Knowde Enhanced TDS
Identification & Functionality
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Crestaform® Dental Modelling HP 3D printing resin Benefits
- Excellent mechanical performance
- High reactivity and printing speed
- Rigorously tested to ensure optimal performance
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Instructions to use the Crestaform® Dental Modelling HP resin
- Always shake or mix the resin thoroughly before use. This is especially true for Crestaform DM HP as pigment heterogeneity will affect print quality
- Open the container and pour the appropriate amount of resin into the tank according to the size of the printer model
- Make sure to not spill the resin onto the printer, LCD screen or anywhere outside of the resin tank
- If not used for a long time, please filter the resin and pour the resin into the storage container
- Compatibility
Crestaform® Dental Modeling HP is supplied in 500 g and 1000 g bottles. Bulk supply available.
Properties
- Color
- Physical Properties
- Mechanical Properties
- Typical Printing Parameters
Printer Type DLP Printer Wavelength (nm) 385 Layer Height (μm) <25 - 50 Printing Temperature (°C) 18 - 30 Base Layer Exposure Time (sec) 10 – 201 Normal Layer Exposure Time (sec) 2.0 - 4.01 1 Printed using a light power of 5.0 mW/cm2
* It is recommended that 3D resin exposure finder test prints are undertaken to find optimum cure settings- Note
- Mechanical Testing Specimen Print Orientation - 50°
- * 16 mins at 60°C + 405nm UV Post Cure for cured properties
Value | Units | Test Method / Conditions | |
ICI Viscosity (at 25°C) | 6.0 - 8.0 | Poise | — |
Liquid Density | 1.08 - 1.10 | g/cm³ | — |
Value | Units | Test Method / Conditions | |
Tensile Strength* | 69.0 | MPa | ISO 527-2 Type 5A |
Tensile Modulus* | 3.3 | GPa | ISO 527-2 Type 5A |
Elongation (at break)* | 5.0 | % | ISO 527-2 Type 5A |
Flexural Strength* | 113.0 | MPa | ISO 178 |
Flexural Modulus* | 2.8 | GPa | ISO 178 |
Hardness* | 85.0 | Shore D | ISO 868 |
Heat Deflection Temperature (1.8 MPa)* | 52.0 | °C | ISO 75-2, Method A |
Technical Details & Test Data
- Recommended Cleaning
- Soak the print in a clean isopropanol (IPA) (or similar solvent) bath for a minimum of 5 minutes. Alternatively, rinse the part with IPA until all the visible uncured resin has been removed. Reusing IPA in multiple cleans can reduce the cleanliness and clarity of a print
- Leave the print to dry off any residual solvent prior to post-curing
- Recommended Post-Curing
- Post-cure as soon as possible after completion of printing
- Post-cure every print for a minimum of 10 minutes under a dedicated curing UV light operating at 385-405nm wavelength. Alternatively, leave the print to cure for a minimum of 2 hours under direct sunlight
- Temperature-assisted UV curing will increase the rigidity of the print. It can also be used to initiate shrinkage to improve the quality of negative features
Packaging & Availability
- Packaging Information
Crestaform® Dental Modelling HP is supplied in 500 g and 1000 g bottles. Bulk supply available.
- Colour Options
- Pink/Peach
Storage & Handling
- Handling Information
Do
- Always wear Personal Protection Equipment (PPE), protective eyewear and chemical nitrile gloves when handling resin
- Shake the resin well every time before you use it or decant from the container
- If spilled, please clean the spill immediately with paper towel, and Isopropanol (IPA)
- Store it in its original container at room temperature, away from children, untrained personnel, direct or indirect sunlight, heat sources, sparks and open flames
- Use it in well ventilated rooms
- Use every sensible preventive precaution to avoid skin contact, spillage of resin, eye contact or swallowing. Make note of Local Poison Centres availability
Do not
- Expose resin to direct or indirect sunlight, UV light, heat sources, sparks and open flame while handling and storing the resin
- Touch the resin with bare hands. Always wear appropriate gloves. If skin contact occurs, wash it with soapy water. If you feel unwell, please consult immediately medical assistance
- Swallow the resin or printed objects
- Expose to children or pets
- Handle before completing training
- Expose persons sensitive to the resin components – please see Material Safety Datasheet
- Inhale the resin fumes. Use only in well ventilated rooms or areas
- Pour the resin or used IPA into the draining system
- Storage Conditions
Crestaform® Dental Modelling HP should be stored in the dark, in suitable, closed containers. It is recommended that the storage temperature should be between 15°C and 35°C. Ideally, containers should be opened only immediately prior to use. Keep out direct light/sunlight.