Products in Packaging & Paper: Ethylene Vinyl Acetate (EVA)

Irgafos® 168 FF is a hydrolytically stable organo-phosphite processing stabilizer, offering key features and benefits such as low volatility, resistance to hydrolysis, and protection for polymers prone to oxidation during processing. It effectively prevents discoloration and is presented as a white, free-flowing powder. Irgafos 168 FF is highly recommended for various applications, including powder coatings, solvent-based coatings, hot-melt adhesives, sealant systems, wood flooring adhesives, and roof coatings.

Flytac 120 - 100W is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

Flytac 120 - 90W is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

AEROSIL® R 972 is hydrophobic fumed silica grade treated with DDS (Dichlordimethylsilane). The moderate hydrophobicity of these AEROSIL® products is suited for defoaming properties in the presence of appropriate hydrophobic liquids. They are recomended for improving the sedimentation stability of defoamer dispersions as well.

Flytac 102 - 100 is a slightly yellow, transparent solid made from gum rosin through esterification with pentaerythritol. This product has a high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility, etc. Typical Uses EVA base hot melt glue sticks Bookbinding Pressure-sensitive adhesive based on SIS or SBS adhesive Emulsion and paints based on NR and CR

Flytac 102 - 100F is a slightly yellow, transparent solid made from gum rosin through esterification with pentaerythritol. This product has a high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility, etc. Typical Uses EVA base hot melt glue sticks Bookbinding Pressure-sensitive adhesive based on SIS or SBS adhesive Emulsion and paints based on NR and CR

Flytac 120 is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

Flytac 102 is a slightly yellow, transparent solid made from gum rosin through esterification with pentaerythritol. This product has a high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility, etc. Typical Uses EVA base hot melt glue sticks Bookbinding Pressure-sensitive adhesive based on SIS or SBS adhesive Emulsion and paints based on NR and CR

PMB200OGGP are photochromic in pellet form. They reversibly change color with exposure to sunlight or UV radiation in the range of 300 to 360nm. They are colorless in their un-reacted state.

Teckrez® C95-99L is an aromatic (C9) based resins with aliphatic (C5) modification to provide cost effective performance in EVA hot melts and other applications.

PMB200RGP are photochromic in pellet form. They reversibly change color with exposure to sunlight or UV radiation in the range of 300 to 360nm. They are colorless in their un-reacted state.

Teckrez® C95-109L is an aromatic (C9) tackifier resin, aliphatic (C5) modified with improved color and odor. C5 modification provides improved EVA (Ethylene Vinyl Acetate) compatibility making Teckrez® C95-109L an effective tackifier in EVA hot melt adhesives. It is also very effective with SBS block polymers, SBR,and other polymers with aromatic content.

PUREsorb 944 is a high molecular weight hindered amine light stabilizer (HALS). It shows excellent compatibility, high resistance to extraction and low volatility.

Teckrez® HM-1000 is a Styrenated Hydrogenated hydrocarbon resin used where water-white color, excellent heat stability, narrow molecular weight distribution and a degree of polarity are beneficial. HM-1000 enables formulation of premium EVA and mPE-based hot melt adhesives providing better specific adhesion when compared to standard hydrogenated hydrocarbon resins. Other applications include hot melt PSA's, premium aerosol adhesives, elastomeric sealants, wax compounding, medical adhesives, and others.

PMB200PGP are photochromic in pellet form. They reversibly change color with exposure to sunlight or UV radiation in the range of 300 to 360nm. They are colorless in their un-reacted state.

PMB200BGP are photochromic in pellet form. They reversibly change color with exposure to sunlight or UV radiation in the range of 300 to 360nm. They are colorless in their un-reacted state.

PMB200MGP are photochromic in pellet form. They reversibly change color with exposure to sunlight or UV radiation in the range of 300 to 360nm. They are colorless in their un-reacted state.

PMB200YGP are photochromic in pellet form. They reversibly change color with exposure to sunlight or UV radiation in the range of 300 to 360nm. They are colorless in their un-reacted state.

PUREsorb 783 is a synergistic blend of PUREsorb 622 and PUREsorb 944. It is a versatile light stabilizer with good extraction resistance, low gas fading and low pigment interaction. PUREsorb 783 is well suited for LDPE, LLDPE, HDPE films, tapes and thick sections and for PP films. PUREsorb 783 is also the product of choice for thick sections where indirect food contact approval is required.

Teckros® R100 is a light- colored, stabilized pentaerythritol ester of gum rosin used in a wide range of hot melt, pressure sensitive, other adhesives, and many other applications where rosin ester performance and pleasant odor are important. Unlike tall oil-derived rosin esters, Teckros® R100 is free from meaningful sulfur content resulting in low odor of a pleasant character.

FloraRez® 785 is a glycerol ester derived from highly hydrogenated gum rosin. This thermoplastic resin exhibits a very pale color and demonstrates remarkable resistance to oxidation and color degradation. It serves as a valuable tackifying resin component in diverse applications such as adhesives, inks, coatings, and personal care formulations, particularly in scenarios where oxidative stability is essential.

PMB200OGP are photochromic in pellet form. They reversibly change color with exposure to sunlight or UV radiation in the range of 300 to 360nm. They are colorless in their un-reacted state.

FloraRez® G85 is the glycerol ester of gum rosin, which is also known as ester gum. It is a pale-colored thermoplastic resin that has a low odor and low acid number. FloraRez® G85 is commonly used as a resin component in various adhesives, inks, coatings, and personal care compositions.

HIGREE™ HB1310 is a light colored premium aromatic modified aliphatic hydrocarbon resin with a narrow molecular weight distribution. It is primarily designed tackification of styrene-isoprene-styrene(SIS)block copolymers, but also has utility in natural rubber, polyisobutylene, butyl rubber, EVA, APP and APAP. It is suggested as tackifying resin for high quality hotmelt and hotmelt pressure sensitive adhesives.

West Tech Chemical Ltd WR 1095 is glycerol ester of gum rosin. This product has high viscosity, superior aging resistance, and excellent compatibility.

Megawide Petrochemicals C5 Hydrocarbon Resin MA 95 is specially suitable for hot melt pressure sensitive adhesive (such as all kinds of packing tape, labels, double-sided adhesive tape, protection tape, hygiene supplies, etc.), hot melt adhesive (such as express plastic packaging, book binding glue, glue wood processing, a variety of stick, etc.).

Puyang United Chemical C5 Petroleum Resin UCA100 hydrocarbon resin is an aliphatic tackifier resins with an excellent compatibility with SIS, SIBS, and SBS block copolymers, EVA copolymers and nature rubber.

LESTAC TR100 is terprene resin, also known as polyterprene resin,a pale yellow granular thermoplastic resin obtained from mainly terprene feedstocks either from wood sources or from citrus fruits, by the use of turpentine and α pinene and β pinene, in the role of aluminum trichloride catalyst. The major usages are tackifier for pressure sensitive adhesive, because of its well balanced PSA properties such as tackness, adhesive strength and cohesive strength. This grade also can be use as the binder for rubber compound, tire, etc.

Foreverest Resources Liquid Terpene Resin 31393 is polymerized by gum turpentine, which is a kind of excellent tackifier, with the characteristics including strong cohesive force, good aging resistance, heat resistance, radiation-proof, acid resistance, alkali resistance, odorless, nontoxic and excellent dielectric properties. It is designed to improve the initial viscosity of pressure sensitive tapes, and provide excellent compatibility and solubility in a wide range of applications which widely used for Pressure Sensitive Tapes, rubber, adhesive, hot melting coating, lacquer, superior printing ink, packing, anti-rust oil and chewing gum, etc.

Aquadhes® 6102 is a a water-based rosin ester dispersion and solvent free.

Bitoner Resin C-2145 include C5 modified C9 resin and C9 modified C5 resin.

Super Ester W-100 is characterized by its lighter color, excellent heat stability, widely ranged solubility and compatibility, and well-balanced adhesion properties for use in formulation of hot melt and pressure-sensitive adhesive.

SCG Chemicals LP1060P is a refined polyethylene homopolymer wax derived from the unique HDPE process by Thai Polyethylene Co., Ltd., a subsidiary of SCG Chemicals Co., Ltd. Under the operational excellent along with the high technology (close loop refinery), LPIO6OP is guaranteed its high quality for various applications.

Fushun Huaxing Petroleum Chemical HX-1690A is C5 aliphatic hydrocarbon resin based on purified piperylene. HX1690A hydrocarbon resin is a low molecular weight, light color thermoplastic resin produced from aliphatic petroleum-derived monomers.It owns good balance of tack and cohesive properties ,excellent heat stability and wild compatibility.This grade is especially for EVA hot melt adhesive and SIS, SBS based pressure sensitive adhesive.

PT. NASCO GLYCEROL ESTER OF GUM ROSIN 85 is a pale thermoplastic resin made of gum rosin and glycerol / glycerine. It is perfectly soluble in various types of polymers. It exhibits excellent adhesiveness, as a result of which it is widely used to manufacture various adhesives, and primarily as a tackifier in hot melt adhesives (HMA). It has little odor and is light in color.

West Tech Chemical Ltd WR 5095 is glycerol ester of gum rosin. This product has high viscosity, superior aging resistance, and excellent compatibility.