Knowde Enhanced TDS
Identification & Functionality
- Agrochemical Functions
- Technologies
Features & Benefits
- Functions
- Emulsifier, Adjuvant, Blend
Applications & Uses
- Markets
- Applications
TOXIMUL 3483 is specially formulated blends of anionic/nonionic surfactants designed for use in an extensive range of pesticides. These blends are not designed to be used in combination. Rather, adjusting aids are available for optimization purposes. Recommended adjusting aids include, but are not limited to, NINATE® 60E, MAKON® TD-12, and TOXIMUL 8320.
- Concentrated Emulsions (EW)
- Emulsifiable Concentrates (EC)
- Fumigants
- Microemulsions (ME)
- Oil Dispersants (OD)
- Oil in Water Emulsions (EW)
- Ready-To-Use (RTU)
- Suspension Concentrates (SC)
- Suspoemulsions (SE)
- Tank Mix Adjuvants
- Wettable Powders (WP)
Properties
- Formulation Type
- Physical Form
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Actives Content | 84 | % | — |
| Boiling Point | 38 | °C | — |
| Density (at 25°C) | 1.02 | g/ml | — |
| Flash Point | 87 | °C | — |
| HLB | 10 | — | — |
| pH (5% in 1:1 IPA/H₂O) | 6 | — | — |
| Pour Point | -12 | °C | — |
| Regulated Volatile Organic Chemicals | 15 | % | U.S. EPA |
| Specific Gravity (at 25°C) | 1.02 | — | — |
| Viscosity (at 25°C) | 3000 | cPs | — |
Regulatory & Compliance
- Chemical Inventories
- Clearances
- The TOXIMUL 3483 and 3484 series are approved for use as inert ingredients used pre- and post-harvest under U.S. EPA 40 CFR 180.910 and 180.960. The limitation for post-harvest use is 15.6% for TOXIMUL 3483, and 10.4% for TOXIMUL 3484. There is no limitation for pre-harvest use.
- Components of the TOXIMUL 3483 and 3484 series are listed in the following countries’ inventories: United States (TSCA), Canada (DSL), Australia (AICS), Europe (EINECS/Polymer), New Zealand (NZIoC), Philippines (PICCS), Korea (ECL), China (IECSC).
Packaging & Availability
- Packaging Type
- Standard Packaging
TOXIMUL 3483 is available in drums (450 lb, 205 kg) and in bulk quantities.
Storage & Handling
- Storage & Handling
- Normal safety precautions (i.e. gloves and safety goggles) should be employed when handling TOXIMUL 3483 surfactant. Contact with the eyes and prolonged contact with the skin should be avoided. Wash thoroughly after handling materials. Use in a well ventilated area away from sparks and open flames.
- Bulk Storage Information: TOXIMUL 3483 stored in drums at temperatures below 30°F (-1°C) may thicken or solidify. They may be fluidized by warming with a drum heater or in a steam room. Drums should be vented prior to heating to avoid excessive pressure build up. Product temperatures over 100°F (38°C) are not recommended as excessive solvent loss may occur. The flash point may be exceeded when warming to pump but the temperature should be below the flash point for storage.