Knowde Enhanced TDS
Identification & Functionality
- Plastics & Elastomers Functions
- Technologies
Applications & Uses
- Markets
- Compatible Polymers & Resins
- Plastics & Elastomers Processing Methods
- Recommended Applications
One of the major uses of oleamide is as a slip agent in polyethylene films. It functions by migrating to the film surface in a microscopic coating which reduces the coefficient of friction. In general, oleamide migrates more rapidly than erucamide (STRUKTOL® TR 131) but has lesser heat stability. Where this is not a disadvantage, oleamide costs are inherently lower.
This same property of uniform surface bloom permits STRUKTOL® TR 121 to be used in injection molding applications. It functions as both a lubricant and mold release agent. These properties are valuable in processing thermoplastic resins, thermoplastic elastomers (TPEs) and thermoset rubber systems. STRUKTOL® TR 121 may also function as a dispersant in concentrates by providing easier and more uniform letdown of the concentrated material. STRUKTOL® TR 121 is insoluble in water and has limited solubility in alcohols, ketones and aromatic solvents.
- Dosage Level
- Applications in the rubber area normally require 1 - 3 phr loading levels.
- For plastics, these loadings may vary from around 0.05% in films to more than 0.5% in mold release applications.
- For PVC 0.05 - 0.6 %.
Properties
- CLTE - Transverse (-22 to 86°F)
- Light cream colored pastilles or beads
- Appearance
- Light Cream Colored Pastilles Or Beads
- Insoluble in
- Water
- Typical Properties
Value | Units | Test Method / Conditions | |
Acid Value | 3.0 | mg KOH/g | - |
Amide Content | 98.0 | % | - |
Gardner Color | 4.0 | - | - |
Iodine Value | 95.0 | - | - |
Melting Point | 70 - 76 | °C | - |
Regulatory & Compliance
- Certifications & Compliance
- Regulatory Status
STRUKTOL® TR 121 is sanctioned for use by the Food and Drug Administration (FDA) in a number of applications, listed in the following sections of Title 21 of the Code of Federal Regulations:
- 175.105 Adhesives
- 175.300 Resinous and polymeric coatings (can and cements)
- 178.3910 Surface lubricants used in the manufacture of metallic articles
- 179.45 Packaging materials for use during the radiation preservation of prepackaged foods
- 181.28 Release agents
Packaging & Availability
- Country Availability
- Regional Availability
Storage & Handling
- Shelf Life
- 24 Months
- Storage and Packaging
Storage Stability :
At least 2 years under normal storage conditions
Packaging :
55 lb. PE bags