Products

SPP-25 is a low molecular weight polypropylene texturing agent. The SPP Series consists of polypropylene powders in a controlled range of particle sizes. These products are stir-in powders that can be easily dispersed under high-speed mixing in solvent, UV, or water-based inks & coatings.

AquaFLON® 50-RC is an aqueous dispersion of submicron polytetrafluoroethylene (PTFE) and is produced to be in compliance with REACH regulatory requirements. The AquaFLON® product line is comprised of aqueous dispersions of PTFE or PTFE with wax. These products are designed for stability, pourability and easy incorporation into water-based systems. They are used as additives to provide slip and abrasion resistance.

Hydrocer 257 is a stable, non-ionic aqueous synthetic wax dispersion.

AquaFLON® 50 is an aqueous dispersion containing submicron PTFE. The AquaFLON® product line is comprised of aqueous dispersions of PTFE or PTFE with wax. These products are designed for stability, pourability and easy incorporation into water-based systems. These additives are used to provide slip and abrasion resistance.

Versaflow EV is a liquid homopolymer for use as an alternative to silicone.

Shamrock SST-3 Tan is a micronized, tan PTFE powder.

S-396 N1 is a finely ground, crystalline grade of polyethylene wax with a high melt point and good solvent resistance.

HydroCER EC-36 is a 35% APEO-free carnauba wax emulsion in a stable anionic surfactant system. The HydroCER products are wax emulsions, dispersions, or a combination of these.

HydroCER 584 is a 35% aqueous dispersion of high molecular weight polyethylene wax. The HydroCER products are wax emulsions, dispersions, or a combination of these.

SST®-2 is a white low MW PTFE micropowder with particle size distribution at a mean value of 8 µm. SST®-2 products are Shamrock’s PTFE micropowders that are defined by particle size and distribution, molecular weight, crystallinity, surface area, oil adsorption, powder flow, and color. Made primarily from highly controlled recycled PTFE feedstocks, SST® products are used for their ability to produce slip, nonstick, water repellency, texture, release, rub, and abrasion resistance to surfaces.

AquaFLON® 60 is a self-stable 60% Polytetrafluoroethylene (PTFE) dispersion in water. The AquaFLON® product line is comprised of aqueous dispersions of PTFE or PTFE with wax. These products are designed for stability, pourability and easy incorporation into water-based systems. They are used as additives to provide slip and abrasion resistance.

NonSKID 59 is a micronized, modified polypropylene wax. Shamrock's NonSKID micropowders provide resistance to sliding forces.

S-381-N1 is a micronized synthetic and natural wax alloy that has a uniform melting range peaking at 91°C. Shamrock’s product line of micronized waxes provide rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

HydroCER 795 is a 52% aqueous dispersion of an oxidized polyethylene wax. The HydroCER products are wax emulsions, dispersions, or a combination of these.

CeraSPERSE 171 is a synthetic wax compounded in refined linseed oil. Shamrock’s CeraSPERSE products are manufactured using a controlled crystallization process that allows the production of 1 micron wax dispersions. These wax compounds have a translucent appearance with a shiny gloss and a creamy feel. In addition to our standard products, Shamrock can develop and produce a wide range of compounds on a make-to-order basis.

CeraSPERSE 31 is carnauba wax compounded in Butyl Carbitol (Diethylene glycol monobutyl ether). This slow-evaporating, hydrophilic glycol ether provides compatibility with both polar and non-polar systems. Shamrock’s CeraSPERSE products are manufactured using a controlled crystallization process that allows the production of 1 micron wax dispersions. These wax compounds have a translucent appearance with a shiny gloss and a creamy feel. In addition to our standard products, Shamrock can develop and produce a wide range of compounds on a make-to-order basis.

HydroCER 8481 is a stable, non-ionic aqueous synthetic wax emulsion. The HydroCER products are wax emulsions, dispersions, or a combination of these.

NonSKID 5389 is a micronized, modified polypropylene wax. Shamrock’s NonSKID micropowders provide resistance to sliding forces. NonSKID 5389 is used in air dry, baked, and radiation coatings for aqueous, solvent, UV, and powder systems at 3-5% of total formula weight.

SST®-4P is an off-white to light gray low MW PTFE powder with a particle size mean value of 3 µm.

Hydrocer 7112 is a stable, aqueous synthetic wax dispersion. Keep the lid tight on the container to avoid separation. If this product has separated, simple mixing with paddle or propeller mixer is all that will be required. The Hydrocer products are wax emulsions, dispersions, or a combination of these.

PowderTEX 94 is a pure polytetrafluoroethylene (PTFE) developed as a texturing agent for powder coatings.

S-381-N5 is a modified, micronized blend of natural and synthetic wax that has a uniform melting range peaking at 91°C. Shamrock's product line of micronized waxes provide rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

S-NAUBA 5021 is a concentrated blend of carnauba and synthetic wax showing melting peaks ranging from 84 – 110°C. Shamrock’s product line of micronized waxes provides rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

FluoroSLIP® 893-A is a stir-in powder blend of spherical micronized polyethylene (PE) and polytetrafluoroethylene (PTFE).

S-256-N1 is a carnauba and synthetic wax alloy showing melting peaks ranging from 95 – 113°C. Shamrock’s product line of micronized waxes provide rub and abrasion resistance.

S-400-N1 is micronized EBS (ethylene bisstearamide) wax powder showing melting peaks ranging from 99 – 147°C. Shamrock’s product line of micronized waxes provides rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

AquaFLON® MG is an aqueous dispersion of polytetrafluoroethylene (PTFE) and carnauba wax. The AquaFLON® product line is comprised of aqueous dispersions of PTFE or PTFE with wax. These products are designed for stability, pourability and easy incorporation into water-based systems. They are used as additives to provide slip and abrasion resistance.

PowderTEX 61 is an off-white free flowing polytetrafluoroethylene (PTFE) powder that has been treated with a higher surface area inert spacer to facilitate ease of handling.

S-368-N5T is a stable water dispersible grade of synthetic wax showing melting peaks ranging from 93 – 106°C. S-368 N5T imparts lubricity, abrasion resistance and anti-blocking properties to aqueous-based systems. It also has been used successfully in laminating adhesives to improve die-cutting performance.

S-394 N5 is a polyethylene wax powder with narrow melt point temperature range and reduced solubility or use in a wide range of inks and coatings. It has a fairly high melt point, with a softening point only a few degrees lower.

AquaFLON® 178G is a stable aqueous dispersion of a blend of a synthetic wax and polytetrafluoroethylene (PTFE). The AquaFLON® product line is comprised of aqueous dispersions of PTFE or PTFE with wax. These products are designed for stability, pourability and easy incorporation into water-based systems. They are used as additives to provide slip and abrasion resistance.

SPP-10 is a low molecular weight polypropylene texturing agent. The SPP Series consists of polypropylene powders in a controlled range of particle sizes. These products are stir-in powders that can be easily dispersed under high-speed mixing in solvent, UV, or water-based inks & coatings.

HydroCER 7410 is a 45% aqueous dispersion of medium molecular weight polyethylene wax. The HydroCER products are wax emulsions, dispersions, or a combination of these.

S-379-N8 is a synthetic wax with a DSC peak melt above 100°C and corresponding low onset of melting. Shamrock’s product line of micronized waxes provide rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

S-232 MG is a micronized polyethylene-carnauba wax alloy. S-232 also is available in N1, N5 and SD3 grades.

Hydrocer D-336 is a blend of an anionic aqueous paraffin wax emulsion and synthetic wax that has been oxidized to provide water wettablility.