company tower banner
Stepan Company Company Logo

STEPWET® DF-95

1 of 11 products in this brand
STEPWET® DF-95 is a high-activity anionic surfactant utilized across a variety of agricultural delivery systems. It belongs to the chemical group of alkyl sulfates and functions primarily as an adjuvant and wetting agent. Its wide-ranging application encompasses capsule suspensions (cs), dry products, oil dispersants (od), ready-to-use (rtu) formulations, soluble liquids (sl), suspension concentrates (sc), suspension emulsions (se), tank mix adjuvants, water dispersible granules (wg), and wettable powders (wp).

Functions: Surfactant, Surfactant (Anionic), Wetting Agent

Labeling Claims: Naturally Derived

Knowde Enhanced TDS

Identification & Functionality

CAS No.
68585-47-7
EC No.
271-557-7
Technologies

Features & Benefits

Labeling Claims
Agrochemicals Features
Biodegradability

Products are readily biodegradable.

Product Features
  • High-active (93%), naturally derived wetting agent; low-foaming.
  • Spray-dried blends of liquid anionic/nonionic surfactants and modified lignosulfonates
  • Good performance in formulations requiring high silica levels
  • Improved hard water performance
  • Improved long term storage performance
  • Compatability with PVA packaging
  • Flexibility in formulating
  • Low surface tension
  • Acts as a binder, therefore no need for external binder in most of the cases

Applications & Uses

Applications

STEPWET DF-95 is a high active anionic wetting agent. The product is available as a spray dried powder. STEPWET DF-95 is free flowing and provide rapid, efficient granule wetting and breakup when added to a pesticide. STEPWET DF-95 wetting agents can be used in water dispersible granules and wettable powders.

Properties

Physical Form
Appearance
Free flowing white powder (at 25°C)
Soluble in
Water
Insoluble in
Kerosene, Xylene, Methanol
Typical Properties
ValueUnitsTest Method / Conditions
Actives Contentmin. 93%
Density0.48g/ml
Flash Pointmin. 94°CPMCC Flash Point Tester
Moisture Contentmax. 2%
pH (in 1% aqueous)9.5
Regulated Volatile Organic Chemicals0%U.S. EPA

Regulatory & Compliance

Certifications & Compliance
Clearances
  • STEPWET DF-95 wetting agents are approved for use as inert ingredients under U.S. EPA 40 CFR 180.910 and 180.930.
  • STEPWET DF-95 wetting agents are listed in Europe (EINECS 205-788-1), Japan (ENCS 2-1679), Canada (DSL 151-21-3), China (IECSC 61791-12-6), New Zealand (NZIoC 61827-42-7), Phillippines (PICCS 25155-30- 0) Australia (AICS 151-21-3) and Korea (ECL Serial No. KE-12954).
  • It is the responsibility of the formulator to review the chemical control regulations for each country where the end product is intended to be sold or used.

Safety & Health

Toxicity

STEPWET DF-95 wetting agents are slightly toxic orally (LD₅₀ is between 0.8-1.1 g/kg) and cause moderate skin and eye irritation at 10% active.

Packaging & Availability

Packaging Type
Standard Packaging

STEPWET DF-95 is available in drums (200 lb, 91 kg) and in bulk quantities.

Storage & Handling

Storage & Handling
  • Normal safety precautions (i.e. gloves and safety goggles) should be employed when handling STEPWET DF-95 wetting agents. Contact with the eyes and prolonged contact with the skin should be avoided. To avoid inhalation of particles, wear a dust mask when handling. Wash thoroughly after handling materials.
  • Storage Information: It is recommended that STEPWET DF-95 wetting agents be stored in sealed containers and kept in a dry place.