Products

ALTON HM 1010 is a latent hardener for all type of melamine-formaldehyde resins particularly suggested for CPL and LPL process. High reactivity at pressing temperature. 100% chlorine free.

ALTON ES 911, improves the micro scratch resistance (mar resistance). Excellent performance on HPL laminates specially for unicolor. It doesn’t affect the resin transparency and the surface brilliance.

ALTON ES 501, special additive that helps to improve the bright effect on impregnated papers. The product’ s performance becomes evident during the lamination process, where temperature and pressure are able to produce a molecular structure that is specially light reflecting.

ALTON WLF 14 is a no foaming wetting agent for all type of amino resins. Formulated with the most up-to-date surfactants it avoids the use of any defoamers frequently source of trouble for a perfect surface impregnation.

ALTON MF 183 is a basic water-based internal wetting/release agent. It improves resin absorption during impregnation and coating to give fully saturated, smooth, homogeneous, crease-free papers. Its effective release action prevents encrustations and keeps presses clean, prolonging their active life and cutting down on unproductive maintenance time. Free from ethoxylated nonylphenol.

ALTON ES 400 is a water based dispersion of a selected aliphatic poliurethane, mainly developed to get a film able to offer adhesive properties at high temperature and at the same time, a dry touch at room temperature.

ALTON AT 839 is a mixture of up-to date polymers, prevents sheets from blocking caused by moisture absorption; when added into a resin, the surface properties, typically the oleo-hydro repellency, will be improved as effect of its cross-linking/ filming characteristics.

ALTON HM 1030 is a super latent catalyst for melamine-formaldehyde resin with superior latency below 100°C and good reactivity under press conditions. To be used when long resin flow is requested and to avoid heat marks on bottom side of the laminates when low pressure presses close in more than 2 seconds.

ALTON ES 285 is an antimicrobial product with a broad spectrum biocide that inhibits the growth of bacteria and fungi.

ALTON MF 184 represents the last generation of one-shot low foaming wetting-release agent. Preserving the peculiar qualities of the single additives, it is a semplified approach to paper impregnation recipe.

ALTON ES 1243, minimizes the effect of electrostatic discharge on laminate surface coated with thermosetting resins. It improves the dissipative properties of the laminate reducing the risk of sparking according to a mechanism based both on the intrinsic conductivity of the product and over its capacity to regulate the moisture absorption from the environment.ALTON ES 1243 help to reach the standard requested by the IEC 61340-5-1 and EN 1815 (walking test).

ALTON AT 837 is a water-based additive free from ethoxylated nonylphenol, waxes and fats and paraffin specially designed for impregnated paper production. Excellent anti-blocking properties at low dosages. Dosing ALTON AT 837 (0,1-0,2 %) with UF resin in the impregnation bath, the UF resin migration to the paper surface is strongly reduced.

ALTON R 1015 is a water-based low foaming release agents for all type of amino resins. They show superior release properties, do not affect surface trasparency and keep clean the plates surface for a long period.

ALTON HM 720 is a latent hardener for all type of melamine-formaldehyde resins particularly suggested for HPL process.It reduces curing time and increase productivity. It is 100% chlorine free.

ALTON 856 is a basic internal water-based release agent free from ethoxylated nonylphenol, waxes and paraffines.High release efficiency.

ALTON R 1014 is a water-based low foaming release agents for all type of amino resins. They show superior release properties, do not affect surface trasparency and keep clean the plates surface for a long period.

ALTON HM 1448 is a latent hardener for urea-formaldehyde resins. It assures right reactivity and longer resin pot life. It is 100% chlorine free.

ALTON PLAST 58 has been developed to plasticize melamine and phenol resins for standard and post-forming laminates. It reacts with the resin making a unique net without the formation of any by-products.

ALTON HM 3015 is a latent hardener for melamine-formaldehyde resins mainly for low pressure technology.Its latency assures longer pot life of resin bath and fast reactivity under press. 100% chlorine free.

ALTON HM 4000 is suggested when long flow of the resin is required for instance under presses with slow closing time or when engraved plates are used. It is 100% chlorine free.

ALTON WLF 15 is a superior high concentrated no foaming wetting agent for all type of amino resins. It enables to strongly drop the resin surface tension with consequent both high wettability and flow promotion.

ALTON R 1000 internal water-based low foaming release agent free from ethoxylated nonylphenol, waxes and paraffin. It shows an excellent compatibility with all types of resins and does not affect the surface transparency. The special composition enables to get homogeneous and smooth finish.

ALTON ES 934 is a new additive to improve wear resistance and anti-mar properties of surfaces treated with melamine-formaldehyde resin. It is a mixture of inorganic micro and nano-particles with a high surface area coverage. It enables to improve micro scratch resistance preserving gloss and paper flexibility. It is suitable both for application via impregnation bath or through the coater. High solid content, good compatibility with the resin, easy to handle and use.

ALTON HM 500 is a latent hardener for phenol-melamine-formaldheyde resins. Specially suggested for CPL technology to prepare kraft paper impregnated with PMF. It is 100% chlorine free.

ALTON 883 is a basic water-based wetting agent. It shows effectiveness in reducing resins surface tension and improves resin flow. Free from ethoxylated nonylphenols.