Products

LEXOLUBE KL-435 is a complex polyol ester that provides robust solutions for high temperature applications. It is carefully manufactured to provide little or no residual carboxylic acid. This leads to better emulsion stability, and bio-resistance when properly formulated.

LUBRICIT PE 510/1 is a low viscosity polyol ester that is used as a synthetic base oil for formulations requiring wide temperature operating range, low volatility and good oxidative stability.

LUBRICIT TMP C9 is a low viscosity polyol ester that is used as a synthetic base oil for formulations requiring wide temperature operating range, low volatility and good oxidative stability. The product has achieved the HX-1 designation by NSF International, qualifying it as a lubricant basestock for incidental food contact.

LEXOLUBE GT-855IG HX1 fluid is a 100% biobased synthetic triester base fluid for food processing industry applications. It achieves the NSF international HX-1 listing for incidental food contact under the requirements of FDA 21 CFR 178.3570. Food Plants that use exclusively H1 lubricants do not need to report under the HACCP hazard requirement.

LUBRICIT PE iC18 is a polyol ester that provides lubricity, detergency, and additive compatibility in a wide range of applications. This product is useful in applications where good oxidative stability, low temperature fluidity, and high bioderived content are required.

LEXOLUBE CLG-460 is a complex polyol ester that provides robust solutions for high temperature applications. It is carefully manufactured to provide little or no residual carboxylic acid. This leads to better emulsion stability, and bio-resistance when properly formulated. LEXOLUBE CG-3000 has achieved the NSF international HX-1 ranking for incidental food contact under the requirements of FDA 21 CFR 178.3570. With greater than 70% renewable content and high biodegradability, the product in on the LuSC list, making it a great choice for any EAL formula, such as those required by the Vessel General Permit (VGP) or EcoLabel.

LEXOLUBE PQ-68 is a pentaerythritol ester that provides lubricity, detergency, low temperature fluidity and additive compatibility in a wide range of applications. It is optimal in terms of oxidation, and is useful as a base oil and an additive for most applications requiring high temperature stability such as 2 and 4 stroke oils, compressor oils, hydraulic fluids, greases and gear oils.

LUBRICIT PE 418 is an oleic acid based polyol ester. It is environmentally friendly with high bioderived content and offers outstanding lubricity and low volatility. The polyol core structure provides good hydrolytic and thermal stability, making it an excellent choice for hydraulic fluids, gear oils, and metalworking applications.

LUBRICIT TMP C810 is a polyol ester that provides lubricity, detergency, and additive compatibility in a wide range of applications. This product is useful in applications where good oxidative stability, low temperature fluidity, and high bioderived content are required. The product has achieved the HX-1 designation by NSF International, qualifying it as a lubricant basestock for incidental food contact.

LUBRICIT TMP C18-VEG is an oleic acid based polyol ester on the LuSC list. It is environmentally friendly and offers outstanding lubricity and low volatility. In addition, the polyol core structure provides good hydrolytic and thermal stability, making it an excellent choice for hydraulic fluids, gear oils, and metalworking applications meeting EU EcoLabel requirements. It is NSF listed as HX-1, and can be used in applications where incidental food contact is possible. The VEG version utilizes select vegetable derived oleic fatty acids.

LEXOLUBE CPE-70 is a complex polyol ester that provides cost-effective solutions for a wide range of applications such as textile (tenter frame), fiberglass production, and wood laminating. It is useful as a synthetic base stock for most applications requiring high temperature stability. It features oxidation resistance, lubricity, and thermal stability for low deposit formation.

LUBRICIT DOS is an sebacate diester fluid that is used as a synthetic base oil for formulations requiring exceptional low temperature flow properties. Sebacate diesters are often added to Group III and IV based lubricants to improve additive solubility, reduce varnish, and extend fluid life.

LUBRICIT DIOA is an adipate diester fluid that is used as a synthetic base oil for formulations requiring exceptional low temperature flow properties, such as compressors and grease. Adipate diesters are often added to Group III and IV based lubricants to improve additive solubility, reduce varnish, and extend fluid life.

LUBRICIT 2-EHL is a medium chain fatty acid ester that provides excellent metal adhesion and a low friction tribofilm. It may be used as a lubricity additive or friction modifier for a broad range of metalworking applications.

LEXOLUBE IPP is a long chain fatty acid monoester. Isopropyl esters are partially branched structures that resist hydrolysis and are well suited for use in water-based metalworking fluids.

LEXOLUBE IPO is a long chain fatty acid monoester listed by NSF as HX-1 for incidental food contact. Isopropyl esters are partially branched structures that resist hydrolysis and are well suited for use in water-based metalworking fluids.

LUBRICIT 2-EHD/1 is a dimerate fluid that is used as a synthetic base oil for formulations requiring outstanding low temperature flow properties. Dimer esters offer high bioderived content are often added to Group III and IV based lubricants to improve additive solubility, reduce varnish, and extend fluid life.

LUBRICIT DIDA is an adipate diester fluid that is used as a synthetic base oil for formulations requiring exceptional low temperature flow properties. Adipate diesters are often added to Group III and IV based lubricants to improve additive solubility, reduce varnish, and extend fluid life.

LUBRICIT 2-EHO is a long chain fatty acid ester that provides excellent metal adhesion and a low friction tribofilm. It may be used as a base fluid or friction modifier for a broad range of metalworking applications.

LEXOLUBE CQ-3000 is an environmentally friendly, high viscosity synthetic complex ester designed for superior thermal and oxidative stability. It is compatible with other synthetic esters, PAO and mineral oils. It can be used as a viscosity modifier, while also improving performance in high temperature lubricant applications that exceed 200°C. LEXOLUBE CQ-3000 provides excellent boundary protection, and can be used as an antiwear/extreme pressure additive to eliminate or reduce chlorine, sulfur and/or phosphorus additives in lubricant formulations. LEXOLUBE CQ-3000 is a USDA Certified Biobased Product with high biodegradability that is also on the LuSC list, making it a great choice for Vessel General Permit (VGP) or EcoLabel products.

LUBRICIT GMT is a glycerol mono/diester derived from natural fatty acids. It is environmentally friendly and offers outstanding lubricity and low volatility. This LuSC listed product has 100% bioderived content, high biodegradability and low aquatic toxicity which make it an excellent choice for EcoLabel hydraulic fluids, gear oils, and metalworking applications.

LUBRICIT 2-EHD is a dimerate fluid that is used as a synthetic base oil for formulations requiring outstanding low temperature flow properties. Dimer esters offer high bioderived content are often added to Group III and IV based lubricants to improve additive solubility, reduce varnish, and extend fluid life.

LUBRICIT DTDA is an adipate diester fluid that is used as a synthetic base oil for formulations requiring outstanding low temperature flow properties. Adipate diesters are often added to Group III and IV based lubricants to improve additive solubility, reduce varnish, and extend fluid life.

LEXOLUBE HS-C is a patented, hydrolytically stable ester that is well suited for use in water-based metalworking fluids as a base stock or additive component.

LUBRICIT GMO is a glycerol monooleate derived from natural fatty acids. It is environmentally friendly and offers outstanding lubricity and low volatility. This LuSC listed product has 100% bioderived content, high biodegradability and low aquatic toxicity which make it an excellent choice for EcoLabel hydraulic fluids, gear oils, and metalworking applications.

LUBRICIT GTO is a glycerol trioleate derived from natural fatty acids. It is environmentally friendly and offers outstanding lubricity and low volatility. 100% bioderived content, high biodegradability and low aquatic toxicity make it an excellent choice for EcoLabel hydraulic fluids, gear oils, and metalworking applications.

LUBRICIT 9538/1 is a complex dimer ester. It provides cost-effective solutions for a wide range of applications such as textile (tenter frame), fiberglass production, and wood laminating. It is useful as a synthetic base stock for most applications requiring high temperature stability. It features oxidation resistance, lubricity, and thermal stability for low deposit formation. LEXOLUBE 9538/1 has achieved the NSF international HX-1 ranking for incidental food contact under the requirements of FDA 21 CFR 178.3570.

LEXOLUBE 3I-310 is a polyol ester that provides lubricity, detergency, and additive compatibility in a wide range of applications. This product is optimal in terms of oxidation, and is useful as a base oil and additive for most applications requiring high temperature stability such as compressor/gear oils, hydraulic fluids, grease formulations, as well as 2 and 4 stroke oils.

LUBRICIT PGDO is an oleic acid based diester with high viscosity index and high bioderived content. It is environmentally friendly and offers outstanding lubricity and low volatility. In addition, the structure provides good hydrolytic and thermal stability, making it a good choice for hydraulic fluids, gear oils, and metalworking applications.

LUBRICIT 9522 is a complex dimer ester. It provides cost-effective solutions for a wide range of applications such as textile (tenter frame), fiberglass production, and wood laminating. It is useful as a synthetic base stock for most applications requiring high temperature stability. It features oxidation resistance, lubricity, and thermal stability for low deposit formation.

LUBRICIT 9526 is a complex polyol ester. It provides cost-effective solutions for a wide range of applications such as textile (tenter frame), fiberglass production, and wood laminating. It is useful as a synthetic base stock for most applications requiring high temperature stability. It features oxidation resistance, lubricity, and thermal stability for low deposit formation. LEXOLUBE 9526 has achieved the NSF international HX-1 ranking for incidental food contact under the requirements of FDA 21 CFR 178.3570.

LUBRICIT DTDA/1 is an adipate diester fluid that is used as a synthetic base oil for formulations requiring outstanding low temperature flow properties. Adipate diesters are often added to Group III and IV based lubricants to improve additive solubility, reduce varnish, and extend fluid life.

LUBRICIT DOA is an adipate diester fluid that is used as a synthetic base oil for formulations requireing outstanding low temperature flow properties. Adipate diesters are often added to Group III and IV based lubricants to improve additive solubility, reduce varnish, and extend fluid life.

LUBRICIT NGDO is an oleic acid based polyol diester with high viscosity index and high bioderived content. It is environmentally friendly and offers outstanding lubricity and low volatility. In addition, the polyol core structure provides good hydrolytic and thermal stability, making it a good choice for hydraulic fluids, gear oils, and metalworking applications.

LUBRICIT DIDS is a sebacate diester fluid that is used as a synthetic base oil for formulations requiring exceptional low temperature flow properties. Sebacate diesters are often added to Group III and IV based lubricants to improve additive solubility, reduce varnish, and extend fluid life.

LUBRICIT 9515 is a polyol ester that is used as a synthetic base oil for formulations requiring wide temperature operating range and good oxidative stability.