Products

Selenis Maven NF 411 is an amorphous copolyester that has been specifically developed for the extrusion of heavy gage sheets, allowing for high thicknesses without crystallization occurring. Selenis Maven NF 411 is the best possible solution when exceptional clarity, surface gloss, and neutral edge color are required. Selenis Maven NF 411 is recommended when a very demanding performance and outstanding toughness are essential, such as, maximum impact strength at low temperatures and good chemical resistance to detergents and other household cleaning agents. Thanks to its inherent toughness, sheets produced from Selenis Maven NF 411 may be down-gaged without compromising performance. Cost-savings are possible given that there is no need to pre-dry the sheets. Selenis Maven NF 411 is easy to process on standard extrusion lines. Sheets made with Selenis Maven NF 411 may be easily thermoformed, cold-bent, drilled, sawed, screwed, adhesive bonded, routed and personalized though different methods of decoration. All Maven grades are BPA and styrene free.

Selenis Maven MS 105 is a copolyester with a slow crystallization rate and is suitable for the extrusion of heavy gage sheets, allowing for thicknesses up to 2 mm, without crystallization occurring. Selenis Maven MS 105 is the most economic solution for flat sheets up to this thickness range, when good clarity, surface gloss, and neutral edge color are required.

Selenis Maven NF 421 is an amorphous copolyester that has been specifically developed for the extrusion of heavy gage sheets, allowing for high thicknesses without crystallization occurring. Selenis Maven NF 421 is the best possible solution when exceptional clarity, surface gloss, and neutral edge color are required. Selenis Maven NF 421 is recommended when a very demanding performance and outstanding toughness are essential, such as, ultimate impact strength at low temperatures and good chemical resistance to detergents and other household cleaning agents. Thanks to its inherent toughness, sheets produced from Selenis Maven NF 421 may be down-gaged without compromising performance. Cost-savings are possible given that there is no need to pre-dry the sheets. Selenis Maven NF 421 is easy to process on standard extrusion lines. Sheets made with Selenis Maven NF 421 may be easily thermoformed, cold-bent, drilled, sawed, screwed, adhesive bonded, routed and personalized though different methods of decoration. All Maven grades are BPA and styrene free.

Maven NF 300 is an economical solution for the extrusion of heavy gage sheet that allows for high thicknesses without crystallization occurring. Selenis Maven NF 300 is an amorphous copolyester that has been specifically developed for the extrusion of heavy gage sheets, allowing for high thicknesses without crystallization occurring. Selenis Maven NF 300 is a very economical polymer for this highly competitive market environment. In competition with other polymers frequently used in the heavy gage sheet business such as Polycarbonate, PMMA and Polystyrene Selenis Maven NF 300 is sensibly priced while featuring excellent clarity, good surface gloss, and a practically neutral edge color. 

Selenis Maven MS 110 is a copolyester with a slow crystallization rate and is suitable for the extrusion of heavy gage sheets, allowing for thicknesses up to 4mm, without crystallization occurring. Selenis Maven MS 110 is the most economic solution for flat sheets up to this thickness range, when good clarity, surface gloss, and neutral edge color are required.

Maven MS 110 GE is the perfect choice if looking for higher transparency. Suitable for the extrusion of heavy gage sheets, this grade allows for thicknesses of up to 6mm, without crystallization.