Knowde Enhanced TDS
Identification & Functionality
- Chemical Name
- Agrochemical Functions
- CAS No.
- 68130-47-2
- EC No.
- 614-291-2
- Technologies
Features & Benefits
- Biodegradability
STEPFAC 3675 is biodegradable.
Applications & Uses
- Markets
- Applications
STEPFAC 3675 can be used as a biological activator and wetting agent in glyphosate formulations.
Properties
- Formulation Type
- Physical Form
- Appearance
- Clear liquid (at 25°C)
- Soluble in
- Water, Kerosene, Methanol
- Insoluble in
- Xylene
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Color | max. 4 | — | Gardener Scale |
| Density (at 25°C) | 1.14 | g/ml | — |
| Diester | max. 4 | % | — |
| Flash Point | min. 94 | °C | PMCC Flash Point Tester |
| H₃PO₄ | max. 15 | % | — |
| Moisture Content | 28 - 32 | % | — |
| pH (in 5% aqueous) | 1-2 | — | — |
| Pour Point | -21 | °C | ASTM D 97 |
| Regulated Volatile Organic Chemicals | 0 | % | U.S. EPA |
| Solids Content | 70 | % | — |
| Viscosity (at 25°C) | 190 | cPs | — |
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
- Clearances
- STEPFAC 3675 is listed in the following countries: United States (TSCA), Australia (AICS), China (IECSC), Canada (NDSL), New Zealand (NZIoC), and Europe (REACH Polymer).
- It is the responsibility of the formulator to review the chemical control regulations for each country where the end product is intended to be sold or used.
- STEPFAC 3675 is approved as an agricultural inert for Non-Food use only.
Safety & Health
- Health Effects
STEPFAC 3675 is slightly toxic orally (LD₅₀ >1000 mg/kg b.w.) and is severely irritating to skin and eyes.
- Other Data DOT Classification
- Corrosive
Packaging & Availability
- Packaging Type
- Standard Packaging
STEPFAC 3675 is available in drums (450 lb, 204 kg and 440 lb, 200 kg), totes (2200 lbs, 1000 kg) and in bulk quantities.
Storage & Handling
- Storage & Handling
- Normal safety precautions, (i.e., gloves and safety goggles) should be employed when handling STEPFAC 3675. Contact with the eyes and prolonged contact with the skin should be avoided. Wash thoroughly after handling material.
- Bulk Storage Information: Elevated storage temperature may be desirable to maintain ease of pumping, but product should be stored at ambient temperature. STEPFAC 3675 which have been stored in drums at temperatures below 30°F (-1°C) may thicken or solidify. They may be fluidized by warming with a drum heater or in a steam room. Drums should be vented prior to heating to avoid excessive pressure build up. Product temperatures over 130°F (54°C) are not recommended.
- Workplace Exposure
Occupational exposure can occur primarily through skin contact or via inhalation of vapors and mists. Exposure Engineering controls, personal protective equipment, and other workplace practices should be used to control these exposures.