Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
company tower banner
Shamrock Technologies Inc. Company Logo

SST® 3D

1 of 33 products in this brand
SST®-3D is a white low MW PTFE powder with a particle size mean value of 5 µm. SST®-3D has a tightly controlled particle size distribution, resulting in fewer oversized particles. SST® products are Shamrock’s PTFE micro powders that are defined by particle size and distribution, molecular weight, crystallinity, surface area, oil adsorption, powder flow, and color. Made primarily from highly controlled recycled PTFE feedstocks, SST® products are used for their ability to provide slip, non- stick, water repellency, texture, release, rub, and abrasion resistance to surfaces.

Functions: Anti-Abrasion Agent, Slip Agent

Chemical Family: Indenes

End Uses: Offset Ink, Powder Coating, Radiation Curable Coating, Solventborne Coating, Solventborne Ink, Waterborne Coating, Waterborne Ink

Technical Data Sheet
  • TypeDocument Name
View All Documents

Knowde Enhanced TDS

Identification & Functionality

Chemical Family

Indenes

CASE Ingredients Functions

Anti-Abrasion Agent,

Slip Agent

Technologies

CASE Ingredients

Product Families

CASE Ingredients — Additives

Surface Modifiers

Features & Benefits

Product Highlights
  • Rub and Abrasion Resistance
  • Slip (Low COF)
  • High Temperature Resistance
  • Scratch Resistance

Applications & Uses

Markets

Printing & Packaging

Applications

Printing & Packaging — Printing & Inks

Gravure Printing

Cure Method

Radiation Cure

Coating Type

Powder Coating,

Radiation Curable Coating,

Solventborne Coating,

Waterborne Coating

Ink & Toner Type

Offset Ink,

Solventborne Ink,

Waterborne Ink

Recommended Uses & Known Applications

SST® -3D is recommended for use in offset and liquid inks. SST® -3D is also recommended for use in powder, water-based, solvent-based and UV coatings at 0.5-3% of total formula weight when used alone, or at 0.5-1% when used with 2-3% synthetic wax.

Properties

Physical Form

Powder,

Solid

Typical Properties
ValueUnitsTest Method / Conditions
Hegman Grindmin. 6.5—ASTM D-1210
Melting Point608 / 320˚F / ˚CASTM D-4591
NPIRI Grindmax. 2—ASTM D-1316
Particle Size Mean Value5.0μm—
Particle Size Under (at 99%)12.0μmLaser Diffraction Microtrac
Specific Gravity2.15g/cm³ASTM-D 2320

Regulatory & Compliance

Regulatory Status

The components of this product are listed on multiple chemical inventories. For specific information on the applicable chemical inventories, please refer to the product SDS. This product meets the requirements of 21 CFR 175.105, 175.300, 176.170, and 176.180