Products

WB 300used in NBR, ECO, and ACM to improve oil and fuel resistance. Due to its incompatibility with aliphatic hydrocarbons, mineral oils and greases, it will not leach from vulcanizates and thus minimizes hardening and shrinkage.

W 34 - A combination of zinc-free fatty acid derivatives. It is used as a filler dispersing agent in a wide range of polymers (NR, SBR, IIR, EPDM, CR, CSM, and ACM), and can be used in open mill production as well as production in internal mixers.

TPW 113 - Designed for filled olefin compounds as a processing aid and acts as a synergist to enhance properties and can be used with our without coupling agents.

WB 212 - A blend of high molecular weight, aliphatic fatty acid esters and condensation products. These processing aids are zinc-free and are designed to improve processing with no reduction in cured properties.

KW 600 - A plasticizer with extremely low pour point offering excellent low temperature flexibility.

STRUKTOL® HT 207 A zinc-free processing aid especially designed for use with silica-filled elastomers. It improves extrusion rate, reduces hysteresis, and reduces mill roll sticking. It has a slight activation effect in sulfur-cured compounds which in some instances is very desirable.

AW 1 - An antistatic plasticizer for mineral filled NBR, SBR, and NR compounds. A surface resistance as low as 1 x 106 Ohms can be achieved in NBR vulcanizates.

TR 052 - A versatile additive that has found many uses in polymer applications such as compatibilization of dissimilar materials, dispersing agent and flow modifier.

WB 700A - Coated zinc oxide with 91% ZnO for natural and synthetic rubber compounds.

40 MS - This homogenizing agent is particularly effective with those elastomer blends that tend to crumble at the beginning of the mixing cycle. It is used to improve the homogeneity of elastomers of different polarity and viscosity. It also reduces mill bagging behavior, extrusion rates are increased without increasing die swell, and calendering properties are improved. Increases the green tack of many compounds although it is not strictly a tackifier.

SCA 972PL - Promote adhesion of a polymer to an inorganic substrate or filler.Results areimproved wet and dry physical properties.

TR 121 - Oleamide used as a slip agent in polyolefins. Its uniform bloom makes it a valuable flow and release agent in thermoplastics and thermoset elastomers.

SU 95AF coated sulfurs contain dispersing and wetting agents and can be used to enhance sulfur dispersion in any natural or synthetic rubber compound. They are active dispersions of oil treated sulfur at the following activities: SU 95AF = 95% (soluble), SU 109A = 75% (insoluble), SU 120A = 83% (soluble), SU 135A = 75% (½ soluble and ½ insoluble).

RP 06 - RP 06 Odor modifiedRP 11 General purposeRP 23 When PE is presentRP 38 High efficiency when PE is presentVMO Series Low Odor

SU 109A coated sulfurs contain dispersing and wetting agents and can be used to enhance sulfur dispersion in any natural or synthetic rubber compound. They are active dispersions of oil treated sulfur at the following activities: SU 95AF = 95% (soluble), SU 109A = 75% (insoluble), SU 120A = 83% (soluble), SU 135A = 75% (½ soluble and ½ insoluble).

Zinc Laurate used in PVC stabilizer applications.

RP 17 - An odor control additive that is effective in polymer systems containing recycled rubber and plastics content. It is ideal for automotive and recycling applications for improving both odor during processing, as well as odor of the final part. It can also be used in polyethylene and polypropylene based wood-plastic composites.

TR 044W - Provides flow and metal release with little or no effect on physical properties in most polymers. The best choice for polar or engineering resins. Very good heat stability.

TPW 426 - Acts as an antioxidant, stabilizer, release agent and processing aid.

TR 041 - A nonionic, ester-based wetting agent for polar fillers and pigments used for improved dispersion and metal release. Contains no metal ions.

KW 400 - An easily soluble plasticizer used to improve the low temperature flexibility of all commonly used rubbers. NBR vulcanizates can be compounded to provide flexibility at temperatures as low as -55°C.

SU 135A coated sulfurs contain dispersing and wetting agents and can be used to enhance sulfur dispersion in any natural or synthetic rubber compound. They are active dispersions of oil treated sulfur at the following activities: SU 95AF = 95% (soluble), SU 109A = 75% (insoluble), SU 120A = 83% (soluble), SU 135A = 75% (½ soluble and ½ insoluble).

TR 131 - Erucic acid amide used as a higher temperature slip agent. Its slower migration rate is beneficial for printing films.

TPW 707 - A functional lubricant blend that offers superior filler wetting and processing characteristics in various polymer systems.

TR EBS VG - Ethylene bisstearamide wax for a wide range of polymers used for improved dispersion of pigments and fillers and viscosity modification. TR EBS VG is manufactured from high quality vegetable acid with low iodine value.

SCA 972WT - Promote adhesion of a polymer to an inorganic substrate or filler.Results areimproved wet and dry physical properties.

TR 141 - Stearic acid amide which blooms in an invisible monolayer for surface appearance and antiblocking. Improved surface in rotomolded compounds.

V-PETS - External lubricant for extruded profiles and molded goods.

WB 222 - A blend of high molecular weight, aliphatic fatty acid esters and condensation products. These processing aids are zinc-free and are designed to improve processing with no reduction in cured properties.

SU 120A coated sulfurs contain dispersing and wetting agents and can be used to enhance sulfur dispersion in any natural or synthetic rubber compound. They are active dispersions of oil treated sulfur at the following activities: SU 95AF = 95% (soluble), SU 109A = 75% (insoluble), SU 120A = 83% (soluble), SU 135A = 75% (½ soluble and ½ insoluble).

TR 016 - An extremely effective lubricant and wetting agent that can be used in a wide variety of polymer systems. Also provides release characteristics.