Products in Adhesives & Sealants: Plasticizer

Staybelite Ester 5 rosin is the glycerol ester of partially hydrogenated wood rosin, specially processed for superior taste and odor characteristics.

Nayakem NK-250 is versatile monomeric plasticizers. It is primarily known for its exceptional utility as a plasticizer for polyvinyl acetate adhesives. Its compatibility with polyvinyl acetate emulsions allows the tailoring of adhesive systems with excellent wet tack, set time and open times. NK 250 is also efficient plasticizers in acrylic latex caulk formulations. Acrylic latex caulks containing NK 250 are stable with cured caulk showing good adhesion characteristics. NK 250 is high solvating polyvinyl chloride plasticizer displaying utility in plastisols and dry blended vinyl formulations. Its excellent solvating characteristics allow fast, lower temperature processing of vinyl composition and once incorporated, has excellent stain And extraction resistance to aliphatic solvents.

Polybut™ 150 is a low molecular weight conventional polybutene.

Asahi Kasei Tuftec™ H1052 shows moderate adhesion and is good for adhesive layer of protective films by multi-layer extruding process or easy peel films. It is also used as an impact modifier of polypropylene (PP). Its excellent stretch property provides stretch films such as food wrapping film.

Bisomer® LMA97 SP is a hydrophobic methacrylate monomer.

PETOL 28-2LM is a PPG, with a molecular weight of 4000, with low unsaturation, synthesized with double metal cyano complex catalyst. The product is acidified slightly with phosphoric acid.

Polybut™ 6 is a low molecular weight conventional polybutene.

Kanatol 900 (DINP) is almost colorless and odorless oily liquid, free of foreign materials which is slightly soluble in water ( 0.285mg/L at 24C ) but soluble in alcohols, hexane etc. It is miscible and compatible with all the monomeric plasticizers of PVC compounding.

Soyanol™ 1000E is water-based additive for paints or stains, highly compatible with many chemistries, including most latex, acrylic and urethane emulsion systems, it helps develop high stability emulsions, increases open times, improves freeze / thaw performance over industry leading coalescents, also does double duty as coalescent and plasticizer, it is efficient and cost effective solution which has typical usage 2%-7%.

Polybut EM 200(A-50) is a water-based emulsion of low molecular weight polybutene.

Velsiflex® 328 is a blend of dipropylene glycol and diethylene glycol dibenzoate in an approximately equal ratio. Velsiflex 328 is primarily known for its exceptional performance in polyvinyl acetate adhesives. It displays excellent wet tack, set times and open time performance. It also improves adhesion to acrylic latex caulks and is a high-solvating PVC plastisol.

Polybut™ 80 is a low molecular weight conventional polybutene.

Polybut™ 10 is a low molecular weight conventional polybutene.

Nayakem Di Octyl Sebacate (DOS) is the typical high quality cold resistance PVC plasticizers with high plasticizing efficiency and low color distortion. DOS has favorable lubricating action when processing and is often added with phthalate to make cold resisting agricultural film, cable clad, artificial leather, outdoor water tube, and frozen food packaging film and so on. It can also be used in many synthetics rubber where low temperature performance is required and cold resisting plasticizer for Nitro Cellulose, Ethyl Cellulose, Polystyrene, Vinyl Chloride Copolymer and so on.

Mamta Polycoats Acetyl Tributyl Citrate (ATBC) is an efficient and preferred primary plasticizer for sensitive applications. A well-suited and recommended plasticizer not only for medical devices, toys, food packaging, and inks, but also for technical applications such as artificial leathers, textile coatings, floorings, and automotive engineering.

Rit-Chem PIB 4H is polyisobutylene. Possesses low molecular weight. Used in hot melt and solvent-based adhesive and sealant applications.

Springfield Industries SP-612A is an epoxy flexibilizer formulation used toadd flexibility and impact resistance to epoxyadhesives and coatings. It is bisphenol A epoxy basedwith a polysulfide flexibilizing component andproduces a transparent coating when used with anappropriate curing agent.

Kolon Industries HIKOREZ® LP-5100 is a pale yellow low molecular liquid resin obtained from the polymerization of C5 aliphatic olefin and diolefin generated in the thermal-cracking process of naphtha. This product is specialized for improving the adhesive strength of pressure sensitive adhesive (PSA), and also can be used as a plasticizer. .

Winlex 4025 is a low softening point rosin ester with good stability and mild odor. It is easily emulsified in water by conventional means. The principal uses for this resin are in the formulation of oil varnish, lacquer, hot-melt, heat-sealing, and pressure-sensitive adhesives. It has a suitable FDA status for use in food packaging applications covered by 175.105.

Kanatol 3430 (E) is almost colorless and odorless oily liquid, free of foreign materials which is in soluble in water but soluble in alcohols, hexane etc. It is miscible and compatible with all the monomeric plasticizers of PVC compounding.

Soyanol™ 5000X-HS is viscosity and flow modifier for solvent borne coatings, non-phthalate plasticizer, it is compatible with most conventional resin systems and exempt solvents, provides excellent dispersion characteristics in paints and stains, deep penetration is excellent for wood and concrete applications, it improves leveling, increases open time for better cure rates and smoother finishes and it is more efficient than other options (use less, get more).

Polybut™ 28 is a low molecular weight conventional polybutene.

EPOXOL® EP159 is a Bio-Base Plasticizer and Ultra Low VOC coalescent. It exhibits good compatibility with a variety of chemistries, is non-fugitive, and Ultra Low VOC’s. Epoxol®EP159 is an excellent, non-hazardous alternative to phthalate, benzoate, and citrate-ester plasticizers applications including paints and coatings, caulks, sealants, and adhesives. It shows good stability, and block resistance / dirt pick-up. Epoxol®EP159 has a high Bio-Based content and is an excellent choice for renewable formulations and low VOC systems.

STYSOLAC AW is a unique non-migrating, nonvolatile, non-hydroscopic resin plasticizer for use in both solvent and water base ink and coatings applications. An effective plasticizer for (water-based) alkalized polyner resinates and more polar resin dispersions, as well as for the more alcohol soluble type resin solutions.

Dioctylphthalate is a clear liquid, with a characteristic odor. It is a flammable product, with air forming explosive mixtures within 0.1-0.2% vol. limits. The product is stable under normal storage and usage conditions, in tightly sealed containers.

Polybut 200 is a low molecular Weight Conventional Polybutene

Mamta Polycoats Acetyl Tri(2-Ethylhexyl) Citrate (ATEHC) is an outstanding plasticizer for technical applications, especially where no or minimum fogging characteristics and lowest migration behavior are needed. Excellent compatibility with PVC makes it a well-suited and recommended plasticizer for cables, artificial leathers, textile coatings, floorings, car interiors, and many other industrial applications.

Polybut EM 0 (NI-15) is a water-based emulsion of low molecular weight polybutene.

Kanatol 1001 (DIDP) is a clear, colorless, and odorless liquid, free of foreign materials. It is soluble in most organic solvent and in soluble in water. Around 95% of DIDP is used in PVC as a plasticizer. More than half of the remaining 5% is used in the production of polymers other than PVC (e.g. rubbers). The remaining DIDP used in non-polymer application including anticorrosion paints, anti-fouling paints, lacquers, inks, adhesives and sealants.

Glyplast 206/8 NL are low molecular weight polymers that incorporated into a polymeric matrix offer outstanding properties such as migration and extraction resistance, weather stability, high temperature performance, high mechanical properties, negligible toxicity and good environmental compatibility. Due to these remarkable properties, polymeric plasticizers are generally adapted to undergo the stricter legislation norm for Food Contact Materials (EU and FDA)

Glyplast 206/6 NL are low molecular weight polymers that incorporated into a polymeric matrix offer outstanding properties such as migration and extraction resistance, weather stability, high temperature performance, high mechanical properties, negligible toxicity and good environmental compatibility. Due to these remarkable properties, polymeric plasticizers are generally adapted to undergo the stricter legislation norm for Food Contact Materials (EU and FDA)

DRT Abalyn methyl ester of wood rosin is an amber-colored, near neutral, tacky, viscous liquid.

Winlex 4270 is a liquid rosin ester. It is designed for applications requiring low odor and high tack. It has a suitable FDA status for use in food packaging applications covered by 175.105.

Hercolyn D resin, a methyl ester of hydrogenated rosin, is a light amber liquid resinous tackifier and plasticizer. Being hydrogenated, it has marked resistance to aging.

Girnar Industries Blown Castor Oil is a honey-golden vicious liquid derived after oxidative polymerization and due to this fact, it is also known as oxidized castor oil or polymerized castor oil. It is prepared by blowing air or oxygen into castor oil at various temperatures of 80-1300C.

Kanatol 400 (N) (DnBP) is almost colorless, odorless or slight aromatic, ester odor oily liquid, free of foreign materials. Plasticization of vinyl resins and other kinds of polymers in production of cable flexible PVC, artificial leather, rubber products, polymeric building materials, linoleum, film and sheet /plate materials, packing films, PVC gaskets etc.