Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Chemical Name
- Industrial Additives Functions
- CAS No.
- 4719-04-4
- EC No.
- 225-208-0
- Technologies
- Product Families
- Chemical Structure
Applications & Uses
- Markets
- Applications
- Applicable Processes
- Applications
- STEPANQUAT 200 is miscible with soft and hard water (400 ppm CaCO₃) in all proportions, as well as with alcohol and acetone, in all proportions. STEPANQUAT 200 is insoluble in ether, benzene, petroleum and/or chloroform. STEPANQUAT 200, at the recommended use level, does not contribute to corrosion of metal compounds.
- STEPANQUAT 200 is compatible with other anionics, cationics, and nonionics at the proper pH range of 8-12. Product will lose activity at a pH less than 5.0 as well as in the presence of hydrogen peroxide at a pH of greater than 10.
Properties
- Physical Form
- Appearance
- Clear amber liquid (at 25°C)
- Insoluble in
- Chloroform, Ether, Benzene, Petroleum
- Typical Properties
Value Units Test Method / Conditions Actives Content (MW 219) 78.5 % - Boiling Point 100 °C - Density 1.15 g/ml - Flash Point min. 94 °C PMCC Flash Point Tester pH 10.5 - - Regulated Volatile Organic Chemicals 0 % U.S. EPA
Regulatory & Compliance
- Chemical Inventories
- Clearances
- All components of STEPANQUAT 200 are listed in the following countries: United States (TSCA 4719-04-4), Japan (ENCS (5)-998, (5)-1080, ISHL (5)-998, (5)-1080) Canada (DSL 4719-04-4), Australia (AICS 4719-04-4), Philippines (PICCS 4719-04-4), Korea (ECL Serial No. KE-33998), China (IECS 4719-04-4) and New Zealand (NZIoC 4719-01-4).
- It is the responsibility of the formulator to review the chemical control regulations for each country where the end product is intended to be sold or used.
Safety & Health
- Health Effects
STEPANQUAT 200 is slightly toxic orally (LD₅₀ >763 g/kg) and dermally (LD₅₀ >2 g/kg) causes slight skin irritation and is corrosive to the eye. The product is not mutagenic.
Packaging & Availability
- Packaging Type
- Standard Packaging
STEPANQUAT 200 is available in 55 gallon drums (227 kg), 275 gallon totes (1134 kg) and in bulk quantities.
Storage & Handling
- Storage & Handling
- Gloves, protective clothing, safety goggles and face shield should be worn when handling STEPANQUAT 200. Avoid contact with the eyes, nose, or prolonged skin contact. Wash thoroughly after handling product.
- It is recommended that STEPANQUAT 200 be stored in sealed containers no lower in temperature than 10 °C (50 °F) or higher than 48.9 °C (120 °F) and kept in a cool, dry place. Avoid overheating or freezing.
- Bulk Storage Information: Vessels, pumps, pipes, transfer lines, and internal hairpin coil should be made of 316 stainless steel. Prolonged contact with brass, copper or aluminum piping, containers or equipment should be avoided.