Products

VTC410 is an epoxy resin system designed to combine high Tg with the potential for rapid curing. It cures from 65°C to 140°C, allowing flexibility in component manufacture. It can be supplied on a variety of fabrics to meet your cost and manufacturing requirements.

MTC811 is a toughened, honeycomb bondable epoxy resin system designed to produce a durable cost effective component with an excellent surface finish. It can be supplied on a variety of fabrics and in UD format to meet your cost and manufacturing requirements.

MTC275 is an epoxy resin system designed to give excellent clarity and surface finish out of autoclave. It is a toughened epoxy resin system designed for component manufacturing that can be supplied on a variety of fabrics and in UD format to meet your cost and manufacturing requirements.

MTC475 is an epoxy resin system designed to combine excellent clarity and elevated service temperature. It cures from 80°C to 120°C, allowing flexibility in component manufacture. It can be supplied on a variety of fabrics to meet your cost and manufacturing requirements.

MTC510 is an epoxy resin system designed to cure between 80°C and 120°C allowing flexibility in component manufacture. It is a toughened epoxy resin system designed for component manufacturing that can be supplied on a variety of fabrics and in UD format to meet your cost and manufacturing requirements.

MTC400-1 is an epoxy resin system designed to cure between 85°C and 135°C allowing flexibility in component manufacture. It is a toughened epoxy resin system designed for component manufacturing that can be supplied on a variety of fabrics and in UD format to meet your cost and manufacturing requirements.

Shanghai Sunwise Chemical PS200 prepreg is a flame retardant resin system with high service temperature designed for heat and flame shielding. It can be supplied on a variety of fabrics to meet your cost and manufacturing requirements. This resin system color is dark brown / black.

LTC216 Prepreg is designed to cure at low temperatures whilst giving the potential for high temperature tooling. Typical initial cure cycles are 40 hrs at 45°C or 16 hrs at 55°C, followed by a 200°C post cure. LTC216 can be supplied on a variety of fabrics to meet your cost and manufacturing requirements.

LTC102 Prepreg is designed to cure at low temperatures whilst giving the potential for high temperature tooling. It can be supplied on a variety of fabrics to meet your cost and manufacturing requirements.

APS75 material is designed to give a high class finish with reduced pre-paint preparation and versatile curing. It can be supplied with carbon or glass fabric reinforcement. This resin system color is black. The standard system comprises of 1 layer of APS75 surface ply and 1 layer of PSB75 bulk ply.

MTC9810 is a revolutionary graphene enhanced, honeycomb bondable epoxy resin system designed to produce a durable cost effective component with an excellent surface finish along with enhanced resin toughness. It can be supplied on a variety of fabrics and in UD format to meet your cost and manufacturing requirements.

LTC150 Prepreg is designed to cure in a lower time at low temperatures than standard tooling prepregs whilst giving the potential for high temperature tooling. It can be supplied on a variety of fabrics to meet your cost and manufacturing requirements.

Shanghai Sunwise Chemical OPS75 material is designed to give a high class finish with reduced pre-paint preparation and versatile out of autoclave curing. It can be supplied with carbon or glass fabric reinforcement. This resin system color is black. The standard system comprises of 1 layer of OPS75 surface ply and 1 layer of PSB75 bulk ply.

LTC250-2XL Prepreg is designed to cure at low temperatures whilst giving you increased outlife over other low-cure systems and great flexibility in component manufacture. It is a toughened epoxy resin system that can be supplied on a variety of fabrics to meet your cost and manufacturing requirements.

MTC450 prepreg is toughened for demanding applications and is designed for high service temperatures, giving great flexibility in component manufacture. It can be supplied on a variety of fabrics and in UD format to meet your cost and manufacturing requirements.