Products

SAUEREISEN FibreCrete Abrasion Resistance 206 is a resin-based, impermeable corrosion barrier for use as stand-alone coatings or high-gloss sealants over other materials. Typical application thickness is 8 mils or more.

VEPrime 550 is a vinyl ester primer to be used in conjunction with Sauereisen vinyl ester systems. The function of No. 550 is to promote a tenacious bond of Sauereisen vinyl ester topcoats to concrete and steel substrates.

SAUEREISEN Hi-Temp Primer 560 is a single-component, moist-cured urethane primer to be used in conjunction with several Sauereisen coating and lining systems. The function of No. 560 is to promote a tenacious bond of Sauereisen epoxy, vinyl ester and urethane topcoats to concrete and steel substrates.

SAUEREISEN PenePrime 500 is a water-borne epoxy primer to be used in conjunction with the Sauereisen line of coatings, linings and flooring materials. PenePrime is specifically formulated to penetrate deep within concrete substrates. It is recommended to ensure maximum adhesion where conventional primers may not easily penetrate, or where solvent thinned primers are undesirable. This primer is an integral part of the aforementioned linings in that it seals porous substrates and promotes adhesion of the specified protective material. No. 500 helps reduce off-gassing from concrete. It offers easy application properties to reduce total down time.

SAUEREISEN SparkPrime 562 is a single-component, moist-cured urethane primer to be used in conjunction with several Sauereisen coating and lining systems. The function of No. 562 is to promote a tenacious bond of Sauereisen epoxy, vinyl ester and urethane topcoats to concrete and steel substrates.

Sauereisen ConoThane Glaze 310 provides outstanding gloss and color retention along with excellent resistance to abrasion and chemicals, including solvents. This product matches the performance of baked finishes and may be used on properly prepared and primed substrates of nearly any composition. ConoThane Glaze No. 310 white and clear are U.S.D.A. approved. The product is suitable for both interior and exterior environments.

SAUEREISEN ConoPrime 502 is a two part epoxy primer to be used in conjunction with the Sauereisen ConoFlex No. 381. Recommended for use on concrete and various substrate types. Formulated to provide a chemical bond with ConoFlex Urethane No. 381.

SAUEREISEN ConoWeld 501 is a primer to be used in conjunction with the Sauereisen line of epoxy coatings, linings and flooring materials. ConoWeld No. 501 is applied by spray, brush or roller over concrete and steel. This primer is an integral part of the Sauereisen lining system in that it seals porous substrates and promotes adhesion of the specified protective material. Easy application properties help to reduce total downtime.

SAUEREISEN Self-Leveling Epoxy - Chemical & Food 202SL is a self-leveling coating system for flooring applications. This product offers excellent application properties and is an deal chemical-resistant flooring material for areas where traffic is not extreme. Where skid resistance is required, various sized aggregates may be incorporated as a broadcast system.

SAUEREISEN Self-Leveling Epoxy 201SL is a long-wearing, chemically resistant flooring system with proven performance. It is resin-based and designed to exhibit low permeability and applied by pour-and-spread, trowel, roller or spray. It is ideally suited for process areas, aisles, containment dikes and other areas subject to forklift traffic and spillage of corrosives.

SAUEREISEN Fast-Trak NovolaK Glaze 229 is a coating system specifically designed to protect concrete, steel or masonry surfaces in the pulp & paper industry. FastTrak has the chemical resistance to withstand bleaches, liquors and other corrosive substances that attack unprotected trenches, sumps and chests in paper mills. Depending on the chemical and temperature environment, Fast-Trak is available in either vinyl ester or novolak epoxy formulations which are used with an appropriate Sauereisen Primer.

Novolak VEGlaze 472 is a coating used for the chemical-resistant construction of sumps, ducts, containment areas, trenches, walls, and other support columns or bases. VEGlaze may be used as a thin barrier of corrosion resistance or as a topcoat for other Sauereisen vinyl ester linings and polymer concretes. The VEGlaze system utilizes Sauereisen VEPrime No. 550 as a bond enhancing primer.

ConoGlaze Abrasion Resistance 207 is a resin-based, impermeable corrosion barrier for use as stand-alone coatings or high-gloss sealants over other materials. Typical application thickness is 8 mils or more.

ConoGlaze™ Chemical & Food 202 is a chemically-resistant, 100% solids, epoxy coating system. It is used as a topcoat for Sauereisen ConoCrete or FibreCrete systems or as a coating to protect concrete and steel from chemical attack.

ConoCrete Chemical & Food 115 is a chemically-resistant, 100% solids, aggregate-filled, epoxy floor system. It is ideal for resurfacing old and protecting new concrete floors from chemical and physical abuse. The physical properties of these materials far exceed those of concrete, providing a surface that not only has greater durability, but a chemical-resistant barrier to the substrate.

ConoGlaze Epoxy NovolaK 228 is a chemically-resistant, 100% solids, epoxy novolak coating system. It is used as a topcoat for Sauereisen ConoCrete or FibreCrete systems or as a coating to protect concrete and steel from chemical attack.

ConoGlaze General Purpose 201 is a chemically-resistant, 100% solids, epoxy coating system. It is used as a topcoat for Sauereisen ConoCrete or FibreCrete systems or as a coating to protect concrete and steel from chemical attack.