Products

PELECTRON PVL is a polymer-alloy type permanent antistatic agent for polyolefin resins (e. g. polyethylene, and polypropylene) which was developed by using an original Sanyo Chemical compatibilization technique. This product imparts a long-lasting antistatic property to polyolefin resins while causing practically no lowering of their physical properties and moldability. This product dry-blended with polyolefin can be directly molded without a kneading process because this product exhibits excellent dispersibility in polyolefin. In addition, compared to conventional permanent antistatic agents, PELECTRON PVL exhibits an excellent antistatic property even when used in small amounts because this product substantially decreases surface resistivity of polyolefin.

NEWPOL 50HB-400 is polyoxyalkylene glycol-type lubricants which are useful to apply as hydraulic fluids (water and glycol-type), high-temperature lubricants, low-temperature lubricating oil, compressor oil, vacuum pump oil, gear oil, hydraulic fluids, brake fluids for cars, grease, engine detergent, water-soluble cutting fluids, drawing oil, quenching oil, heating medium, mold-releasing agents for resins and rubber, lubricants for textile industries, defoaming agents, etc.

NEWPOL 50HB-100 is polyoxyalkylene glycol-type lubricants which are useful to apply as hydraulic fluids (water and glycol-type), high-temperature lubricants, low-temperature lubricating oil, compressor oil, vacuum pump oil, gear oil, hydraulic fluids, brake fluids for cars, grease, engine detergent, water-soluble cutting fluids, drawing oil, quenching oil, heating medium, mold-releasing agents for resins and rubber, lubricants for textile industries, defoaming agents, etc.

NEWPOL LB-1715 is suitable for application to rubbers, plastics such as high speed tire molding, foam rubber, etc. They are used in organic solvent solution.

NEWPOL LB-300X is polyalkylene glycol-type lubricants used for various purposes including compressor oils, gear oils and grease. They leave no residue after combustion. They cause practically no swelling and no shrinkage of natural or synthetic rubbers. It can be used when extremely high heat resistance is required.

PELESTAT 300 is a polymer-alloy type permanent antistatic agent for polyolefin resins (e.g. Polyethylene, polypropylene) which was developed by using an original Sanyo Chemical compatibilization technique. This product imparts a long-lasting antistatic property to polyolefin resins while causing practically no lowering of their physical properties and moldability. This product dry-blended with polyolefin can be directly molded into the final product, using appropriate molders such as an injection molding machine, an extrusion molding machine and a calender, without a kneading process because this product exhibits excellent dispersibility in polyolefin.

PELECTRON PVH is a polymer-alloy type permanent antistatic agent for polyolefin resins (e. g. Polyethylene, and polypropylene) which was developed by using an original Sanyo Chemical compatibilization technique. This product imparts a long-lasting antistatic property to polyolefin resins while causing practically no lowering of their physical properties and moldability. This product dry-blended with polyolefin can be directly molded without a kneading process because this product exhibits excellent dispersibility in polyolefin. In addition, compared to conventional permanent antistatic agents, PELECTRON PVH exhibits an excellent antistatic property even when used in small amounts because this product substantially decreases surface resistivity of polyolefin.

NEWPOL LB-65 is polyalkylene glycol-type lubricants used for various purposes including compressor oils, gear oils and grease. They leave no residue after combustion. They cause practically no swelling and no shrinkage of natural or synthetic rubbers.

POLYTHICK 5423A is a one-component type pressure-sensitive adhesive for polypropylene film. This product exhibits moderate adhesive strength and removability. It is applicable as an adhesive sealant for polypropylene bags (used in the packaging of products such as calculators, clocks and clothes) and envelopes.

PELESTAT 230 is a polymer-alloy type permanent antistatic agent for polyolefin resins (e.g. Polyethylene, polypropylene) which was developed by using an original Sanyo Chemical compatibilization technique. This product imparts a permanent antistatic property to polyolefin while causing practically no lowering of the physical properties of the resins themselves. It is particularly suitable for blown films and sheets of polyethylene (PE), and films and sheets of polypropylene (PP).

NEWPOL 50HB-660 is polyoxyalkylene glycol-type lubricants which are useful to apply as hydraulic fluids (water and glycol-type), high-temperature lubricants, low-temperature lubricating oil, compressor oil, vacuum pump oil, gear oil, hydraulic fluids, brake fluids for cars, grease, engine detergent, water-soluble cutting fluids, drawing oil, quenching oil, heating medium, mold-releasing agents for resins and rubber, lubricants for textile industries, defoaming agents, etc.

PELESTAT HC6800 is a polymer-alloy type permanent antistatic agent for styrene resins which was developed by using an original Sanyo Chemical compatibilization technique. This product imparts a permanent antistatic property to styrene resins such as ABS resins and styrene-MMA copolymer (MS resins) while causing practically no lowering of their physical properties and moldability.

PELECTRON AS is a polymer-alloy type permanent antistatic agent for styrene resins which were developed by using an original Sanyo Chemical compatibilization technique. This product imparts a long-lasting antistatic property to styrene resins such as ABS resin and PC/ABS resin by being kneaded into them while causing practically no lowering of their physical properties and moldability. In addition, compared to conventional permanent antistatic agents, PELECTRON AS exhibits an excellent antistatic property even when used in small amounts because this product substantially decreases surface resistivity of styrene resins.

PELESTAT NC6321 is a polymer-alloy type permanent antistatic agent for styrene resins which was developed by using an original Sanyo Chemical compatibilization technique. This product imparts a permanent antistatic property to styrene resins such as ABS resins and styrene-acrylic resins (MS resins) while causing practically no lowering of the physical properties and moldability of the resins themselves.

PELESTAT NC7530 is a permanent antistatic agent for styrene resins which was developed by using an original Sanyo Chemical compatibilization technique. This product imparts a permanent antistatic property when blended with styrene resins while causing practically no lowering of their physical properties and moldability. It minimally affects the transparency of styrene-acrylic copolymer (MS resin) with a refractive index of approx. 1.53.

NEWPOL LB-285 is polyalkylene glycol-type lubricants used for various purposes including compressor oils, gear oils and grease. They leave no residue after combustion. They cause practically no swelling and no shrinkage of natural or synthetic rubbers.

NEWPOL LB-385 is polyalkylene glycol-type lubricants used for various purposes including compressor oils, gear oils and grease. They leave no residue after combustion. They cause practically no swelling and no shrinkage of natural or synthetic rubbers.

NEWPOL LB-3000 is polyalkylene glycol-type lubricants used for various purposes including compressor oils, gear oils and grease. They leave no residue after combustion. They cause practically no swelling and no shrinkage of natural or synthetic rubbers.

NEWPOL LB-625 is suitable for application to rubbers, plastics such as high speed tire molding, foam rubber, etc. They are used in organic solvent solution.

NEWPOL LB-1800X is polyalkylene glycol-type lubricants used for various purposes including compressor oils, gear oils and grease. They leave no residue after combustion. They cause practically no swelling and no shrinkage of natural or synthetic rubbers. It can be used when extremely high heat resistance is required.

NEWPOL LB-400XY is polyalkylene glycol-type lubricants used for various purposes including compressor oils, gear oils and grease. They leave no residue after combustion. They cause practically no swelling and no shrinkage of natural or synthetic rubbers. It can be used when extremely high heat resistance is required.

NEWPOL 50HB-260 is polyoxyalkylene glycol-type lubricants which are useful to apply as hydraulic fluids (water and glycol-type), high-temperature lubricants, low-temperature lubricating oil, compressor oil, vacuum pump oil, gear oil, hydraulic fluids, brake fluids for cars, grease, engine detergent, water-soluble cutting fluids, drawing oil, quenching oil, heating medium, mold-releasing agents for resins and rubber, lubricants for textile industries, defoaming agents, etc.

NEWPOL LB-650X is polyalkylene glycol-type lubricants used for various purposes including compressor oils, gear oils and grease. They leave no residue after combustion. They cause practically no swelling and no shrinkage of natural or synthetic rubbers. It can be used when extremely high heat resistance is required.