanent antistatic agent for polyolefin resins (e. g. polyethylene, and polypropylene) which was developed by using an original Sanyo Chemical compatibilization technique. This product imparts a long-lasting antistatic property to polyolefin resins while causing practically no lowering of their physical properties and moldability. This product dry-blended with polyolefin can be directly molded without a kneading process because this product exhibits excellent dispersibility in polyolefin. In addition, compared to conventional permanent antistatic agents, PELECTRON PVL exhibits an excellent antistatic property even when used in small amounts because this product substantially decreases surface resistivity of polyolefin.

SANMODUR TW-E is tooling material (chemical board) for models & molds in various processes. It has lower rates of moisture expansion this is less than one-quarter that of a conventional product. Improving deflection temperature to 95°C maintaining other performance of conventional product.

UMEX products are a series of acid modified low-molecular-weight polyolefin containing a carboxylic anhydride group as the functional group. These products have a higher degree of modification and lower melt viscosity compared with conventional acid modified polyolefin. Therefore, the reactivity of the products is extremely adaptable to various synthetic resins and inorganic materials.

PELESTAT 300 is a polymer-alloy type permanent antistatic agent for polyolefin resins (e.g. Polyethylene, polypropylene) which was developed by using an original Sanyo Chemical compatibilization technique. This product imparts a long-lasting antistatic property to polyolefin resins while causing practically no lowering of their physical properties and moldability. This product dry-blended with polyolefin can be directly molded into the final product, using appropriate molders such as an injection molding machine, an extrusion molding machine and a calender, without a kneading process because this product exhibits excellent dispersibility in polyolefin.

PELECTRON PVH is a polymer-alloy type permanent antistatic agent for polyolefin resins (e. g. Polyethylene, and polypropylene) which was developed by using an original Sanyo Chemical compatibilization technique. This product imparts a long-lasting antistatic property to polyolefin resins while causing practically no lowering of their physical properties and moldability. This product dry-blended with polyolefin can be directly molded without a kneading process because this product exhibits excellent dispersibility in polyolefin. In addition, compared to conventional permanent antistatic agents, PELECTRON PVH exhibits an excellent antistatic property even when used in small amounts because this product substantially decreases surface resistivity of polyolefin.

SANMODUR MAX-M is tooling material (chemical board) for models & molds in various processes. It has lower rates of moisture expansion this is less than one-quarter that of a conventional product. Improving deflection temperature to 88°C maintaining other performance of conventional product.

SANMODUR MH-15E is tooling material (chemical board) for models & molds in various processes. It has light weight, smooth surface, excellent machinability and antistatic property painting processes can be simplified and applicable to design models, styling models etc.

SANMODUR MH-5E is tooling material (chemical board) for models & molds in various processes. It has light weight, smooth surface, excellent machinability and antistatic property painting processes can be simplified and applicable to design models, styling models etc.

PELESTAT 230 is a polymer-alloy type permanent antistatic agent for polyolefin resins (e.g. Polyethylene, polypropylene) which was developed by using an original Sanyo Chemical compatibilization technique. This product imparts a permanent antistatic property to polyolefin while causing practically no lowering of the physical properties of the resins themselves. It is particularly suitable for blown films and sheets of polyethylene (PE), and films and sheets of polypropylene (PP).

SANMODUR MH-20E is tooling material (chemical board) for models & molds in various processes. It has light weight, smooth surface, excellent machinability and antistatic property painting processes can be simplified and applicable to design models, styling models etc.

SANMODUR LC-5M is tooling material (chemical board) for models & molds in various processes. It is light weight and has excellent machinability. It has excellent dimensional stability, heat resistance and strength.

PELESTAT HC6800 is a polymer-alloy type permanent antistatic agent for styrene resins which was developed by using an original Sanyo Chemical compatibilization technique. This product imparts a permanent antistatic property to styrene resins such as ABS resins and styrene-MMA copolymer (MS resins) while causing practically no lowering of their physical properties and moldability.

PELECTRON AS is a polymer-alloy type permanent antistatic agent for styrene resins which were developed by using an original Sanyo Chemical compatibilization technique. This product imparts a long-lasting antistatic property to styrene resins such as ABS resin and PC/ABS resin by being kneaded into them while causing practically no lowering of their physical properties and moldability. In addition, compared to conventional permanent antistatic agents, PELECTRON AS exhibits an excellent antistatic property even when used in small amounts because this product substantially decreases surface resistivity of styrene resins.

SANMODUR LC-10M is tooling material (chemical board) for models & molds in various processes. It is light weight and has excellent machinability. It has excellent dimensional stability, heat resistance and strength.

SANMODUR LC-15M is tooling material (chemical board) for models & molds in various processes. It is light weight and has excellent machinability. It has excellent dimensional stability, heat resistance and strength.

PELESTAT NC6321 is a polymer-alloy type permanent antistatic agent for styrene resins which was developed by using an original Sanyo Chemical compatibilization technique. This product imparts a permanent antistatic property to styrene resins such as ABS resins and styrene-acrylic resins (MS resins) while causing practically no lowering of the physical properties and moldability of the resins themselves.

PELESTAT NC7530 is a permanent antistatic agent for styrene resins which was developed by using an original Sanyo Chemical compatibilization technique. This product imparts a permanent antistatic property when blended with styrene resins while causing practically no lowering of their physical properties and moldability. It minimally affects the transparency of styrene-acrylic copolymer (MS resin) with a refractive index of approx. 1.53.

UMEX products are a series of acid modified low-molecular-weight polyolefin containing a carboxylic anhydride group as the functional group. These products have a higher degree of modification and lower melt viscosity compared with conventional acid modified polyolefin. Therefore, the reactivity of the products is extremely adaptable to various synthetic resins and inorganic materials.

SANMODUR SX-5 is tooling material (chemical board) for models & molds in various processes. It has light weight, smooth surface and excellent machinability and applicable to mock-ups, styling models etc.

SANMODUR SX-10 is tooling material (chemical board) for models & molds in various processes. It has light weight, smooth surface and excellent machinability and applicable to mock-ups, styling models etc.

SANMODUR MH-10E is tooling material (chemical board) for models & molds in various processes. It has light weight, smooth surface, excellent machinability and antistatic property painting processes can be simplified and applicable to design models, styling models etc.

UMEX products are a series of acid modified low-molecular-weight polyolefin containing a carboxylic anhydride group as the functional group. These products have a higher degree of modification and lower melt viscosity compared with conventional acid modified polyolefin. Therefore, the reactivity of the products is extremely adaptable to various synthetic resins and inorganic materials.

UMEX products are a series of acid modified low-molecular-weight polyolefin containing a carboxylic anhydride group as the functional group. These products have a higher degree of modification and lower melt viscosity compared with conventional acid modified polyolefin. Therefore, the reactivity of the products is extremely adaptable to various synthetic resins and inorganic materials.

SANMODUR MH-3E is tooling material (chemical board) for models & molds in various processes. It has light weight, smooth surface, excellent machinability and antistatic property painting processes can be simplified and applicable to design models, styling models etc.

UMEX 5200 is a specially-developed acid modified low-molecular-weight polypropylene. This product has a higher degree of modification and lower melt viscosity compared with conventional acid modified polypropylene. Therefore, polyolefin blended with the products excels in dispersibility of both pigments and fillers in resins, readily adheres to other materials. Moreover, this product works exceedingly well for improving molding processability of various resins.

SANMODUR SX-20 is tooling material (chemical board) for models & molds in various processes. It has light weight, smooth surface and excellent machinability and applicable to mock-ups, styling models etc.

SANMODUR MH-8E is tooling material (chemical board) for models & molds in various processes. It has light weight, smooth surface, excellent machinability and antistatic property painting processes can be simplified and applicable to design models, styling models etc.

SANMODUR LC-20M is tooling material (chemical board) for models & molds in various processes. It is light weight and has excellent machinability. It has excellent dimensional stability, heat resistance and strength.

SANMODUR MH-E is tooling material (chemical board) for models & molds in various processes. It has light weight, smooth surface, excellent machinability and antistatic property painting processes can be simplified and applicable to design models, styling models etc.

SANMODUR MDX-M is tooling material (chemical board) for models & molds in various processes. It has fine surface and homogeneous cell structures good processability good dimensional stability and high heat resistance