Products

Texipol 63-513 is a next generation inverse emulsion synthetic thickener based on a significant proportion of bio-derived content. It imparts pseudoplastic rheology to aqueous compositions and is supplied as a pre-neutralized dispersion, as the sodium salt of an acrylic based polymer. Texipol 63-513 shows broad pH compatibility.

Texicryl® 13-602 is a styrene acrylic copolymer emulsion designed for use in flexible fillers, caulks, sealant applications and architectural coatings. It enhances the workability and technical performance of many products. It meets all environmental demands, such as low VOC, APEO-free and formaldehyde-free with no compromise on quality and performance.

Texicryl® 13-812 is an alkali swellable emulsion designed for water-based printing ink formulations. It has excellent rub resistance and transfer properties. It is designed for use in flexographic inks for corrugated board. It is also suitable as a pigment grinding medium and let down vehicle.

Crestakyd® 10-1066 is a fast drying alkyd that has excellent brushability and flow characteristics, as well as good gloss retention and weathering resistance. This long oil air drying alkyd can be used for economical decorative and do-it-yourself paints, including primers, topcoats, and varnishes.

Texipol 63-510 is an inverse emulsion thickener that imparts a highly pseudoplastic rheology to aqueous based compositions. It is supplied as a pre-neutralized dispersion, as the sodium salt of an acrylic copolymer and shows thickening over a very wide pH range of 2 - 12.

Texicryl® 13-503 is a styrene acrylic copolymer emulsion designed for the formulation of printing inks for application to non absorbent, low surface energy substrates. It is used in the formulation of printing inks for substrates such as polyethylene, polypropylene and various foils.

Crestakyd® 30-5005 is short oil fast drying alkyd resin with high hardness. It is an essential paint and coating component, offering excellent durability, good flow and leveling properties. This short oil air drying alkyd is used in air drying primers and finishes, metal and wood application.

Texipol 63-237 is a multifunctional inverse emulsion thickener developed specifically for the pigment printing of textiles. It shows good all round performance with universal pigment and binder compatibility. It is supplied as a pre-neutralized dispersion as the ammonium salt of an acrylic copolymer.

Texipol 63-258 is an inverse emulsion thickener that imparts a highly pseudoplastic rheology to aqueous based compositions. It is supplied as a pre-neutralized dispersion, as the ammonium salt of an acrylic copolymer.This product acts as a thickener for various aqueous based adhesive and coating systems. In particular it can be used to thicken anionic bituminous systems, shoe creams and textured coatings.

Texicryl® 13-318 is a hydrophobically modified alkali swellable emulsion designed for use as a rheology modifier in waterbased formulations. It is highly effective in modifying viscosities at low shear rates to avoid both settling and sagging. This emulsion can be used in cartidge products and construction adhesives.

Texicryl® 13-308 is an alkali soluble emulsion designed as a thickener for water-based formulations. It can be used in the formulation of ceramic tile adhesives, paints, waterborne coating systems and for use in EN 12004-1and2: 2017 D1 CTAs, a wide range of building adhesives and highly filled coatings.

Texicryl® 13-601 is a pure acrylic copolymer emulsion designed for use in both interior and exterior coating applications. It is designed for use in the formulation of solvent free decorative coatings with excellent durability and low dirt pick up. Other applications include artist’s colors and hobby paints.

Texicryl® 13-217 is an APEO free self-crosslinking acrylic copolymer emulsion characterised by a soft film giving, after crosslinking, a high resistance to washing and to primed or printed fabrics. It is ideal for the manufacturing of non woven fabrics and as flocking adhesive by spraying, in full bath or by foaming.

Texicryl® 13-313 is an alkali swellable thickener designed for water-based formulations. It is highly effective in modifying viscosities at low shear rates to avoid both settling and sagging. It has been designed for use in the formulation of textured coatings, woodstains, paints and waterborne coating systems.

Texicryl® 13-809 is a styrene acrylic emulsion polymer designed for high gloss, water-based overprint varnishes and heat resistant inks. This styrene acrylic binder has been designed to provide superb clarity, water resistance, heat resistance, gloss etc. It can be used as deblocking modifier.

Texicryl® 13-687 is a high performance water based, adhesion promoted pure acrylic emulsion, which has been specifically developed for use in high performance coatings for interior and exterior applications. This polymer is in line with “green technology” as it is APEO free, max. 0.1% VOC and has a low odor emulsion.

Texicryl® 13-074 is an APEO free styrene acrylic copolymer emulsion which has been developed for use in mixes containing portland cement for flooring applications. It imparts a higher degree of flexibility and also acts as a soft binder used in fabric glue formulations for tissues and papers.

Crestacryl® 71-8026 is a thermoplastic acrylic resin with very rapid solvent release and drive-over ability. This resin possesses good quality properties such as excellent hardness, very good elasticity and adhesion. It can be used as a high grade road-marking paint with excellent solvent release.

Texicryl® 13-013 is a styrene acrylic copolymer emulsion containing a plasticizer. The product gives excellent adhesion on substrates and even at low temperature, the flexibility is good. It is suitable for paints, sealants, acrylics, highly filled putties and soft fillers applications.

Texicryl® 17-0330 is a styrene acrylic copolymer emulsion designed for use in high performance adhesives, inks, and coatings where flexibility and/or cold temperature flexibility are desired. It can be utilized in a range of water based adhesives and emulsion paint formulations and can easily be formulated into coatings varying in properties from semi-gloss finish to high pigment volume concentration low-cost paints.

Crestakyd® 10-1022 is a fast drying alkyd that has excellent brushability and flow characteristics, as well as good gloss retention and weathering resistance. This long oil air drying alkyd can be used for economical decorative and do-it-yourself paints, including primers, topcoats, and varnishes.

Texicryl® 13-023 is an aqueous dispersion of a modified styrene acrylic copolymer, used in the manufacture of high performance ceramic tile adhesives. Due to the nature of its special emulsifier system, it is possible to use Texicryl® 13-023 with various fillers (silicas, calcium carbonate, microdol etc). It functions as a high performance water resistant binder for EN 12004-1 and 2: 2017 D2 CTAs and fix grouts.

Texicryl® 13-070 is a styrene acrylic copolymer emulsion designed primarily as a binder for D1 ceramic tile adhesives. It has been designed to be formulated, with a wide range of filler types, into D1 tile adhesives. It acts as a binder for use in EN 12004-1and2: 2017 D1 CTAs, economic exterior and interior coatings, fence stains and flat paints.

Crestacryl® 71-9078 is a high quality thermoplastic acrylic resin, which gives rapid solvent release, very good elasticity, excellent adhesion on various metallic substrates and very good alkali and water resistance. It can be used as universal binder for metal paints, wood coatings, road marking paints, masonry paints and concrete.

Crestakyd® 30-5067 is a fast drying short oil alkyd supplied in xylene for use in airdry and force-dry primers and topcoats. It is recommended for use in air-dry and force-dry primers and topcoats in a variety of general industrial metal coating applications.

Texicryl® TD8449 is a styrene acrylic binder which exhibits excellent stain blocking properties and gives good results for lipstick, highlighter pen and general marker pen stains. It has shown promising results in a simple formulation for the following: Tannin stain blocking Marker stain blocking

Texicryl® 13-814 is a styrene acrylic copolymer aqueous dispersion with excellent flexibility and adhesion properties. It is suitable for use as the main binder in flexo or gravure inks and has good clarity so is suitable for offset overprint. This acrylic dispersion will also be suitable to compound into barrier coatings, as it exhibits very low MVTR and Cobb values.

Texicryl® 13-073 is a styrene acrylic copolymer emulsion, designed primarily for the production of flexible, water-resistant ceramic tile adhesives. This emulsion is especially suitable for floor tile adhesives and also used in the formulation of primer systems. It controls the porosity and aids adhesion to the base substrates.

Texicryl® 13-525 is a APEO free modified styrene acrylic copolymer designed to be the main binder in the formulation of blister seal adhesives with superb graphic qualities. The polymer will suit other heat-seal applications and is also suitable as a modifying agent in natural rubber latex in cold seal applications.

Texicryl® 13-824 is a styrene acrylic copolymer emulsion that can be coalesced to form a solvent and plasticiser resistant film. This hard non-film forming emulsion shows excellent adhesion to vinyl and non-absorbent susbstrates. It has been developed for the formulation of plasticiser resistant inks and is suitable for PVC flooring and wallpaper inks.

Crestakyd® 41-5009 is a styrene-modified alkyd based upon a blend of mixed non-yellowing oils and supplied as a solution in xylene. It is a very versatile resin that gives paints with high gloss and good resistance properties. It is also used in the marine industry for quick drying coatings.

Texicryl® 13-616 is a self crosslinking acrylic copolymer emulsion designed for use in high performance coatings. It is designed for use in high performance coatings with superior water, chemical and blocking resistance. It meets all environmental demands, such as low VOC, APEO-free and formaldehyde-free with no compromise on quality and performance.

Texicryl® 13-620 is an APEO free pure acrylic copolymer emulsion designed for use in the building and construction industry. The polymer offers improved adhesion to various substrates and superior elasticity to relevant mixtures. It is designed for use in flexible mineral sealings, crack-bridging systems, waterproof coatings, fillers, putties, polymer-modified cement and mortar based mixtures of all kinds.

Texicryl® 13-691 is an APEO free styrene acrylic copolymer emulsion designed for use in a variety of coating compounds and in a wide range of water-based paints and waterproofing compounds. Also used as a flexible water resistant binder for use in EN 12004:2001 D2 (class AA) ceramic tile adhesives and ceramic floor tile adhesives.

Texicryl® 13-819 is a styrene acrylate based vehicle designed for high gloss heat resistant overprint varnishes. It has been designed for use in hard polymers normally used in the formulating of overprint varnishes, and it can be blended into OPV’s to partially replace the hard polymer and enhance the gloss level. The product is free from APEO based surfactants.

Texicryl® 13-682 is the APEO free Styrene Acrylic copolymer emulsion designed for use in high performance roof coating compounds and in a wide range of water-based paints. It is specifically recommended for the formulation of roof mastics and waterproofing compounds. It has exceptional water resistance after drying yet good water vapour transmission. Compounds made with Texicryl® 13-682 stand up to prolonged ponded water conditions.