Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Typical Applications
High voltage insulation for power industry such as cable accessory and insulator
- How to Use
A static metering and mixing unit is recommended to feed the mixture of part A and part B in the ratio 1:1 to the injection molding machine. If air bubbles are entrapped during mixing, the mixture must be thoroughly degassed under vacuum. The standard curing temperature is 120-150℃ and the curing time also depends on the thickness of rubber products.
- Processing
- Please exactly control the mixing ratio of part A and part B, otherwise curing process and product properties may be affected.
- The curing time, which depends on curing temperature and the thickness of rubber products, should be adjusted to meet the production needs.
- Please strictly avoid the contact with certain materials such as amines, sulfur, phosphor and tin, which will adversely affect the curing process or even result in no curing.
Properties
- Appearance
- Translucent
- Typical Properties
- Electrical Properties
- Cured Properties
| Value | Units | Test Method / Conditions | |
| Solids Content | 100 | % | — |
| Viscosity | 2000 | Pa.s | — |
| Hardness (2mm thickness slabs molded 8 minutes at 150°C) | 40 | shore A | — |
| Tensile Strength (2mm thickness slabs molded 8 minutes at 150°C) | 8 | mPa | — |
| Tear Strength (2mm thickness slabs molded 8 minutes at 150°C) | 22 | kN/m | — |
| Elongation (2mm thickness slabs molded 8 minutes at 150°C) | 450 | % | — |
| Value | Units | Test Method / Conditions | |
| Dielectric Strength (1mm thickness slabs molded 8 minutes at 150°C) | 24 | kV/mm | — |
| Volume Resistivity (1mm thickness slabs molded 8 minutes at 150°C) | 10^16 | Ohm.cm | — |
| Dissipation Factor (1mm thickness slabs molded 8 minutes at 150°C) | 0.01 | — | — |
| Tracking Resistance (1mm thickness slabs molded 8 minutes at 150°C) | 3.5 | — | — |
| Value | Units | Test Method / Conditions | |
| T10 5 minutes at 150°C | 11 | s | — |
| T90 5 minutes at 150°C | 33 | s | — |
Packaging & Availability
- Packaging Type
- Packaging
20kg PE lined plastic pails or 200kg PE lined metal drums.
Storage & Handling
- Storage and Transportation
- Keep in cool and well ventilated place from rain, moisture and sunlight. When stored in the original unopened containers, this product has a shelf life of 6 months from the date of manufacture. The containers should be sealed tightly after use.
- This product can be shipped as non-hazardous goods. Avoid fall, upside down and collision with hard objects during transportation