Brands in Sealants & Caulks

20 Microns pioneered unique processing methods and applications expertise for calcination along with fine particle technology, and today our fine particle Calcined Kaolins are the most widely used worldwide in numerous applications from Coatings to Plastics and Paper to Construction and Adhesives to Rubber and Wire & Cable. Delivering the highest gloss, our ultra-fine Calcined Kaolins are the perfect complement in high Carbonate Coating formulations to optimize properties and Printability. 20 Microns offers a variety of Calcined Kaolins calcined at medium to high temperatures depending on end applications for its customers across the globe. Our Hyper series is Silane treated Calcined Kaolin with different organo silane as per the end application requirement. The highly pulverized and coating technology imparts excellent homogenous dispersion in polymeric and rubber compounds. These are high-performance reinforcing extenders providing better dispersion, significantly improving dielectric and mechanical properties like tensile strength, modulus, abrasion resistance, and shore hardness. It is widely accepted as a suitable replacement for conventional reinforcing fillers in the rubber industry.

Sodium Omadine® is a zero-VOC solution of the trusted antimicrobial sodium pyrithione, and can effectively inhibit the growth of bacteria and fungi in a wide variety of household products in areas such laundry care, surface cleaning and aircare.

Tinuvin® light stabilizers show best performances regarding their thermal stability, substrate compatibility, volatility, absorption range, or regulatory classification as needed. BTC’s Tinuvin® light stabilizers provide effective protection against UV absorption for inks and printing.

Addition of DISPARLON® provides thixotropy with good shear thinning for ease of application, gunability and excellent slump control/bead formation. DISPARLON provides a balanced mix of performance benefits for both waterborne and solventborne adhesive and sealant applications.

Waterborne epoxy dispersion and epoxy hardener for lower-VOC, high-performance anticorrosion industrial and construction coatings

Geotex® calcium carbonate is a line of coarse screened calcium carbonate products produced from high purity white marble mined in Marble Hill, Georgia. Each product is sifted through different sized screens to produce consistent material for a variety of applications. The Geotex Series is part of the entire Huber family of solutions. Other products include Alumina Trihydrate (ATH), Barium Sulfate, Magnesium Hydroxide (MDH), Silica and Silicates.

MARTINAL® aluminum hydroxide (ATH) and MAGNIFIN® magnesium hydroxide (MDH) are halogen-free fire retardant additives that have proven themselves over time as dependable stalwarts that have met and exceeded the demanding requirements of compounders and producers. The environmentally-friendly MARTINAL® and MAGNIFIN® products are non-corrosive, inert and without effect of pigmentation smoke suppressors. MARTINAL® and MAGNIFIN® flame retardants are available in various grades, tailor-made precisely to the specific properties of major plastic systems meeting the most stringent requirements of the wire & cable industry. Precipitated MARTINAL® ATH and MAGNIFIN® MDH are used most commonly in different polymeric backbones for cable compounds. The high purity MARTINAL® and MAGNIFIN® grades are designed for use in plastics and rubber, but can also be used in other applications.

At Soy Technologies, we understand your commitment to sustainable chemistry; we are rather obsessive about it ourselves. Our commitment to bring sustainable soy-based chemistry to the market is exemplified by the Soyanol™ line of functional additives. We have formulated these products to help meet the most pressing needs of formulators today, while maintaining strict regulatory and environmental compliance. Soyanol™ products will help you find solutions to meet the growing challenges presented by increasing scrutiny not only of the VOC content, but also of the hazards presented by additives such as phthalates or APE surfactants. Soyanol™ products utilize high grade refined soy oils as their primary component. Our materials have undergone a rigorous review process at the U.S. EPA and we have qualified the materials under the Design for Environment program. We have also had the materials verified by the USDA BioPreferred program, ensuring that these sustainable solutions meet the most demanding criteria. Products bearing the Soyanol™ trademark meet the following criteria such as no hazardous or toxic materials, no alkyl phenol ethoxylate surfactants, No carcinogens, reproductive toxins, or ozone depleting compounds, use high quality, clear soy esters, non-flammable, no Proposition 65 components, no HAPS, no phthalates or other endocrine disruptors, best available soy chemistry, and grown, processed and packaged in the USA.

Carpenter Co. CARPOL® Polyols are used to make products as rigid as surfboards, as soft as bedding, as resilient as car seats, and as durable as coatings, adhesives, and sealants. Carpenter has added a new line of nonionic surfactants called CARPOL® NIONIC ™. This new product line makes use of their expertise in alkoxylation providing a range of EO/PO block copolymers serving a variety of markets where defoaming, wetting, and emulsifying are critical. The Carpenter Co. Chemical Systems Division operates four high-technology chemical blending facilities, located in Texas, Virginia, Indiana, and the United Kingdom, housing chemical blenders and reactors. These locations produce reliable, ready-to-use polyurethane chemical systems for a wide variety of applications. Carpol® polyurethane rigid foam polyols are available in a wide range of grades and functionalities to serve your formulating needs. No matter if your application is insulation, structural, flotation or something completely unique, Carpenter Co. has a complete range of rigid polyols from which to choose. The same flexible foam polyols that make Carpenter leader in comfort are available to their customers. Let Carpenter Co. help you to make better comfort products. Your move into higher sales and better finished products can come from CARPOL® polyols. Carpol semi-rigid foams are used to make luxurious automobile seats, molded furniture and high-tech instrument panels. The quality and resiliency of these high-performance polyols help customers deliver the “feel” and performance necessary in these applications with stringent product demands. Coatings. Adhesives. Sealants. Elastomers. If you want it to shine, last, stick, in a variety of conditions then your formulations have to be made with Carpol® polyols. With a broad range of products, Carpenter Co, provides you with the tools needed to create finished products that perform in these diverse applications. Carpenter Co. also provides a wide variety of alkoxylates that are used for a broad range of end uses: from defoamers to carrier fluids to lubricants. We have Kosher and Halal certified products along with products meeting various FDA clearances. We also provide a wide variety of surfactant, polyglycols, and alcohol alkoxylates. Carpenter Co. creates polymers to meet the needs of a diverse marketplace.

Micaclad Conductive Silver Flakes (CSM100) is a highly conductive silver mica with a dry bulk resistivity of .002 ohms/cm. These pure silver platelets have the shielding and conductive properties of solid metal silver with a fraction of the cost. The blanketing effect of silver and the reinforcement advantages of the mineral help provide strength and a stable conductive surface.Micaclad Conductive Silver Flakes (CSM100) is a highly conductive silver mica with a dry bulk resistivity of .002 ohms/cm. These pure silver platelets have the shielding and conductive properties of solid metal silver with a fraction of the cost. The blanketing effect of silver and the reinforcement advantages of the mineral help provide strength and a stable conductive surface.

Conductive Silver Spheres (CSGS) are highly conductive, low density, spherical powder and particle with a dry bulk resistivity of .001 ohms/cm. Offering seamless electrical continuity of pure silver at a fraction of the cost and weight.

Methacrylate monomers are used in the production and modification of a wide variety of polymers – such as cast sheet, methacrylate molding compounds, artificial marble or PVC modifiers.

Conductive Silver Spheres (CHS) are highly conductive, low density, spherical powders and particles with a dry bulk resistivity of .001 ohms/cm. Offering seamless electrical continuity of pure silver at a fraction of the cost and weight.

Acronal® is a range water-based emulsions. Acronal® range for exterior paints covers styrene and pure acrylics which offer a very high durability against the influence of weathering. Acronal® range for wood and trim paints offer a very high durability against the influence of weathering. In addition, our styrene acrylics have an outstanding chemical resistance, which is very important for exterior applications. BTC’s range of Acronal® dispersions covers both selfcrosslinking and non selfcrosslinking dispersions. BTC’s range of Acronal® types give decorative foils, filters and wallpaper excellent mechanical properties. In air and oil filters for the automotive industry they improve durability and performance. In high-quality decorative paper foil, our binders ensure a high level of stability of the bonded fibers. To abrasives our binders ensure the abrasives flexibility and reduce abrasive particle wear. BTC’s Acronal® types for natural fibers are acrylic dispersions. BTC’s range of Acronal® types give nonwovens made of synthetic fibers their exceptional and different functional properties.

The Omacide™ range, based on the trusted antifungal IPBC, provides broad compatibility and ease-of-use within a variety of homecare products, offering exceptional activity against yeast and mold growth.

HITOX (high grade titanium dioxide) is a high quality, cost-effective, Beige Colored Titanium Dioxide Pigment produced for use in a broad range of non-white colors. In products which require opacity and color, HITOX can reduce the amount of expensive organic & inorganic pigments as well as white TiO2. HITOX is offered in a 3 different particle sizes from STD (standard) 1.5 microns for medium to low gloss requirements to ULX = 0.8 microns and SF= 0.45 microns for maximum gloss and opacity. HITOX is used in a broad range of Paint and Coatings and Plastics applications including Architectural, Coil Backers, Powder, Container, Wood, Traffic, Paper, Primers, Adhesive & Sealants, Roof Coatings and PVC. HITOX GRAY is well suited for use in Gray Primers, Powder Coating, Decorative and Industrial Paints. In addition to Cost Savings, HITOX GRAY can eliminate or reduce the use of black pigments which are typically difficult to incorporate due to floatation problems. To sum up, HITOX is three things in one product: A Color Pigment• Neutral buff color or gray• Chalk resistant, meeting ASTM D476-84 Type II and Type III• Chemically 95% TiO2 but behaves like a color pigment An Opacifier • High refractive index, good opacifier• Uniform particle size offers consistent tint strength Stable and Safe• Good resistance to acids, alkalis, solvents and chemicals• Does not react with media, resins, or other pigments• Compatible with all resin systems• Non toxic, fiberogenic, carcinogenic, or allergenic• Heavy metal free

A-S-A® is the product we developed as additives for paint, printing inks, plastics, sealant and adhesive. As A-S-A® are classified into the below series by the applications, please grasp each of the characteristics and the actions to select the right one.

Talc is mined on every continent. The best quality Talcs enjoy worldwide markets. These are the only Talcs that CB Chrystal Co. sells. Different grades and qualities provide a variety of properties that are of use by many industries.

Hubercarb is mainly pure calcium carbonate manufactured by hubergroup. There are four series of Hubercarb products available. Hubercarb® Q Series products include ultra-fine, fine, medium-fine and granular particle size calcium carbonates. Several of these products have been surface-modified to enhance end-use performance . Hubercarb® M Series Calcium Carbonate is mined from a uniform deposit of high calcium limestone in Marble Falls, Texas. Products include ultra-fine, fine and medium-fine sizes. Select products have been surface-modified to enhance end-use performance. Hubercarb® W Series Calcium Carbonate has a purity level of 99.3%, is mined from a world-class limestone deposit and processed in Quincy, Illinois. Products include ultra-fine and fine median particle sizes. Two of the W Series grades have been surface-modified to enhance end-use performance. The W Series products are ideal for applications that require high-filler loadings, low moisture content and silica content below detectable levels. The W Series is low in trace metals like iron, which can promote undesirable degradation in some polymer systems. The unique particle shape and particle size distribution lend the W Series products to low viscosity at high-filler loadings, improved surface-finish in molded parts, reduced part shrinkage and part breakage, while saving on expensive equipment repair costs. Hubercarb® G Series Calcium Carbonate is mined from a world-class deposit of high brightness marble in Marble Hill,Georgia. Products include ultra-fine, fine, medium-fine and granular particle sizes. Several of these products have been surface-modified to enhance end-use performance. The G Series products are ideal for applications that require high brightness or pure tints.

Huber’s MoldX® Optimized Alumina Trihydrate (ATH) products eliminate halogens and reduce resin consumption. All MoldX products allow for higher loadings while offering the latest in low viscosity technology thus providing increased flame retardant efficiency at lower formulation costs.

Texicryl® emulsion used to enhance the workability and technical performance of products being supplied into the building and decoration market.A diverse range of thickeners and binders for the Artist Colors market. It can also be used in water-based styrene acrylic emulsion polymers and solid resins specifically developed for graphic art applications, as a rheology modifiers for Hand Cleanser applications.With over 60 years’ experience, our range of PVA / acrylic binders and inverse emulsion thickeners deliver high performance in textile and furnishing products.