Knowde Enhanced TDS
Identification & Functionality
- Agrochemical Functions
- CAS No.
- 9003-11-6
- EC No.
- 618-355-0
- Technologies
Features & Benefits
- Agrochemicals Features
- Product Features
- Can be used as an emulsifier, dispersant or wetting agent
- Used as nonionic surfactant in emulsifier blend formulations
- Soluble in water, methanol and xylene
- Good dispersant/blooming
Applications & Uses
- Markets
- Applications
- TOXIMUL 8323 is 100% active surfactant containing approximately 50% hydrophile. It is used as a nonionic surfactant in emulsifier blend formulations.
- Emulsifiable Concentrates
- Microemulsions
- Suspension Concentrates
- Suspoemulsions
Properties
- Formulation Type
- Physical Form
- Appearance
- White paste
- Soluble in
- Water, Methanol, Xylene
- Insoluble in
- Kerosene
- Typical Properties
Value | Units | Test Method / Conditions | |
Cloud Point (in 1% aqueous solution) | 80 - 84 | °C | — |
Base | PPG/PEG | — | — |
Density (at 25°C) | 1.06 | g/ml | — |
Average Molecular Weight | 3800 | — | — |
Flash Point | min. 94 | °C | PMCC Flash Point Tester |
Surface Tension (0.1% Aqueous) | 36.5 | dynes/cm | — |
HLB | 17 | — | — |
Moisture Content | max. 0.2 | % | — |
pH (1% in 1:1 IPA/H₂O) | 6 - 8 | — | — |
Pour Point | 27 | °C | — |
Regulated Volatile Organic Chemicals | 0 | % | U.S. EPA |
Viscosity (at 65°C) | 180 | cPs | — |
Regulatory & Compliance
- Chemical Inventories
- Clearances
- TOXIMUL 8323 is approved for use as an inert ingredient under U.S. EPA 40 CFR 180.960.
- The components of TOXIMUL 8323 are listed in the following countries; United States (TSCA), Canada (DSL), Europe (EINECS and Polymer Exempt), Philippines (PICCS), New Zealand (NZIoC), Australia (AICS), China (IECSC), Japan (ENCS), and Korea (ECL).
Packaging & Availability
- Standard Packaging
TOXIMUL 8323 is available in drums (450 lb, 205 kg) and in bulk quantities.
Storage & Handling
- Storage & Handling
- Normal safety precautions (i.e. gloves and safety goggles) should be employed when handling TOXIMUL 8323. Contact with the eyes and prolonged contact with the skin should be avoided. Wash thoroughly after handling materials.
- Bulk Storage Information: Stainless steel and glass fiber-reinforced polyester tanks are recommended. Many oven-cured phenolic and epoxy/phenolic linings may also be used. Storage temperature above 85°F (29°C) are desirable to maintain ease of pumping. Temperatures up to 130°F (54°C) can be maintained for long periods of time without degradation of the product.
- TOXIMUL 8323 which has been stored in drums at temperature below 85°F (29°C) may thicken or solidify. It may be fluidized by warming with a drum heater or in a steam room. Drums should be vented prior to heating to avoid excessive pressure build up. Product temperatures over 130°F (54°C) are not recommended.