Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Agrochemical Functions
- Technologies
- Product Families
Applications & Uses
- Markets
- Applications
- Applications
TOXIMUL TAABS series are 100% active anionic surfactant replacements. The products provide excellent emulsification when used alone or in combination with other nonionic surfactants.
Properties
- Formulation Type
- Physical Form
- Appearance
- Clear, amber liquid
- Soluble in
- Water, Methanol, Xylene
- Insoluble in
- Kerosene
- Typical Properties
Value Units Test Method / Conditions Density (at 25°C) 1.03 g/ml - Flash Point min. 94 °C PMCC Flash Point Tester Moisture Content max. 0.5 % - pH (5% in 1:1 IPA/H₂O) 5.5 - 6.5 - - Pour Point -18 °C - Regulated Volatile Organic Chemicals 0 % U.S. EPA Viscosity (at 25°C) 1120 cPs -
Regulatory & Compliance
- Chemical Inventories
- Clearances
- The TOXIMUL TAABS series are approved for use as inert ingredients under U.S. EPA 40 CFR 180.920. The TOXIMUL TAABS surfactants are regulated under TSCA Section 5(a) – “Significant New Use Rules” and Section 12(b) – “Export Notification”.
- Components of the TOXIMUL TAABS series are listed in the following countries: United States (TSCA).
Packaging & Availability
Storage & Handling
- Storage & Handling
- Normal safety precautions (i.e., gloves and safety goggles) should be employed when handling TOXIMUL TAABS surfactants. Contact with the eyes and prolonged contact with the skin should be avoided. Wash thoroughly after handling materials.
- Bulk Storage Information: Stainless steel and glass fiber-reinforced polyester tanks are recommended. Many oven-cured phenolic and epoxy/phenolic linings may also be used. Elevated storage temperature may be desirable to maintain ease of pumping. Temperatures up to 120°F (49°C) can be maintained for long periods of time without degradation of the products.
- TOXIMUL TAABS products which have been stored in drums at temperatures below 40°F (4°C) may thicken or solidify. They may be fluidized by warming with a drum heater or in a steam room. Drums should be vented prior to heating to avoid excessive pressure build up. Product temperatures over 120°F (49°C) are not recommended.