Knowde Enhanced TDS
Identification & Functionality
- CASE Ingredients Functions
- Technologies
- Product Families
Applications & Uses
- Markets
- Coating Type
- Applications
Paint Additives
Properties
- Physical Form
- Appearance
- Clear yellow liquid
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Density (at 25°C) | 1.11 | g/ml | — |
| Flash Point | min. 94 | °C | — |
| pH (10% in 50:50 IPA/Water) | 7 | — | — |
| Specific Gravity (at 25°C) | 1.11 | — | — |
| Viscosity (at 25°C) | 750 | cPs | — |
| Solid Content | 81 | % | — |
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Product Safety
Environmental Effects: STEPSPERSE® 250 is expected to be biodegradable.
Health Safety: STEPSPERSE® 250 is expected to be practically nontoxic orally (LD50 > 5000 mg/kg) and slightly irritating to the skin and eyes at 100% active.
Workplace Exposure: Occupational exposure can occur primarily through skin contact or via inhalation of vapors and mists. Engineering controls, personal protective equipment, and other workplace safety practices should be used to control these exposures.
Packaging & Availability
Storage & Handling
- Packaging Information
Normal safety precautions (e.g., gloves and safety goggles) should be employed when handling STEPSPERSE® 250. Contact with eyes, nose or prolonged contact with skin should be avoided. Wash thoroughly after handling STEPSPERSE® 250.
Non-Bulk Storage Recommendations: STEPSPERSE® 250 should be stored in closed containers and kept in a cool, dry place away from incompatible materials (see Section 10 of the SDS) When stored in drums at low temperatures, STEPSPERSE® 250 may thicken or solidify. Product may be fluidized by warming with a drum heater or in a steam room and remixed. Drums should be vented prior to heating to avoid excessive pressure build-up. Product temperatures over 130°F (54°C) are not recommended. If material is frozen, it should be heated gently (do not exceed product temperatures over 130°F (54°C)) and stirred to ensure it is homogeneous prior to use.
Bulk Storage Recommendations: STEPSPERSE® 250 should be stored in vessels of 316 stainless steel or glass fiber-reinforced polyester tanks. Many oven-cured phenolic and epoxy/phenolic linings may be used. Elevated storage temperature may be desirable to maintain ease of pumping. Temperatures up to 130°F (54°C) can be maintained without degradation of the product.