Products

PELECTRON LMP-FS is an excellent dispersibility into PE and heat-sealing property. Low resistivity which is achieved surface resistivity range to 10^8-9 ohm/sq. Low dosage minimally affects the mechanical properties and moldability

SANPRENE LQ-336N is used for resin of artificial leather & synthetic leather-Top layer for moisture-permeable & waterproofing fabrics (resulting film has the excellent moisture permeability).

UMEX products are a series of acid modified low-molecular-weight polyolefin containing a carboxylic anhydride group as the functional group. These products have a higher degree of modification and lower melt viscosity compared with conventional acid modified polyolefin. Therefore, the reactivity of the products is extremely adaptable to various synthetic resins and inorganic materials.

PELESTAT 300 is a polymer-alloy type permanent antistatic agent for polyolefin resins (e.g. Polyethylene, polypropylene) which was developed by using an original Sanyo Chemical compatibilization technique. This product imparts a long-lasting antistatic property to polyolefin resins while causing practically no lowering of their physical properties and moldability. This product dry-blended with polyolefin can be directly molded into the final product, using appropriate molders such as an injection molding machine, an extrusion molding machine and a calender, without a kneading process because this product exhibits excellent dispersibility in polyolefin.

PELESTAT LM230 is an excellent antistatic property independent of humidity-permanent antistatic agent for resins (preventing dust adhesion & troubles by static electricity, destruction of electronic circuit, electric shock & appliance malfunctions, etc. ) excellent dispersibility into PE and heat-sealing property low melting point.

SANPRENE LQ-3300 is used for resin of artificial leather & synthetic leather-Top layer for moisture-permeable & waterproofing fabrics (resulting film has the excellent moisture permeability).

SANPRENE LQ-258 is used for resin of artificial leather & synthetic leather-Top layer for moisture-permeable & waterproofing fabrics (resulting film has the excellent moisture permeability).

SANPRENE LQ-X31A is used for resin of artificial leather & synthetic leather-Top layer for moisture-permeable & waterproofing fabrics (resulting film has the excellent moisture permeability).

SANPRENE LQ-2300 is used for the production of microporous layers in wet processes. They are suitable for leather for shoe tops with a rather hard feel. The resulting films exhibit excellent hydrolysis resistance.

PELESTAT 230 is a polymer-alloy type permanent antistatic agent for polyolefin resins (e.g. Polyethylene, polypropylene) which was developed by using an original Sanyo Chemical compatibilization technique. This product imparts a permanent antistatic property to polyolefin while causing practically no lowering of the physical properties of the resins themselves. It is particularly suitable for blown films and sheets of polyethylene (PE), and films and sheets of polypropylene (PP).

PELESTAT HC6800 is a polymer-alloy type permanent antistatic agent for styrene resins which was developed by using an original Sanyo Chemical compatibilization technique. This product imparts a permanent antistatic property to styrene resins such as ABS resins and styrene-MMA copolymer (MS resins) while causing practically no lowering of their physical properties and moldability.

PELESTAT NC6321 is a polymer-alloy type permanent antistatic agent for styrene resins which was developed by using an original Sanyo Chemical compatibilization technique. This product imparts a permanent antistatic property to styrene resins such as ABS resins and styrene-acrylic resins (MS resins) while causing practically no lowering of the physical properties and moldability of the resins themselves.

PELECTRON AS is a polymer-alloy type permanent antistatic agent for styrene resins which were developed by using an original Sanyo Chemical compatibilization technique. This product imparts a long-lasting antistatic property to styrene resins such as ABS resin and PC/ABS resin by being kneaded into them while causing practically no lowering of their physical properties and moldability. In addition, compared to conventional permanent antistatic agents, PELECTRON AS exhibits an excellent antistatic property even when used in small amounts because this product substantially decreases surface resistivity of styrene resins.

PELESTAT NC7530 is a permanent antistatic agent for styrene resins which was developed by using an original Sanyo Chemical compatibilization technique. This product imparts a permanent antistatic property when blended with styrene resins while causing practically no lowering of their physical properties and moldability. It minimally affects the transparency of styrene-acrylic copolymer (MS resin) with a refractive index of approx. 1.53.

PELESTAT 1251 is a polymer-alloy type thermoplastic elastomer composed of hydrophilic and lipophilic segments. This product imparts a permanent antistatic property to styrene resins such as ABS resins and styrene-acrylic resins (MS resins) while causing practically no lowering of the physical properties and moldability of the resins themselves.

UMEX products are a series of acid modified low-molecular-weight polyolefin containing a carboxylic anhydride group as the functional group. These products have a higher degree of modification and lower melt viscosity compared with conventional acid modified polyolefin. Therefore, the reactivity of the products is extremely adaptable to various synthetic resins and inorganic materials.

UMEX products are a series of acid modified low-molecular-weight polyolefin containing a carboxylic anhydride group as the functional group. These products have a higher degree of modification and lower melt viscosity compared with conventional acid modified polyolefin. Therefore, the reactivity of the products is extremely adaptable to various synthetic resins and inorganic materials.

UMEX 5200 is a specially-developed acid modified low-molecular-weight polypropylene. This product has a higher degree of modification and lower melt viscosity compared with conventional acid modified polypropylene. Therefore, polyolefin blended with the products excels in dispersibility of both pigments and fillers in resins, readily adheres to other materials. Moreover, this product works exceedingly well for improving molding processability of various resins.

UMEX products are a series of acid modified low-molecular-weight polyolefin containing a carboxylic anhydride group as the functional group. These products have a higher degree of modification and lower melt viscosity compared with conventional acid modified polyolefin. Therefore, the reactivity of the products is extremely adaptable to various synthetic resins and inorganic materials.

SANPRENE LQ-X5 is used for the production of microporous layers in wet processes. It imparts softness feel and a good hot embossing property to leather. It is suitable for women’s shoes.

SANPRENE LQ-X3800 is used for resin of artificial leather & synthetic leather-Top layer for moisture-permeable & waterproofing fabrics (resulting film has the excellent moisture permeability).

SANPRENE LQ-660 is used for the production of microporous layers in wet processes. It is particularly suitable for leather for women’s shoes with a smooth, standard hard feel. It excels in properties to form uniform microporous film when used together.

SANPRENE LQ-3358 is particularly suitable for the production of microporous layers for shoe tops in wet processes. It is designed to achieve good balance between film forming properties and resistance to low-temperature flex cracking. The resulting film has excellent hydrolysis resistance.