Products

HDK® H21 is a synthetic, hydrophobic, amorphous silica produced via flame hydrolysis. It is a white colloidal powder of high purity. HDK® H21 is used as a thickening and thixotropic agent in various applications such as composites, coatings, adhesives, and sealants, particularly in vinylester, epoxy, and polyurethane systems.

SILRES® H62 C is a liquid, solvent-free, one-part heat-curing phenyl silicone resin formulation. The product is ideal for impregnating the electrical coils of motors and generators. Besides, SILRES® H62 C can be used to provide hydrophobic properties to porous materials and as a binder for composites made of fibrous fillers, cloths, and woven or non-woven reinforcing materials. The formulation is ready-to-use and crosslinks under heat. While curing, SILRES® H62 C does not release chemical byproducts, so curing shrinkage is barely noticeable. The product also thermosets in thick layers, even when in contact with air. Fully cured SILRES® H62 C has excellent electrical insulation properties and outstanding long-term heat resistance. Additionally, it shows high stability against weathering, moisture, and UV light and can therefore be continuously exposed to constantly changing climatic conditions or UV radiation.

HDK® T30Plus is a synthetic, hydrophilic, amorphous silica produced via flame hydrolysis. It is a standard product widely used in various industrial applications. HDK® T30Plus is a white colloidal powder of high purity. It finds applications in inkjet paper, makeup, powder coatings, printing inks, and rheology control.

SILRES® K is a solution of a condensation-curing methyl silicone resin in toluene. The product can be used as a binder or as an impregnation agent for porous materials. Besides, SILRES® K is the ideal product for making tack-free prepregs with excellent storage stability. Fully cured SILRES® K has a very low carbon content and thus yields a high ash content when pyrolized. Composites made of SILRES® K show long-term stability against weathering, moisture, and UV light. They can therefore be continuously exposed to constantly changing climatic conditions, UV radiation, and temperatures significantly higher than 300 °C (572 °F). SILRES® K also provides water repellency and excellent electrical insulation properties to the respective composite materials.

HDK® H17 is a synthetic, hydrophobic, amorphous silica produced via flame hydrolysis. It is a white colloidal powder of high purity. HDK® H17 is used as a thickening and thixotropic agent in composites, coatings, adhesives, and sealants, particularly in vinylester, epoxy, and polyurethane systems.

HDK® H15 is a synthetic, hydrophobic, amorphous silica produced via flame hydrolysis. It is a white colloidal powder of high purity. HDK® H15 is commonly utilized as a thickening and thixotropic agent in coatings, printing inks, adhesives, cosmetics, and other applications. Additionally, it serves as a reinforcing filler in elastomers, particularly silicone elastomers. Moreover, HDK® H15 functions as a free flow additive in the production of technical powders.

HDK® T30 is a hydrophilic, synthetic, amorphous silica produced through flame hydrolysis. It is a standard product widely used in various industrial applications. HDK® T30 is a white colloidal powder of high purity. It finds application in inkjet paper, make-up, powder coatings, printing inks, and rheology control.

HDK® N20 is a synthetic, hydrophilic, amorphous silica produced through flame hydrolysis. It is a standard product widely used in various industrial applications. This white colloidal powder offers high purity and serves multiple purposes. One of the primary applications of HDK® N20 is as a thickening and thixotropic agent in organic systems such as unsaturated polyesters, coatings, printing inks, adhesives, and cosmetics. Additionally, it functions as a reinforcing filler in elastomers, particularly silicone elastomers.

VINNAPAS® UW 1 FS is a tasteless, solid, thermoplastic homopolymer. It is a clear and colorless resin obtained through the polymerization of vinyl acetate. This versatile product finds application in various fields, including fiber-reinforced plastics, adhesives, powder injection molding, and sound damping.

HDK® T40 is a standard synthetic, hydrophilic, amorphous silica produced via flame hydrolysis. It is a white colloidal powder of high purity commonly used in various industrial applications. HDK® T40 finds applications in flexographic printing, gravure printing, industrial wood coatings, inkjet paper, offset printing, and printing inks.

HDK® N20Plus is a hydrophilic, synthetic, amorphous silica produced through flame hydrolysis. It is a standard product widely used in various industrial applications. HDK® N20Plus is a white colloidal powder of high purity. It finds applications in offset printing and powder coatings.

HDK® H16 is a synthetic, hydrophobic, amorphous silica produced via flame hydrolysis. It is a white colloidal powder of high purity. HDK® H16 is applied as a thickening and thixotropic agent in composites, coatings, adhesives, and sealants, especially in vinylester, epoxy, and polyurethane systems. It also finds applications in adhesives.

CRA® 17 is a highly efficient controlled-release additive designed specifically for adjusting the release force of solvent-free DEHESIVE® systems. It offers exceptional performance in achieving the highest release values among all CRA® modifiers. Its key features include high efficiency, rapid curing, and stable release characteristics.

HDK® H18 is a synthetic, hydrophobic, amorphous silica produced via flame hydrolysis. It is a white colloidal powder of high purity. HDK® H18 is used as a thickening and thixotropic agent in composites, coatings, adhesives, and sealants, particularly in vinylester, epoxy, and polyurethane systems.

GENIOSIL® CS 2 is an unsaturated alkoxysilane. It is a clear, colorless liquid with a characteristic aromatic odor. In the presence of moisture, it hydrolyzes and liberates alcohol to form silanols that can react with themselves to form siloxanes. As it possesses both silyl and unsaturated organic groups, GENIOSIL® CS 2 acts as a molecular bridge between organic and inorganic substrates.

CRA® 21 is an exceptional controlled release additive specifically formulated for adjusting the release force in solvent-based DEHESIVE® systems. As a solvent-based additive, it delivers high release levels, making it highly efficient in its intended application. Additionally, CRA® 21 exhibits good release stability, ensuring consistent performance over time.

NEXIPAL® is a versatile EAP (Electroactive Polymer) laminate designed for actuators and capacitive sensors. It is composed of one or multiple ultrathin silicone layers, known as ELASTOSIL® Film, which have a thickness ranging from 20 to 400 µm. These silicone layers are coated with specialized electrodes, laminated together, and then precisely cut into the desired shape. Multiple layers can be stacked on top of each other to achieve the desired performance.

SILRES® H 44 is a powdered, condensation-curing phenyl silicone resin with excellent solubility in various organic solvents. The product can be used as a binder or as an impregnation agent for porous materials. Due to its compatibility with organic resins, SILRES® H 44 can also be used to modify or partly replace phenolic resins in the respective compounds. Compared to other silicone resins, SILRES® H 44 cures relatively quickly at elevated temperatures. It is therefore particularly suitable for fully automated production lines.

VINNAPAS® C 501 is a solid, colorless to pale yellowish copolymer of vinyl acetate and crotonic acid. Typical applications for VINNAPAS® C 501 include antishrinkage additives, composites, and resin modification for composites, such as fiber-reinforced plastics. VINNAPAS® C 501 is supplied in 25-kg paper bags.

VINNEX® 8803 is an innovative compound made from a vinyl acetate/vinyl laurate copolymer and polyvinyl acetate. It is a colorless, tasteless, and odorless thermoplastic resin that comes in a dosable form and can be easily melted. This product is specifically recommended as a highly efficient, low-profile additive for fiber-reinforced composites and polymer concrete-type applications. It also demonstrates excellent compatibility with biopolyesters such as PLA.

GENIOPLAST® PP 20A08 is a pelletized formulation consisting of 20% functional silicone dispersed in polypropylene. It has been specifically developed as a compounding additive for unfilled and filled thermoplastic polyolefin compounds. This product is odorless. When used within the recommended levels (0.5 - 2%), GENIOPLAST® PP 20A08 does not have a negative impact on the thermo-mechanical properties of the compounds it is added to. Additionally, due to its specific effect, the processing temperature of the polyolefin compound can be slightly lowered.

VINNAPAS® C 341 is a solid, colorless to pale yellowish copolymer of vinyl acetate and crotonic acid. Typical applications for VINNAPAS® C 341 include composites and resin modification for composites, such as fiber-reinforced plastics. VINNAPAS® C 341 is supplied in 25-kg paper bags.

VINNAPAS® LL 8251 is a solid copolymer of vinyl acetate and crotonic acid, ranging in color from colorless to pale yellowish. It finds typical applications in fiber reinforced plastics and resin modification for composites. The product is available in the form of solid flakes.

VINNAPAS® UW 2 FS is a solid, thermoplastic homopolymer. The resin is clear, colorless, and tasteless, and it is produced by polymerizing vinyl acetate. This versatile product finds typical applications in fiber-reinforced plastics, adhesives, powder injection molding, and sound damping.

CRA® 23 is a highly efficient controlled-release additive designed to adjust the release force in solvent-based DEHESIVE® systems. As a solvent-based controlled release agent, it provides exceptional release levels. Moreover, CRA® 23 exhibits good release stability, ensuring consistent performance over time. It also boasts an excellent bathing life.

SILRES® H60 A/B is a liquid, solvent-free, two-part phenyl silicone resin formulation. The product is a modification of the well-established SILRES® H62 C and is thus ideal for impregnating the electrical coils of motors. Besides, SILRES® H60 A/B can be used to provide hydrophobic properties to porous materials and as a binder for composites made of fibrous fillers, cloths, and woven or non-woven reinforcing materials. Fully cured SILRES® H60 A/B has excellent electrical insulation properties and outstanding long-term heat resistance. Additionally, it shows high stability against weathering, moisture, and UV light and can therefore be continuously exposed to constantly changing climatic conditions or UV radiation.

SILRES® MK Flakes is a condensation-curing methyl silicone resin with good solubility in various organic solvents. The product can be used as a binder or as an impregnation agent for porous materials. Besides, SILRES® MK Flakes is the ideal product for making tack-free prepregs with excellent storage stability. Fully cured SILRES® MK Flakes has the lowest carbon content of all WACKER silicone resins and thus yields a very high ash content when pyrolized. Composites made of SILRES® MK Flakes show long-term stability against weathering, moisture, and UV light. They can therefore be continuously exposed to constantly changing climatic conditions, UV radiation, and temperatures significantly higher than 300 °C (572 °F). SILRES® MK Flakes also provides water repellency and excellent electrical insulation properties to the respective composite materials.

SILRES® MK Powder is a condensation-curing methyl silicone resin with good solubility in various organic solvents. The product can be used as a binder or as an impregnation agent for porous materials. Additionally, SILRES® MK Powder is the ideal product for making tack-free prepregs with excellent storage stability. When fully cured, SILRES MK POWDER has the lowest carbon content among all WACKER silicone resins, resulting in a high ash content when pyrolized. Composites made of SILRES® MK Powder exhibit long-term stability against weathering, moisture, and UV light. They can be continuously exposed to changing climatic conditions, UV radiation, and temperatures exceeding 300 °C (572 °F). Furthermore, SILRES® MK Powder provides water repellency and excellent electrical insulation properties to the composite materials.

CRA® 42 is an exceptionally efficient controlled-release additive specifically designed to adjust the release force in solvent-free DEHESIVE® systems. It offers remarkable performance in achieving high release levels. Furthermore, CRA® 42 provides an extremely stable release, ensuring consistent and reliable results. It also boasts fast-curing properties.

CRA® eco 17 is an extremely efficient controlled release additive used for adjusting the release force of solvent-free DEHESIVE® systems. It is derived from renewable raw materials and complies with the "Standard REDcert²." CRA® eco 17 offers the highest release values among all CRA® modifiers.

VINNAPAS® UW 4 FS is a solid, thermoplastic homopolymer. The resin is clear, colorless, and tasteless, and it is produced by polymerizing vinyl acetate. Typical applications for VINNAPAS® UW 4 FS include fiber-reinforced plastics, adhesives, powder injection molding, and sound damping.

VINNEX® 8802 is an innovative compound made from a vinyl acetate/vinyl laurate copolymer and polyvinyl acetate. This thermoplastic resin is colorless, tasteless, and odorless, and it can be easily melted in its dosable form. It is specifically recommended as a highly efficient low profile additive (LPA) that offers a significantly improved LPA effect in vinyl ester resins, even at lower curing temperatures compared to conventional LPA grades. Furthermore, VINNEX® 8802 demonstrates excellent compatibility with biopolyesters like PLA.