Brands in Construction Adhesives

Waterborne epoxy dispersion and epoxy hardener for lower-VOC, high-performance anticorrosion industrial and construction coatings

Methacrylate monomers are used in the production and modification of a wide variety of polymers – such as cast sheet, methacrylate molding compounds, artificial marble or PVC modifiers.

The Gabrosa granular grades are characterized by a lump free dispersion and fast dissolution in water. Gabrosa adhesives can be applied easily with a brush or pasting machine, exhibit excellent wet tack and (re-)positioning properties, have a more than sufficient open time and adhere strong on all kind of surfaces. Nouryon is supplier of Blisterfree wallpaper adhesives. Due to their excellent properties the base products can be used as standalone adhesive. To optimize requirements the Gabrosa grades can also be used in blends.

Acronal® is a range water-based emulsions. Acronal® range for exterior paints covers styrene and pure acrylics which offer a very high durability against the influence of weathering. Acronal® range for wood and trim paints offer a very high durability against the influence of weathering. In addition, our styrene acrylics have an outstanding chemical resistance, which is very important for exterior applications. BTC’s range of Acronal® dispersions covers both selfcrosslinking and non selfcrosslinking dispersions. BTC’s range of Acronal® types give decorative foils, filters and wallpaper excellent mechanical properties. In air and oil filters for the automotive industry they improve durability and performance. In high-quality decorative paper foil, our binders ensure a high level of stability of the bonded fibers. To abrasives our binders ensure the abrasives flexibility and reduce abrasive particle wear. BTC’s Acronal® types for natural fibers are acrylic dispersions. BTC’s range of Acronal® types give nonwovens made of synthetic fibers their exceptional and different functional properties.

Excellent Adhesion, Mechanically Stable

DIACRON™ are saturated copolymerized polyester resins used for coatings, inks, and adhesive applications. They have good adhesion to metals, polyester film, polycarbonate, and can be cross-linked with isocyanates, melamine, and epoxies. *DIACRON™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Texicryl® emulsion used to enhance the workability and technical performance of products being supplied into the building and decoration market.A diverse range of thickeners and binders for the Artist Colors market. It can also be used in water-based styrene acrylic emulsion polymers and solid resins specifically developed for graphic art applications, as a rheology modifiers for Hand Cleanser applications.With over 60 years’ experience, our range of PVA / acrylic binders and inverse emulsion thickeners deliver high performance in textile and furnishing products.

Rheovis® types are rheology modifiers that enable formulators to adjust the flow behavior of their automotive & industrial coatings products. That way they benefit from improved viscosity behavior and application characteristics.

Mailose™ ME series is Methyl hydorxyethyl Cellulose. It is widely used in drymix mortar industry. Could be soluble in water and form the transparent solution.  As the important additives in mortar, Methyl Hydroxyethyl Cellulose could increase the water retention, increase the workability and increase open time etc.

Fintac is a modified rosin which offers an excellent combination of oxidation and crystallization resistance. This product functions as a tackifier for SBR, natural rubber, butyl rubber, ethylene-vinyl acetate and other polymers. It can be delivered in flaked and solid forms. Formulated in solvent-based and water-based adhesives, it exhibits no tendency to crystallize. It meets the requirements of the Code of Federal Regulations, Title 21, under the following section: 175.105 Adhesives; 176.210 Defoaming Agents Used in the Manufacture of Paper and Paperboard; 177.2600 Rubber Articles Intended for Repeated Use.

GENIOSIL® XT grades expand the formulation capabilities with silane-terminated polymers. These new grades have been optimized to be low in viscosity but displaying a high number of silyl groups per unit volume. Consequently, the new polymers build up a solid, yet elastic network as they cure. The resulting adhesive layers and waterproofing membranes based on GENIOSIL® XT attain high inner strength, remain extremely elastic and exhibit outstanding tear resistance. Thus they are the products of choice for industrial applications.

Aktifit is an activated Silfit Z 91 produced by modifying the surface with functional silanes. The by-products split off during the treatment reaction are largely removed during the production process which firmly attaches the silane to the filler surface. This helps minimize undesirable side effects, as they are potentially encountered with in-situ mixing (direct addition of silane to the compound).

GENIOSIL® XB for the first time exploit the advantages of silane crosslinking for user-friendly, environmentally compatible structural adhesive bonds. Thanks to their low viscosity, they can be easily compounded without using plasticizers or solvents. Moreover, the use of tin catalysts can now also be eliminated.

​TECKROS®...The widest range of rosin ester and other rosin tackifiers in the industry to meet customer performance and supply assurance needs includes many useful choices in color, softening point, acid value, polarity, and molecular structure.

UNI-REZ™ thixotropic polyamides provide performance well beyond the capabilities of other competing technologies for controlling the rheology of structured non-drip gloss paints and varnishes. Kraton thixotropic grades are non-reactive polyamide resin for use in thixotropic alkyds.

VINNAPAS® is WACKER’s brand name for a versatile range of polymer-based dispersions, powders and resins that are used to improve the properties and performance of products in a wide range of industries. The portfolio has been continuously improved and optimized since the 1950s. Thus, VINNAPAS® products set the standard and are leading in many applications.

Mailose™ MP series is Hydroxyporpyl Methyl Cellulose. It is widely used in drymix mortar industry. Could be soluble in water and form the transparent solution.  As the important additives in mortar, Hydroxyproypl methyl Cellulose could increase the water retention, increase the workability and increase open time etc.

PHENODUR® phenolic resins mainly find use in industrial and packaging coatings, in combination with other types of resins, such as epoxies, acrylics and polyesters. PHENODUR®specially formulated solvent-based and waterborne resins are designed for use in coatings applied to the interior of metal food containers, and include phenolic resin systems that can be used to make Bisphenol A- and BADGE-free interior can coatings.

Winlex is a light-colored rosin ester, which has been stabilized. It provides particularly good skinning resistance and color stability in Ethylene Vinyl Acetate (EVA) hot melt adhesives. It has a suitable FDA status for use in food packaging applications covered by 175.105.