Products in Sealants & Caulks

Wayncor™ 211 is an anti-corrosion inhibitive pigment that is very effective in solvent and water based epoxy primers. It does not affect the pot life of 2K systems. It can also be used alone or as a synergist with Zinc Phosphate. Typical use level is between 3 – 7 % total formula weight.

SYLVARES TP 2040 tackifier is a thermoplastic terpene phenolic resin designed for tackifying hot melt adhesives to provide superior adhesion and thermal-stability properties.

SYLVARES 6100 tackifier is a light color, low odor, heat stable aromatic modified terpene resin, which provides an excellent balance of properties when compounded with styrenic block copolymers or ethylene vinyl acetate copolymers.

AltroColor PU 3000 Color Pastes are based on a polyol ether binder and have been developed particularly for the coloring of polyurethane ether systems. As our AltroColor PU 3000 Color Pastes Series are based on a reactive/crosslinkable binder, a full integration into your polyurethane system is ensured. Therefore, the AltroColor Color Pastes have no or only a little influence on the Shore hardness (depending on the type of hardener/variant used) nor on the other mechanical and chemical properties.AltroColor PU 3039 is violet colored.

Only available in Asia! AGITAN P886 is a cost effective and economical powder defoamer specifically designed for broad use in most grout, self-leveling compounds and most other powdered building materials. It combines a cutting edge, unique composition with ease of handling to create additional value to the end user.

Hydroxypropyl MethylCellulose (HPMC) are widely used in construction, pharmaceutical,food, cosmetic, detergent, paints, as thickener, emulsifier, film former, binder, dispersing agent, protective colloids.We can provide the regular grade HPMC, we also can provide modified HPMC according to customer requirements. After modified and surface treatment, we can get the goods which is dispersed in water quickly, lengthen open time, anti-sagging, etc.

Martinal® ON-320 is a 20 micron, ground aluminum hydroxide used as a flame retardant and smoke suppressant, produced in Bergheim, Germany.

CARPOL® PGP-4000 is a propylene glycol initiated polyether polyol. The resulting material has a functionality of two and an average molecular weight of 4000. This diol is polymerized solely with propylene oxide for controlled reactivity. Main applications include C.A.S.E., however, Carpol® PGP-4000 may also be included as a component in other urethane products and formulations.

Kanamoll 650 is a vegetable oil-based light colored secondary plasticizer. ESBO is manufactured from soybean oil through the process of epoxidation. It is been used widely as plasticizer because of high numbers of epoxidized carbon-carbon double bonds. The epoxide group is more reactive due to double bonds, thus making it a good hydrochloric acid scavenger and plasticizer.

Asahi Kasei Tuftec™ H1521 is particularly designed as a modifier to increase flexibility of polypropylene (PP). Its excellent compatibility makes H1521 super-finely dispersed into PP. PP and H1521 blends provides transparent and flexible extruded products such as sheets, films and tubes. The blends are also applicable to injection molding due to its high MFR. It has excellent adhesion, which is suitable for the use of adhesive layer of protective films with hot-melt and pressure sensitive characteristics. H1521 meets USP Class Ⅵ standards. It may be used for medical applications after a special agreement with Asahi Kasei.

Trilene® CP-600 is is an Ethylene-Propylene Liquid Copolymer. Trilene® CP-600 is is is an intermediis ate low moleculis ar weight ethylene-propylene liquid copolymer, ris is andomly polymerized to produce is a liquid elis astomer with is a stis able, sis aturis ated hydrocis arbon bis ackbone. It his as thermis al is is and oxidis ation stis ability under normis al conditions. Trilene® CP-600 cis is an be used is as is a viscosity thickener for is a wide ris is ange of lubricis is ant products providing good sheis ar stis ability is is and low temperis ature chis aris acteristics.

Emulprene 1011 is a hot emulsion styrene-butadiene copolymer using rosin acid as emulsifier and coagulated with salt- acid. It is very light color product stabilized with a non-staining antioxidant.

Emulprene 1011AH is a hot emulsion styrene-butadiene copolymer using rosin acid as emulsifier and coagulated with salt- acid. It is very light color product stabilized with a non-staining antioxidant.

Barvy A Laky Farm Linen P6420 is a thinner for fermage paints and oil-based glazing sealants.

NexSil 20 is an alkaline dispersion of 20 nm colloidal silica at 40% SiO2 concentration in water. The particles are negatively charged and have a high specific surface area. The product can be used in a wide variety of applications such as precision investment casting, precision polishing, metal surface treatment, textile treatment, catalyst binder or other applications where a small particle size colloidal silica is required.

AGITAN 232 has a wide formulation lattitude due to its ease of emulsification. It can be effective in clear coats, highly pigmented systems, low viscosity systems and emulsion manufacturing.

AMBERLAC® 3755-X-80 is a high-solids, vinyl toluene copolymer soya alkyd resin supplied at 80% non-volatile in xylene.

Pulpro PP-10 is a near white calcium carbonate designed for use as a resin filler in pultrusion, caulks, adhesives and sealants and/or in fiberglass spray up manufacturing. R.J. Marshall offers 4 distinct sizes. Pulpro3, a three micron calcium carbonate. Pulpro8, an eight micron calcium carbonate. Pulpro10, a ten micron calcium carbonate and Pulpro20, a twenty micron calcium carbonate product.

LUBA-print® 154/C is a Wax dispersion / Wachsdispersion. It is also used as aqueous paint-systems, to improve slip and mar resistance. aqueous flexo printing inks to improve the rub resistance. Hot melts, to improve antiblocking properties.

Soyanol™ 5000X-HS is viscosity and flow modifier for solvent borne coatings, non-phthalate plasticizer, it is compatible with most conventional resin systems and exempt solvents, provides excellent dispersion characteristics in paints and stains, deep penetration is excellent for wood and concrete applications, it improves leveling, increases open time for better cure rates and smoother finishes and it is more efficient than other options (use less, get more).

AGITAN 307 is recommended for aqueous emulsion systems, specifically for low odor and non-polluting formulations. It is compatible with all common binders.

HN-336 is a halogen–free, medium particle size ATH product that provides low cost flame retardant and smoke suppression in a variety of applications. The particle size distribution is specifically designed for low viscosity, high filler loading levels, and excellent processing characteristics, up to 200°C. HN-336 is recommended for spray-up or hand-lay up FRP applications, filament winding, panel production, resin injection, foam materials, cast polymer and epoxy parts, coatings, adhesives, latex, vinyl and urethane compounds.

NEVCHEM® 120 is a thermoplastic low molecular weight, C9 hydrocarbon resin produced by catalytic polymerization of mixed aromatic and alicyclic monomers derived from petroleum feedstocks.

Zeeospheres Ceramics N-600 is unique dark gray-colored, fine particle size, high-strength microspheres. It is opaque to visible light, but transparent to UV light. The product is typically to reduce VOC levels, increase filler loadings, improve hardness, and add burnish, scrub and abrasion resistance to a variety of coating formulations. It is typically used when color is not important in the applications.

ADD-6212 is a wetting and dispersing additive for solvent-based and solvent-free coatings to improve pigment wetting, reduce the grinding time and stabilize the pigment dispersion. ADD-6212 is suitable for stabilizing inorganic pigments and extenders and strongly reduces mill-base viscosity. ADD-6212 is suitable for coatings and composite.

AGITAN P 823 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN P 823 results in low foaming solutions, specifically aqueous pastes or masses with very low air content. In some mortar systems AGITAN P 823 shows a plastisizing effect, meaning the spreading value is increased. This is ideal for jointless flooring compounds.

AltroColor PU 5000 Color Pastes are based on a hydrocarbon resin and have been developed particularly for the coloring of polyurethane ester and 1-C systems. Although our AltroColor Color Pastes of series PU 5000 are based on a non-reactive binder, a complete integration into your polyurethane system is ensured. Therefore, the AltroColor Color Pastes have no or only a little influence on the Shore hardness (depending on the type of hardener/variant used) nor on the other mechanical and chemical properties.AltroColor PU 5009 is rose colored.

HN-100 is a halogen–free, very coarse particle size alumina trihydrate product that provides low cost flame retardant and smoke suppression in a variety of applications. It can be filled at very high loadings and has excellent processing characteristics, up to 200°C. HN-100 is recommended for rubber goods, compression molded thermosets, adhesives, latex, vinyl and urethane compounds and carpet backings.

AltroColor PU 3000 Color Pastes are based on a polyol ether binder and have been developed particularly for the coloring of polyurethane ether systems. As our AltroColor PU 3000 Color Pastes Series are based on a reactive/crosslinkable binder, a full integration into your polyurethane system is ensured. Therefore, the AltroColor Color Pastes have no or only a little influence on the Shore hardness (depending on the type of hardener/variant used) nor on the other mechanical and chemical properties.AltroColor PU 3032 is oxide red colored.

Polybut EM 0 (NI-15) is a water-based emulsion of low molecular weight polybutene.

A universal workhorse defoamer effective in most adhesives including wood glue, envelope & label, construction, and natural/neoprene formulations. DEE FO 97-3 is also efficient in pigment dispersing and defoaming metallic inks. The defoamer provides excellent persistence in OPV, wood finishes, and a variety of industrial coating formulations as well.

TAFIGEL PUR 82 is designed as an “associative thickener” which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and other paint ingredients. TAFIGEL PUR 82 can be used alone or in combination with other TAFIGEL thickeners, as well as with further thickener technologies. Aqueous gloss paints, thickened with TAFIGEL PUR 82 show minimal pseudoplasticity, similar to the rheology of solvent borne systems. TAFIGEL PUR 82 is recommended for use in following systems: Interior and exterior paints, latex paints, anticorrosive paints, adhesives, and printing inks. TAFIGEL PUR 82 is suitable for indirect food contact applications.

A high efficiency foam control additive designed especially for OPV and most printing inks, such as corrugated, coated paper, packaging, film and foil.

AGITAN DF 6120 is a defoamer for all common emulsion systems. It provides the following properties which controls foaming and aeration during paint manufacture, filling and application, extremely cost effective, good compatibility in a wide range of systems, long lasting efficiency.

NYACOL® NYAGRAPH 351 is a Expandable Graphite Flame Retardant. NYAGRAPH 351 is a natural material based on processed graphite ore. The ore is treated with sulfuric acid in what is called an intercalation process. The material is washed and neutralized to prevent corrosion of metal parts when processed by the user. Excessive shear should be avoided.

SPHERICEL® Hollow Spheres are used to enhance performance and reduce viscosity in paints and coatings and as lightweight additives in plastic parts. They are chemically inert, non-porous, and have very low oil absorption.