Products

Toray Toray Cetex® TC930 is a thermoplastic composite using a high density polyethylene (HDPE) matrix. This product is commonly used in pipe overwrapping Applicationss because of its high hoop strength, low modulus, and excellent chemical resistance. Toray Cetex® TC930 is available in a pigmented glass-reinforced tape. Indefinite at 25°C (77°F).

Toray Toray AmberTool® HX42 is a low temperature curing epoxy composite tooling prepreg. After a suitable post cure, an end use temperature of 190°C (374°F) is achieved. Toray AmberTool® HX42 is an exceptional and very well proven system that exhibits a high end use temperature and extended out life. 50–75°C (122–167°F) Low Temperature Curing Epoxy Tooling Prepreg.

Toray Toray MicroPly™ ES72A-2 is a 125°C (257°F) curing low-density, expanding, unsupported, epoxy syntactic core. ES72A-2 offers reduced processing, a one-shot cure, the ability to anchor inserts or fastenings, and increases the opportunity to consider lightweight, thin-walled composite sandwich structures. ES72A-2 can be easily contoured and shaped. Toray MicroPly™ ES72A-2 expands using a closed cell process ensuring complete homogeneous cell structure, the density/strength may be altered simply by changing cure pressure or limiting the volume available for expansion, the material is capable of expanding up to 650%. Toray MicroPly™ ES72A-2, formerly Amspand, is available in a variety of thicknesses down to 1 mm, and is supplied in sheets (625 mm x 400 mm).

Toray Toray Cetex® TC910 is a thermoplastic composite using a polyamide 6 (PA6) matrix resin. This product provides excellent mechanical performance at a good price-to-weight ratio. It features high strength and wear resistance and performs well at elevated temperatures. TC910 is also resistant to solvents. As a result of these attributes, Toray Cetex® TC910 is commonly used in a variety of automotive and transportation Applicationss. Secondary details in the final part may be injection overmolded using injection-grade polyamides. Toray Cetex® TC910 is available in glass or carbon reinforced UD tapes. Nylon 6-based Thermoplastic Composite. Indefinite at 25°C (77°F).

Toray BT250E-1 resin system is a 121°C (250°F) cure epoxy prepreg system with excellent toughness and strength. It provides an outstanding surface finish under vacuum-bag/oven-cure only. The resin system, which is self-adhesive to honeycomb and foam core, is MIL-R-9300 qualified and makes a great choice for many Applicationss in the low-tomedium-service temperature range.

Toray E745 is a 135°C (275°F) cure toughened epoxy component prepreg. E745 has been developed for impact structures and other mechanically demanding structural Applicationss. E745 can be impregnated into a range of fiber and fabric types. 135°C (275°F) Cure Mid Temperature Curing Toughened Epoxy Component Prepreg.

Toray Toray AmberTool® HX50 is a low temperature curing epoxy composite tooling prepreg. After a suitable post cure, an end use temperature of 180°C (356°F) is achieved. Toray AmberTool® HX50 achieves an excellent surface finish for small to medium sized autoclave tooling. 40–55°C (104–131°F) Low Temperature Curing Epoxy Tooling Prepreg.

Toray’s TC250 offers an excellent balance of toughness, mechanical properties, and hot/wet performance. It is easily processed via vacuum bag/oven, autoclave, or press curing operations. Although TC250 is a 130°C (265°F) cure system, it can be post cured for a higher dry and wet Tg, which enhance the product’s elevated temperature performance. TC250 can also be cured or freestanding post cured to 177°C (350°F) to increase its high temperature performance. TC250 is available with virtually all fiber reinforcements in uni-directional tape, slit unidirectional tape, woven, and non-woven prepreg forms. 130°C (265°F) Cure, Toughened Epoxy Resin System

Toray Toray Cetex® TC960 is a polypropylene-based thermoplastic uni-directional tape. It is part of Toray’s CFRT® (continuous fiber reinforced thermoplastic) line of industrial thermoplastic composites. This thermoplastic composite is designed for Applicationss that require high impact resistance, but where cost is a factor. The impact toughness of glass fiber/ polypropylene composites make them ideal for use in truck bodies, vehicles, and vehicle enclosures. Polypropylene Thermoplastic Composite. Indefinite at 25°C (77°F).

Toray C640 is a cyanate ester resin system suitable for curing between 70°C (158°F) and 135°C (275°F). The medium viscosity resin is pre-impregnated into high-performance fibers such as carbon, glass and aramid. The system is capable of withstanding very high temperatures and is inherently flame-retardant. After a suitable post cure, the glass transition temperature can be increased to as high as 335°C (635°F).

Toray Toraycon® 1101G-X53 is a Polybutylene Terephthalate (PBT) product filled with 15% glass fiber. It is available in Asia Pacific, Europe, or North America.Characteristics includes flame rated and good esthetics.

Toray E721-FR is a modified epoxy resin system of medium viscosity for cures at 120°C (248°F), pre-impregnated into high performance fibers such as carbon, glass, and aramid. Toray E721-FR offers excellent structural properties, flame retardancy, and exceptional toughness allowing direct lamination to honeycomb without the use of resin film. Toray E721-FR is designed for structural Applicationss in the motor racing, marine industries, and for a wide range of engineering Applicationss. If fire-retardant properties are not required, consult separate data sheet for Toray E720.

Toray E731 is a toughened epoxy resin system designed to deliver enhanced resin clarity for cosmetic components within high performance automotive. The resin formulation ensures that components are free from white-spots and exhibit high clarity.

Toray Toray AmberTool® HX32-1 New is an epoxy composite tooling prepreg. After a suitable post cure, an end use temperature of 140°C (284°F) is achieved. Toray AmberTool® HX32-1 prepreg is ideal for large tooling Applicationss. 65–80°C (149–176°F) Curing Epoxy Tooling Prepreg.

Toray Toyolac® TP88 is an Acrylonitrile Butadiene Styrene (ABS) product. It is available in Asia Pacific, Europe, or North America. Characteristics includess flame rated, flame retardant, antistatic and wear resistant.

Toray Toyolac® VX10G20 is an Acrylonitrile Butadiene Styrene + PBT (ABS+PBT) product filled with 20% glass fiber. It is available in Asia Pacific, Europe, or North America. Primary characteristic is flame rated.

Toray E750 is a toughened epoxy component prepreg developed for structural Applicationss within Formula 1 and high performance automotive. Toray E750 allows curing from 80°C (176°F) to 180°C (356°F) and can be impregnated into a range of fiber and fabric types.

Toray Amilan® CM1021TM is a Polyamide 6 (Nylon 6) product. It can be processed by extrusion and is available in Asia Pacific, Europe, or North America. Typical application includes Fabrics/Fibers. .

Toray Toray MicroPly™ SC72A is a 120°C (248°F) curing low-density unsupported epoxy syntactic core. Toray MicroPly™ SC72A offers reduced processing, a one-shot cure, the ability to anchor inserts or fastenings, and increases the opportunity to consider lightweight, thin-walled composite sandwich structures. Considerable cost reductions can be realized when SC72A replaces prepreg as the core material, and where sandwich cores below 3 mm are difficult to achieve in honeycomb core, Toray MicroPly™ is a superior alternative. Toray MicroPly™ SC72A is available in a variety of thicknesses down to 1 mm and is easily contoured and shaped. SC72A is supplied on a roll (15 m x 400 mm) or in sheets (625 mm x 400 mm). Toray MicroPly™ SC72A is compatible for co-cure with Toray E720 and E722 mid temperature curing prepregs.

Toray Toyolac® TP90-X02 is a Methyl Methacrylate / ABS (MABS) product. It is available in Asia Pacific, Europe, or North America. Characteristics includess flame rated, antistatic, wear resistant.

Toray TC420 is a flow-controlled high temperature cyanate ester resin, toughened to resist microcracking. TC420 is specifically formulated to facilitate production of large out-of-autoclave structures. It can act as a self-adhesive system and is resistant to microcracking. This resin represents a new family of next generation high temperature resins, film adhesives, syntactic paste and expanding foams for ultra-high temperature conditions. TC420 is easy to process, and yields low void laminates with a flexible cure cycle under vacuum-only pressure. This system is also autoclave processable. TC420 is an attractive alternative to bismaleimide (BMI) and polyimide resins.

Toray Toray AmberTool® HX56 is a low temperature curing epoxy composite tooling prepreg. After a suitable post cure, an end use temperature of 180°C (356°F) is achieved. Toray AmberTool® HX56 achieves an excellent surface finish for small to medium sized autoclave tooling.

Toray E722 is a 120°C (248°F) cure toughened epoxy component prepreg. E722 is designed for structural Applicationss in the motorsport and marine industries. Toray E722 would also suit general aircraft fittings, sporting equipment, and a wide range of engineering Applicationss. Toray E722 is compatible for co-cure with Toray MicroPly™ EF72, a 120°C (248°F) cure resin film, and Toray MicroPly™ SC72A syntactic core. 120°C (248°F) Cure Toughened Epoxy Resin System

Toray Toray AmberTool® TC40 is a BMI resin that which provides excellent elevated temperature properties and processability. Toray AmberTool TC40 has been designed for high temperature tooling Applicationss. BMI Tooling Prepreg.

Toray Toyolac® 100G-10 is an Acrylonitrile Butadiene Styrene (ABS) product filled with 10% glass fiber. It is available in Asia Pacific, Europe, or North America. Primary characteristic includes flame rated.

Toray Toraycon® 1164G-30 FE is a Polybutylene Terephthalate (PBT) product filled with 30% glass fiber. It is available in Asia Pacific, Europe, or North America. Primary characteristic includes flame rated.

8020 Rapi-Ply is a Outstanding vacuum-bag-only (out-of-autoclave) processing capability. No debulking required off Bi-layer form facilitates fast lay-up

Toray E732 is a snap cure toughened epoxy resin matrix optimized for press curing (compression molding) prepreg Applicationss. With a cure time of 4 minutes at 160°C (320°F), an onset Tg of 170°C (338°F) is achieved. At this higher temperature, medium-to-high production rates can be accomplished, with customers able to produce beyond 50,000 parts per year. Toray E732 is a versatile matrix with a range of processing options allowing a variety of automotive and industrial Applicationss to be realized.

Toray Amilan® CM1023G1000 is a Polyamide 6 (Nylon 6) product. It is available in Asia Pacific, Europe, or North America. Characteristics includes flame rated and wear resistant.

Aluminum Flex-Core® honeycomb utilizes either 5052 or 5056 alloy foil material and is available in two cell sizes. FlexCore® has unique cell configurations that significantly reduce anticlastic behavior and permit small radii of curvature without deformation of the cell walls or loss of mechanical properties. Aluminum Flex-Core® has been developed to allow the designer and fabricator freedom in the utilization of honeycomb for components requiring simple and compound curvatures. Highly contoured sandwich panels such as leading edges and flaps, nacelles, fairings, doors, and access covers, and other parabolic, spherical, and cylindrical shapes are prime Flex-Core® candidates. Duplicate die model and control tooling for aerospace use are also examples of Flex-Core® Applicationss. As with standard aluminum honeycomb, Flex-Core® provides controlled crush characteristics without rebound and thus curved energy absorption units become feasible and economical.

Toray E720 is a 120°C (248°F) cure toughened epoxy prepreg. E720 offers excellent adhesive properties, allowing direct lamination to honeycomb without the use of a film adhesive. E720 is designed for structural Applicationss in motorsport and marine industries. E720 would also suit general aircraft fittings, sporting equipment, and a wide range of engineering Applicationss. Toray E720 is compatible for co-cure with Toray’s 120°C (248°F) cure resin film MicroPly™ EF72 and syntactic core Toray MicroPly™ SC72A. If fire retardant properties are required, refer to Toray E721-FR. 120°C (248°F) Cure Toughened Epoxy Resin System

Toray 8020-FR is a modified epoxy resin system suitable for curing between 70°C (158°F) and 120°C (248°F). The medium viscosity resin is pre impregnated into high performance fibers such as carbon, glass and aramid. Toray 8020-FR offers excellent structural properties, flame retardance and toughness. Toray 8020-FR is designed for structural Applicationss in the motor racing, general industrial fabrications and marine industries and is suitable for a wide range of engineering Applicationss.

Toray Toray Cetex® TC920 is a high-impact strength polycarbonate/ABS blend designed for consumer electronics. It features a high-quality surface finish, is easily formable to the desired shape ranging from computer cases to smart phone cases. Intricate details can be easily overmolded for clips and brackets using injection grade PC/ABS. It is an amorphous polymer that can be easily painted or bonded. It is UL94 V0 rated. It is offered on unidirectional carbon fiber, glass fiber, or carbon fabrics for good fire resistance. Indefinite at 25°C (77°F).

Toray Toray MicroPly™ SC8020A is a low-density unsupported epoxy syntactic core. The material has been developed to offer a long out life and flexible cure schedules at 70°C to 130°C (158°F–266°F). Toray MicroPly™ SC8020A offers reduced processing, a one-shot cure, the ability to anchor inserts or fastenings, and increases the opportunity to consider lightweight, thin walled composite sandwich structures. Considerable cost reductions can be realized when SC8020A replaces prepreg as the core material, and where sandwich cores below 3 mm are difficult to achieve in honeycomb core, Toray MicroPly™ is a superior alternative. Toray MicroPly™ SC8020A is available in a variety of thicknesses down to 1 mm, is easily contoured and shaped. SC8020A is supplied on a roll (15 m x 400 mm) or in sheets (625 mm x 400 mm). Toray MicroPly™ SC8020A is compatible for co-cure with Toray’s E720, E722, and 8020 prepregs.

Toray Toyolac® 100G-30R is an Acrylonitrile Butadiene Styrene (ABS) product filled with 30% glass bead\glass fiber. It is available in Asia Pacific, Europe, or North America. Characteristics includes flame rated and warp resistant.

Toray Advanced Composites’ aluminum commercial (AAC) grade honeycomb core is manufactured from corrosionresistant 3003 alloy foil. Designed to offer industrial users and designers high strength-to-weight properties at relatively low cost, aluminum honeycomb is particularly suitable as a shear carrying core in adhesively bonded sandwich panel assemblies.