Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Agrochemical Functions
- Technologies
Features & Benefits
- Labeling Claims
- Agrochemicals Features
Applications & Uses
- Markets
- Product Applications
TOXIMUL TA-20 surfactant is an ethoxylated tallow amine with approximately twenty moles of ethylene oxide. It was developed for use as an emulsifier and adjuvant for a variety of pesticide formulations. It can be used alone or in combination with other surfactants.
Properties
- Formulation Type
- Physical Form
- Appearance
- Clear, amber liquid (at 25°C)
- Soluble in
- Water, Methanol, Aromatic 200
- Insoluble in
- Mineral oil
- Typical Properties
- Toxicology Information
| Value | Units | Test Method / Conditions | |
| Density (at 25°C) | 1.04 | g/ml | — |
| Moisture | 0.1 | % | — |
| pH (5% in 1:1 IPA/H₂O) | 10.0 | — | — |
| Viscosity (at 25°C) | 440.0 | cps | — |
| Flash Point (PMCC) | min. 94 | °C | — |
| Pour Point | 10.0 | °C | — |
| Amine Value | 50.0 | — | — |
| Tertiary Amine | min. 96 | % | — |
| Approximate Moles (EO) | 0.2 | — | — |
| RVOC (U.S. EPA) | 0.0 | % | — |
| Specific Gravity (at 25°C) | 1.04 | — | — |
| Value | Units | Test Method / Conditions | |
| Toxicity (LD₅₀) | min. 5000 | mg/kg | — |
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Safety Precautions
- This product is non-irritating to skin and eyes when tested as sold.
- Normal safety precautions (i.e. gloves and safety goggles) should be employed when handling TOXIMUL TA surfactants.
- Contact with the eyes and prolonged contact with the skin should be avoided.
- Wash thoroughly after handling materials.
Workplace Exposure:
Occupational exposure can occur primarily through skin contact or via inhalation of vapors and mists. Engineering controls, personal protective equipment, and other workplace practices should be used to control these exposures.
Packaging & Availability
- Packaging Type
- Packaging Information
TOXIMUL TA-20 is available in drums, totes, and in bulk quantities.
Storage & Handling
- Storage and Handling Conditions
Bulk Storage Recommendations:
Stainless steel and glass fiber-reinforced polyester tanks are recommended. Many oven-cured phenolic and epoxy/phenolic linings may also be used. Elevated storage temperature may be desirable to maintain ease of pumping. Temperatures of up to 130°F (54°C) can be maintained for long periods of time without degradation of the product.
TOXIMUL TA surfactants which have been stored in drums at temperatures below 60°F (16°C) may thicken or solidify. The surfactants may be fluidized by warming with a drum heater or in a steam room. Drums should be vented prior to heating to avoid excessive pressure build up. Product temperatures of over 130°F (54°C) are not recommended.