Products

ELASTOSIL® RT 773 is a non-slump, condensation-curing RTV-2 silicone. When used with a curing agent from the WACKER® Catalyst T 77 series, it forms a self-bonding and durable silicone rubber. Cured ELASTOSIL® RT 773 offers excellent long-term stability against weathering, moisture, and UV light. The compressible silicone elastomer can continuously endure changing climatic conditions, UV radiation, and temperatures as high as 140°C (284°F) without damage.

SILRES® K is a solution of a condensation-curing methyl silicone resin in toluene. The product can be used as a binder or as an impregnation agent for porous materials. Besides, SILRES® K is the ideal product for making tack-free prepregs with excellent storage stability. Fully cured SILRES® K has a very low carbon content and thus yields a high ash content when pyrolized. Composites made of SILRES® K show long-term stability against weathering, moisture, and UV light. They can therefore be continuously exposed to constantly changing climatic conditions, UV radiation, and temperatures significantly higher than 300 °C (572 °F). SILRES® K also provides water repellency and excellent electrical insulation properties to the respective composite materials.

ELASTOSIL® RT 601 A/B is a pourable, addition-curing RTV-2 silicone rubber. It has a two-part formulation with a 9:1 mixing ratio. This product features low viscosity, medium cured hardness, and excellent tensile strength. The vulcanizate obtained is crystal clear and highly transparent. It is suitable for various applications such as all-round potting compound and the manufacture of molded articles through casting.

ELASTOSIL® RT 708 is a self-leveling, slightly thixotropic, one-part silicone that cures with heat. It is designed for potting and coating applications and can also be used as a surface adhesive when applied in a thin layer, such as through silk-screen printing. Once cured, ELASTOSIL® RT 708 exhibits excellent adhesion to various substrates and offers long-term stability against weathering, moisture, and UV light. The cured silicone rubber can withstand continuously changing climatic conditions, UV radiation, and temperatures as high as 230 °C (446 °F) without sustaining any damage.

ELASTOSIL® RT 705 is a self-leveling, slightly thixotropic, one-part silicone that cures with heat. It is primarily used for potting and coating applications but can also be used as a surface adhesive when applied in a thin layer, such as by silk-screen printing. Once cured, ELASTOSIL® RT 705 exhibits excellent adhesion to various substrates and demonstrates long-term stability against weathering, moisture, and UV light. The cured silicone rubber can withstand continuously changing climatic conditions, UV radiation, and temperatures as high as 230 °C (446 °F) without sustaining any damage.

ELASTOSIL® N9111 Grey is a non-slump, alkoxy-cure, one-component silicone that cures at room temperature under the influence of atmospheric moisture. Due to its shear-thinning nature, this product is easy to apply. The material starts curing upon contact with air humidity. It shows excellent primerless adhesion to many substrates, like glass, aluminum, stainless steel, PA, and PBT.

ELASTOSIL® RT 778 is a non-slump, condensation-curing RTV-2 silicone adhesive. When used with a curing agent from the WACKER® Catalyst T 77 series, it forms a self-bonding and durable silicone rubber. Cured ELASTOSIL® RT 778 offers excellent long-term stability against weathering, moisture, and UV light. The silicone elastomer can continuously endure changing climatic conditions, UV radiation, and temperatures up to 250°C (482°F) without damage.

ELASTOSIL® RT 771 is a self-leveling, condensation-curing RTV-2 silicone adhesive. When used with a curing agent from the WACKER® Catalyst T 77 series, it forms a self-bonding and durable silicone rubber. Cured ELASTOSIL® RT 771 offers excellent long-term stability against weathering, moisture, and UV light. The silicone elastomer can continuously withstand changing climatic conditions, UV radiation, and temperatures up to 180°C (356°F) without damage.

ELASTOSIL® RT 707 W is a flowable, one-part, heat-curing silicone used for potting and coating applications. The cured material demonstrates very good adhesion to many substrates and long-term stability against weathering, moisture, and UV light. The cured silicone rubber can continuously withstand constantly changing climatic conditions, UV radiation, and temperatures as high as 230°C (446°F) without sustaining damage.

ELASTOSIL® RT 702 is a one-part heat-curing silicone adhesive that exhibits non-slump properties. Once cured, ELASTOSIL® RT 702 demonstrates excellent adhesion to a wide range of substrates, along with long-term stability against weathering, moisture, and UV light. The cured silicone rubber can withstand constant exposure to varying climatic conditions, UV radiation, and temperatures up to 250 °C (482 °F) without sustaining any damage.

ELASTOSIL® N9111 White is a non-slump, non-corossive, alkoxy-cure, one-component silicone that cures at room temperature under the influence of atmospheric moisture. It is a multipurpose sealant and adhesive for the appliance, automotive, and electronics industries. Due to its shear-thinning nature, ELASTOSIL® N9111 White is easy to apply. The material starts curing upon contact with air humidity.

ELASTOSIL® RT 774 is a non-slump, condensation-curing RTV-2 silicone. When used with a curing agent from the WACKER® Catalyst T 77 series, it forms a self-bonding and durable silicone rubber. Cured ELASTOSIL® RT 774 offers excellent long-term stability against weathering, moisture, and UV light. The compressible silicone elastomer can continuously endure changing climatic conditions, UV radiation, and temperatures as high as 140°C (284°F) without damage.

ELASTOSIL® N9111 Black is a non-slump, alkoxy-cure, one-part silicone that cures at room temperature under the influence of atmospheric moisture and exhibits excellent adhesion to many substrates. Fully cured ELASTOSIL® N9111 Black has excellent flame retardant properties and shows long-term stability against weathering, moisture, and sunlight.

SILRES® H62 C is a liquid, solvent-free, one-part heat-curing phenyl silicone resin formulation. The product is ideal for impregnating the electrical coils of motors and generators. Besides, SILRES® H62 C can be used to provide hydrophobic properties to porous materials and as a binder for composites made of fibrous fillers, cloths, and woven or non-woven reinforcing materials. The formulation is ready-to-use and crosslinks under heat. While curing, SILRES® H62 C does not release chemical byproducts, so curing shrinkage is barely noticeable. The product also thermosets in thick layers, even when in contact with air. Fully cured SILRES® H62 C has excellent electrical insulation properties and outstanding long-term heat resistance. Additionally, it shows high stability against weathering, moisture, and UV light and can therefore be continuously exposed to constantly changing climatic conditions or UV radiation.

ELASTOSIL® RT 706 is a self-leveling, slightly thixotropic, one-part heat-curing silicone used for potting and coating applications. The cured material demonstrates very good adhesion to many substrates and long-term stability against weathering, moisture, and UV light. The cured silicone rubber can continuously withstand constantly changing climatic conditions, UV radiation, and temperatures as high as 230°C (446°F) without sustaining damage.

ELASTOSIL® RT 772 is a flowable, condensation-curing RTV-2 silicone used for potting and coating applications. When used with a curing agent from the WACKER® Catalyst T 77 series, it forms a self-bonding and durable silicone rubber. Cured ELASTOSIL® RT 772 offers excellent long-term stability against weathering, moisture, and UV light. The silicone elastomer can endure constantly changing climatic conditions, UV radiation, and temperatures as high as 230°C (446°F) without damage.

SILRES® H 44 is a powdered, condensation-curing phenyl silicone resin with excellent solubility in various organic solvents. The product can be used as a binder or as an impregnation agent for porous materials. Due to its compatibility with organic resins, SILRES® H 44 can also be used to modify or partly replace phenolic resins in the respective compounds. Compared to other silicone resins, SILRES® H 44 cures relatively quickly at elevated temperatures. It is therefore particularly suitable for fully automated production lines.

SEMICOSIL® 962 TC A/B is a gap filler paste material with excellent thermal conductivity. It is a two-part silicone rubber that is shear-thinning, easy to dispense, and non-slump. This addition-curing formulation cures at room temperature, resulting in a soft, flexible, and tacky rubber with outstanding thermal conductivity properties.

SILRES® MK Flakes is a condensation-curing methyl silicone resin with good solubility in various organic solvents. The product can be used as a binder or as an impregnation agent for porous materials. Besides, SILRES® MK Flakes is the ideal product for making tack-free prepregs with excellent storage stability. Fully cured SILRES® MK Flakes has the lowest carbon content of all WACKER silicone resins and thus yields a very high ash content when pyrolized. Composites made of SILRES® MK Flakes show long-term stability against weathering, moisture, and UV light. They can therefore be continuously exposed to constantly changing climatic conditions, UV radiation, and temperatures significantly higher than 300 °C (572 °F). SILRES® MK Flakes also provides water repellency and excellent electrical insulation properties to the respective composite materials.

SILRES® MK Powder is a condensation-curing methyl silicone resin with good solubility in various organic solvents. The product can be used as a binder or as an impregnation agent for porous materials. Additionally, SILRES® MK Powder is the ideal product for making tack-free prepregs with excellent storage stability. When fully cured, SILRES MK POWDER has the lowest carbon content among all WACKER silicone resins, resulting in a high ash content when pyrolized. Composites made of SILRES® MK Powder exhibit long-term stability against weathering, moisture, and UV light. They can be continuously exposed to changing climatic conditions, UV radiation, and temperatures exceeding 300 °C (572 °F). Furthermore, SILRES® MK Powder provides water repellency and excellent electrical insulation properties to the composite materials.

ELASTOSIL® R 501/75 OH is a peroxide-curing high-consistency silicone rubber (HCR) for the manufacture of flame retardant products. This product is recommended to be used in cable insulations for household, automotive, railway, marine, and aerospace applications where high flame retardancy is required.

WACKER® Catalyst T 77 Plus is a standard curing agent designed for condensation curing RTV-2 silicones. When used in conjunction with a base compound from the ELASTOSIL® RT or ELASTOSIL® M product series, it results in the formation of a durable and self-bonding silicone rubber upon curing. This catalyst offers the advantage of very fast curing at room temperature, and the curing speed can be adjusted by varying the mixing ratio.

WACKER® Catalyst T 77 is a standard curing agent specifically designed for condensation curing RTV-2 silicones. When combined with base compounds from the ELASTOSIL® RT or ELASTOSIL® M series, it forms a durable and self-bonding silicone rubber upon curing. This catalyst is in the form of a non-slump paste, ensuring ease of application. It is recommended to use a mixing ratio of 10:1 with the base compounds for optimal results.