Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Specific Features
- Electrically conductive
- Reduced volatile content
Applications & Uses
- Markets
- Plastics & Elastomers Processing Methods
- Applications
- General Automotive Parts
- Molded Parts
- Application Details
These grades are particularly suitable for the economical production of large series of injection-molded electrically conductive articles. Parts made from ELASTOSIL® LR 3162 A/B can be used for technical applications, but do not comply with regulations concerning use in the pharmaceutical and food industry.
Processing
The A and B components are delivered ready to use in 20 kg pail and 200 kg drum kits. With adequate metering equipment, they can be pumped directly from the original containers into the injection molding machine and mixed by a static mixer. The mixing ratio is 1 : 1. At room temperature, mixtures of A and B components have a pot life of at least 8 hours.
Properties
- Physical Form
- Cured Properties
- Uncured Properties
- Properties
The vulcanizates are noted for good mechanical as well as electrical properties and for good heat resistance within a temperature range of -55°C to +210°C.
- Note
Cure conditions : 10 min /165°C in press.
Value | Units | Test Method / Conditions | |
Density | 1.12 | g/cm³ | DIN EN ISO 1183-1 A |
Elongation (at break) | 340 | % | ISO 37 Type 1 |
Rebound Resilience | 54 | % | ISO 4662 |
Shore Hardness A | 54 | — | DIN ISO 48-4 |
Tear Strength | 14 | N/mm | ASTM D 624 B |
Tensile Strength | 5.3 | N/mm² | ISO 37 Type 1 |
Volume Resistivity | 11 | Ohm-cm | IEC 62631-3-1 |
Value | Units | Test Method / Conditions | |
Dynamic Viscosity (Shear rate 1 s⁻¹) | 5700000 | mPa·s | DIN EN ISO 3219 |
Dynamic Viscosity (Shear rate 10 s⁻¹) | 800000 | mPa·s | DIN EN ISO 3219 |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Country Availability
- Regional Availability
- Packaging Information
This product is available in 20 kg pail and 200 kg drum kits.
Storage & Handling
- Storage Information
Once opened, containers should always be resealed after use to prevent the platinum catalyst from being poisoned by amines, sulfur or phosphorus compounds.