company tower banner
Tasnee Company Logo

TALENE M4012 GY01

1 of 19 products in this brand
TALENE M4012 GY01 is a 40% talc filled polypropylene homopolymer with good flow and high stiffness. It has high long term heat aging stability. The product is available in gray color (RAL 7037). It is not intended for medical, pharmaceutical and/or drinking water applications.

Polymer Name: Polypropylene Homopolymer (HPP)

Processing Methods: Extrusion

Fillers Included: Talc

Melt Flow Index: 12.0 - 12.0 g/10 min

  • TypeDocument Name
View All Documents

Knowde Enhanced TDS

Identification & Functionality

Fillers Included
Plastics & Elastomers Functions
Technologies

Features & Benefits

Applications & Uses

Plastics & Elastomers Processing Methods
Typical Applications
It is intended for automotive lamp housing applications.

Properties

Color
Physical Form
Mechanical Properties
ValueUnitsTest Method / Conditions
Charpy Notched Impact Strength (at 23°C, Type1, Edgewise, Notch A)2.2kJ/m2ISO 179
Charpy Unnotched Impact Strength (at 23°C, Type1, Edgewise)26kJ/m2ISO 179
Flexural Modulus3700MPaISO 178
Flexural Strength (3.5%)47MPaISO 178
Tensile Modulus (Secant)3200MPaISO 527-1,-2
Tensile Strain at Break (50 mm/min)7%ISO 527-1,-2
Tensile Strain at Yield (50 mm/min)4%ISO 527-1,-2
Tensile Stress at Yield (at 50 mm/min)30MPaISO 527-1,-2
Physical Properties
ValueUnitsTest Method / Conditions
Density1.22g/cm3ISO 1183
Heat Distortion Temperature (at 0.45 MPa)119°CISO 75B-1, -2
Heat Distortion Temperature (at 1.80 MPa)70°CISO 75A-1, -2
Melt Flow Rate (230°C / 2.16 kg)12g / 10 minISO 1133
Vicat Softening Temperature (B50, 50°C/h,50N)89°CISO 306

Safety & Health

Safety
Workers should be protected from the possibility of skin or eye contact with molten polymer. As minimum precaution, safety glasses and heat resistance gloves are suggested to prevent mechanical or thermal injury to eyes and hands. Molten polymer exceeding processing condition requirements may degrade and release, fumes, vapors and unpleasant odor. In higher concentrations they may cause irritation of the mucus membranes. Fabrication areas should be ventilated to carry away fumes and vapors. Legislation on the control of emissions and pollution prevention must be observed. If the principles of sound manufacturing practice are adhered to and the place of work is well ventilated, no health hazards are involved in processing the material. The material may burn when supplied with excess heat and oxygen. It should be handled and stored away from contact with direct flames and/or ignition sources. In burning the material generates considerable heat and may release a dense black smoke. Fires should be extinguished by heavy foams or dry powder. For further information about safety in handling and processing please refer to the Safety Data Sheet (SDS).

Packaging & Availability

Packaging Type

Storage & Handling

Storage
The material is packed in 25 kg bags or in bulk containers protecting it from contamination. Product should be stored in dry conditions at temperatures below 50°C and protected from UV-light. Keep material completely dry for good processing. Improper storage may bring damage to the packaging and can negatively affects on the quality of this product. TASNEE will not give any warranty to unfavorable storage conditions which may lead to quality deterioration such as color change, bad smell and inferior product performance.