Armorcoat

Armorcoat 969 Secondary Containment Coating Epoxy Floor Topping is a 100% epoxy, chemical and wear resistant topping for concrete, wood and steel. Armorcoat 969 is a two-part liquid system to which sand or inert granules are added. The surface texture depends on the type and amount of the granules used. Thickness of the AC 969 is approximately 1/8″ to 1/4″. Armorcoat 969 can be successfully used to:; Top surfaces such as trenches, warehouse floors and storage tank steps Patch tank containment areas and chemical loading pads Repair spalled concrete warehouses, industrial walk ways and irregular surfaces.

Armorcoat 969+ Secondary Containment Coating Epoxy Floor Topping is a 100% modified epoxy topping which bonds to damp concrete, withstands 98% sulfuric, HCL, nitric acids, caustics and many chemicals. The topping is tough and has excellent wear resistance. Armorcoat 969+ is a two-part liquid system to which sand or caustic inert granules are added. The surface texture depends on the type and amount of the granules used. Thickness of the AC 969+ is approximately 1/8″ to 1/4″. Armorcoat 969+ can be successfully used to:; Top surfaces such as: trenches, warehouse floors, storage tank steps and chemical loading ramps & docks Repair spalled concrete warehouses, industrial walk ways and irregular surfaces.

Armorcoat 969.2CFV Ceramic-Filled Tank Lining is a ceramic-filled coating system designed for trowel or brush application to steel and concrete. It is used to protect the substrate against strong chemicals encountered in the chemical and related industries. AC 969.2CFV is used especially for lining internal surfaces of pumps. It is also excellent for tanks, trenches, pump pads and curbs where resistance to chemical attack from caustics, salts, solvents, dilute oxidizing acids and oils is required. AC 969.2CFV can be applied to vertical, overhead and horizontal surfaces by brush or roller at a thickness of 35 to 65 mils.