Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Technologies
Features & Benefits
- Labeling Claims
- Materials Features
- Features
- Selenis Maven MS 110 is recommended when a combination of decorative capability, enhanced graphics, good impact strength at low temperatures and good chemical resistance to detergents and other household cleaning agents, are essential.
- Selenis Maven MS 110 is easy to process on standard extrusion lines. Sheets made with Selenis Maven MS 110 may be personalized though different methods of decoration, due to its inherent surface tension. Selenis Maven MS 110 is BPA and styrene free and is fully recyclable code 1.
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Application
- Indoor and outdoor sign boards
- Panels for graphic arts
- Roofing
- Flat displays
Properties
- Mechanical Properties
- Typical Properties
- Thermal Properties
Value | Units | Test Method / Conditions | |
Yield Stress (σy) | 59 | MPa | ISO 527 -1/- 2 |
Elongation at Yield (ɛy) | 3.7 | % | ISO 527 -1/- 2 |
Strength (σm) | 59 | MPa | ISO 527 -1/- 2 |
Elongation at Strength (ɛm) | 3.7 | % | ISO 527 -1/- 2 |
Nominal elongation at Break (ɛtb) | 353 | % | ISO 527 -1/- 2 |
Flexural Modulus | 2214 | MPa | ISO 178 |
Flexural Strength | 75 | MPa | ISO 178 |
Notched 23ºC; 50% RH | 2.6 | kJ/m2 | ISO 180/A |
Notched 0ºC; 50% RH | 2.6 | KJ/m2 | ISO 180/A |
Notched -30ºC; 50% RH | 2.6 | KJ/m2 | ISO 180/A |
Unnotched 23ºC; 50% RH | 122 | kJ/m2 | ISO 180/U |
Unnotched 0ºC; 50% RH | 115 | KJ/m2 | ISO 180/U |
Unnotched -30ºC; 50% RH | 58 | KJ/m2 | ISO 180/U |
Puncture Impact Behavior, Energy Maximum Load 23ºC | 36 | J | ISO 6603-2/3.3 m/s |
Value | Units | Test Method / Conditions | |
Intrinsic Viscosity | 0.84 - 0.88 | dl/g | ISO 1628-5 |
Color b* | max. 0 | — | ASTM D6290 |
Color L* | min. 85 | — | ASTM D6290 |
Bulk Density | 0.84 | g/cm3 | — |
Specific Density | min. 1.39 | g/cm3 | — |
Water Absorption | max. 0.15 | % | ASTM D570 |
Particle size | 270 - 370 | mg/20 chips | — |
Pellet Shape | Cylindrical | — | — |
Melting Point | 225 - 235 | °C | ASTM D3418 |
Gloss (GU) | 155 | — | ASTM D2457/60º |
Haze, 5 mm | max. 1.5 | % | ASTM D1003 |
Acetaldehyde | max. 1 | ppm | ASTM F2013 |
Food Approval Pharmacopeia | YES | — | — |
Moisture | max. 0.2 | % | — |
Crystallinity | min. 48 | % | ASTM D1505 |
Value | Units | Test Method / Conditions | |
Vicat Softening Temperature | 78 | ºC | ISO 306/A50 |
Fire Behavior | DNI | — | ISO 3795 |
Regulatory & Compliance
- Certifications & Compliance
Technical Details & Test Data
- Technical Details
Specifications
This table contains Selenis Maven MS 110 characteristics and their methods of analysis. Some properties are subject to limits; others are presented with their typical values. Small variations of the typical values do not affect the application performance of the polymer.
All properties are measured under laboratory conditions by the analytical method shown. Limits in these specifications are applicable only to data obtained by the referenced test methods. Different methods or conditions of analysis may give rise to different values. A Certificate of Analysis, with representative average values of certain properties, can be sent to the customer when requested.
Processing
In order to obtain maximum product performance, Selenis Maven MS 110 should be dried to achieve a moisture level below 0.004 % (40 ppm) before processing. Typical drying requirements include a dehumidifying air hopper dryer with regenerative desiccant beds, -40°C dew point air, 150oC drying temperature, and a residence time between 4-6 hours, with no temperature ramp.
Typical melt temperatures are between 265 – 275oC, chosen in function of the needs of the transformation technology.
Safety & Health
- Health and Safety Consideration
Read and follow all information presented in the Safety Data Sheet (SDS) for this product.
Storage & Handling
- Storage and Handling Conditions
- Selenis Maven MS 110 is an inert material in storage and no hazards are likely to arise; however, the polymer should be stored in an area properly protected from risk of fire.
- Selenis Maven MS 110 should be stored in the original container, tightly closed in a dry, cool and well-ventilated place. Avoid direct light contact if the container is stored indoors.