Products in Packaging & Paper: Rosins

Flytac 120 - 90W is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

Flytac 104 - F is a pale, thermoplastic, acidic resin produced by fully hydrogenating the rosin. Because of this treatment, it is highly resistant to oxidation, discoloration, and changes in solubility characteristics when exposed to air and sunlight.

Flytac 104 - P is a pale, thermoplastic, acidic resin produced by partially hydrogenating the rosin. Because of this treatment, it is highly resistant to oxidation, discoloration, and changes in solubility characteristics when exposed to air and sunlight.

Flytac 105 - F is a glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot melt, pressure-sensitive, laminating adhesives, and wax depilatories. In general, it finds use where there is a need for a pale, non-oxidizing, color-stable, and highly tacky liquid resin.

Flytac 105 - P is a glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot melt, pressure-sensitive, laminating adhesives, and wax depilatories. In general, it finds use where there is a need for a pale, non-oxidizing, color-stable, and highly tacky liquid resin.

Flytac 111 - 301 is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree with eliminated foreign matter and coloring radicals. It is one of the palest, most highly stabilized rosins commercially available. This product is especially indicated as the tackifier in solvent adhesives and hot-melt applied coatings and adhesives that must excel in these properties.

Flytac 120 is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

Flytac 111 - 101 is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree with eliminated foreign matter and coloring radicals. It is one of the palest, most highly stabilized rosins commercially available. This product is especially indicated as the tackifier in solvent adhesives and hot-melt applied coatings and adhesives that must excel in these properties.

Teckros® R100 is a light- colored, stabilized pentaerythritol ester of gum rosin used in a wide range of hot melt, pressure sensitive, other adhesives, and many other applications where rosin ester performance and pleasant odor are important. Unlike tall oil-derived rosin esters, Teckros® R100 is free from meaningful sulfur content resulting in low odor of a pleasant character.

SYLVALITE RE 100L rosin ester is a stabilized pentaerythritol ester of Tall Oil Rosin. SYLVALITE RE 100L exhibits low color and good color stability. This resin is compatible with a broad range of polymers, which enables formulation flexibility in various hot melt and solvent based adhesive applications.

West Tech Chemical Ltd WT 820 is an aqueous, solvent free, anionic rosin ester dispersion recommended as a tackifier for acrylic latex polymers used in label, tape, and construction applications. The use of resin dispersion enhances specific adhesion to polyolefin substrates and recycled corrugated board.

Foreverest Resources Colorless Pentaerythritol Hydrogenated Rosinate PEHR100D is a kind of super light color tackifying polyols resin, which is esterified from refined gum rosin by pentaerythritol, and through series combined technologies units of catalytic hydrogenation. With benefit of light color, low odor, good heat stability and excellent aging resistance, CPEHR is mainly used in screen protection film, medicinal patch, diaper adhesive, PSA and HMA.

West Tech Chemical Ltd WR 1095 is glycerol ester of gum rosin. This product has high viscosity, superior aging resistance, and excellent compatibility.

SYLVALITE RE 85GB rosin ester is an ester of stabilized Tall Oil Rosin. This light colored product has been formulated to provide excellent heat and aging stability. When compounded in Ethylene Vinyl Acetate (EVA) hot melt adhesives, it provides excellent color stability when compared with other tackifiers of its type.

SYLVALITE RE 88F rosin ester is a very light and stable glycerol ester with a medium softening point. This resin is compatible with a broad range of polymers, which enables formulation flexibility in various hot melt and solvent based adhesive applications. This rosin ester is especially suitable for pressure sensitive adhesive tapes and labels application. The low Tg of SYLVALITE RE 88F rosin ester provides enhanced performance at lower temperatures.

SYLVALITE RE 110L rosin ester is a light-colored, high softening point, pentaerythritol ester of tall oil rosin, which has been formulated to provide excellent heat and aging stability. When compounded in Ethylene Vinyl Acetate (EVA) hot melt adhesives it provides excellent color stability when compared with other tackifiers of its type.

V-TAC™ 9001 dispersion is an aqueous, 55% solids, solvent-free anionic rosin based dispersion compatible with the following latexes: acrylic, styrene-butadiene rubber, natural rubber and polychloroprene. V-TAC™ 9001 enhances adhesion as well as superior heat resistance. V-TAC™ 9001 is recommended as a tackifier for pressure sensitive and contact-bond adhesives.

Guangxi Zhongchang Resin RL10 Liquid Rosin Ester is a liquid rosin ester tackifier designed for applications requiring low odor and excellent stability. Soluble in esters, petroleum benzine, mineral spirit, benzene, ethyl acetate, acetone aliphatic and chlorinated solvents.

Aquadhes® 6102 is a a water-based rosin ester dispersion and solvent free.

Foreverest Resources Colorless Glyceryl Hydrogenated Rosinate GEHR100D is a kind of super light color tackifying polyols resin, which is esterified from refined hydrogenated rosin and edible glycerol, and through series combined technologies units of catalytic hydrogenation. With benefits of light color, low odor, good heat stability and excellent aging resistance, CGEHR is mainly used in screen protection film, medicinal patch, diaper adhesive, PSA and HMA.

SYLVATAC RE 85 rosin ester is a stabilized glycerol ester of Tall Oil Rosin. The thermal stability and polymer compatibility of this resin make it useful in a wide variety of adhesives. The low Tg of SYLVATAC RE 85 rosin ester enables adhesive performance at lower temperatures.

elliottii GUM ROSIN 08EE is a natural Gum Rosin obtained by steam distilillation of the Pinus elliottii vr elliottii crude gum.

SYLVALITE RE 80HP rosin ester is a low odor, light-colored ester of Tall Oil Rosin that has been stabilized to provide excellent performance and aging properties. The stability and polymer compatibility of this tackifier make it useful in a wide variety of adhesives, especially PSAs.

SYLVATAC RE 12 liquid rosin ester has broad compatibility with polymer used in flooring and construction applications. With optimized mixture of resins and plasticizers, SYLVATAC RE 12 can be used as a self-emulsifying blend for water-based acrylic polymers.

Super Ester W-100 is characterized by its lighter color, excellent heat stability, widely ranged solubility and compatibility, and well-balanced adhesion properties for use in formulation of hot melt and pressure-sensitive adhesive.

PT. NASCO GLYCEROL ESTER OF GUM ROSIN 85 is a pale thermoplastic resin made of gum rosin and glycerol / glycerine. It is perfectly soluble in various types of polymers. It exhibits excellent adhesiveness, as a result of which it is widely used to manufacture various adhesives, and primarily as a tackifier in hot melt adhesives (HMA). It has little odor and is light in color.

West Tech Chemical Ltd WR 5095 is glycerol ester of gum rosin. This product has high viscosity, superior aging resistance, and excellent compatibility.

SYLVALITE RE 10L rosin ester is a low softening point ester of tall oil rosin with good stability and mild odor. This liquid tackifier has wide compatibility, allowing it to be used in many adhesive systems, particularly where better wetting or low temperature tack is required.

Aquadhes® 6001 is a a water-based rosin ester dispersion and solvent free.

SYLVALITE RE 100S rosin ester is a stabilized pentaerythritol ester of Tall Oil Rosin. SYLVALITE RE 1005 exhibits low color and good color stability. This resin is compatible with a broad range of polymers, which enables formulation flexibility in various hot melt and solvent based adhesive applications.

West Tech Chemical Ltd WR 3095 is glycerol ester of gum rosin. This product has high viscosity, superior aging resistance, and excellent compatibility.

special GUM ROSIN 04SEE is a natural Gum Rosin obtained by steam distilillation of the Pinus elliottii vr elliottii crude gum.

West Tech Chemical Ltd AT 820 is an aqueous, solvent free, anionic rosin ester dispersion recommended as a tackifier for acrylic latex polymers used in label, tape, and construction applications. The use of resin dispersion enhances specific adhesion to polyolefin substrates and recycled corrugated board.

special GUM ROSIN 24AEE is a natural Gum Rosin obtained by steam distilillation of the Pinus elliottii vr elliottii crude gum.

Staybelite Ester 10 is the glycerol ester of partially hydrogenated wood rosin.

elliottii GUM ROSIN 24EE is a natural Gum Rosin obtained by steam distilillation of the Pinus elliottii vr elliottii crude gum.