Products in Chassis & Brake: Cables

30 Products found in Chassis & Brake

Fast Response TimesFast Response Times

SDSWith SDS

TDSWith TDS

AEROSIL® R 972 banner

EvonikAEROSIL® R 972

INCI Name:Silica Dimethyl Silylate
Chemical Name:Silica gel, pptd., cryst.-free, Silica Dimethyl Silylate
Functions:Viscosity Modifier, Thickener, Processing Aid, Rheology Modifier
CAS Number:112926-00-8
Chemical Family:Silica

AEROSIL® R 972 is hydrophobic fumed silica grade treated with DDS (Dichlordimethylsilane). The moderate hydrophobicity of these AEROSIL® products is suited for defoaming properties in the presence of appropriate hydrophobic liquids. They are recomended for improving the sedimentation stability of defoamer dispersions as well.

AEROSIL® 200 banner

EvonikAEROSIL® 200

INCI Name:Silica
Chemical Name:Silica gel, pptd., cryst.-free, Pyrogenic Silica
Functions:Viscosity Modifier, Anti-Settling Agent, Thickener, Rheology Modifier
CAS Number:112926-00-8
Chemical Family:Silica

AEROSIL® 200 is a hydrophilic fumed silica with a specific surface area of 200 m²/g.

Arnitel® CM622 banner

EnvaliorArnitel® CM622

Polymer Name:Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods:Extrusion, Injection Molding
End Uses:Pump Parts, Tubing, Cables, Truck Air Brake Tubes, Wires
Density:1270.0 - 1270.0 kg/m³
Strain at Break:640.0 - 640.0 %
Flexural Modulus:270.0 - 270.0 MPa

Arnitel® CM622, a high-performance thermoplastic copolyester (TPC) renowned for its exceptional blend of flexibility, high-temperature resistance, strength, and outstanding processing attributes. In industries spanning automotive to E&E, it serves as a lighter, more intelligent, and eco-friendly replacement for traditional rubbers, effectively lowering environmental impact and system costs. Processed through extrusion and injection molding techniques, it features a hardness of 60 Shore D, primarily ideal for extrusion applications.

SIBUR Acrylonitrile-butadiene rubber NBR 1845 plywood container 1,26 banner

SIBURSIBUR Acrylonitrile-butadiene rubber NBR 1845 plywood container 1,26

Polymer Name:Acrylonitrile Butadiene Rubber (NBR)
End Uses:Hoses, Synthetic Leather, Cables, Gaskets, Footwear, Belts & Belt Repair, Roofing Membranes
Features:Frost Resistant, Oil Resistant

NBR 1845 is essentially an acrylonitrile (17-20%) and 1,3-butadiene copolymer obtained by emulsion polymerization method with the use of fatty acid soaps as emulsifier in accordance with the ecologically clean technology. Low content of acrylonitrile, good frost-resistance, satisfactory oil resistance.

SIBUR Acrylonitrile-butadiene rubber NBR 1855 plywood container 1,26 banner

SIBURSIBUR Acrylonitrile-butadiene rubber NBR 1855 plywood container 1,26

Polymer Name:Acrylonitrile Butadiene Rubber (NBR)
End Uses:Belts & Belt Repair, Roofing Membranes, Conveyor Parts, Valve Parts, Valves, Hoses, Synthetic Leather, Cables, Gaskets, Footwear
Features:Oil Resistant, Frost Resistant

NBR 1855 is essentially an acrylonitrile (17-20%) and 1,3-butadiene copolymer obtained by emulsion polymerization method with the use of fatty acid soaps as emulsifier in accordance with the ecologically clean technology. Low content of acrylonitrile, good frost-resistance, satisfactory oil resistance.

Miracll Chemicals E 70 banner

Miracll ChemicalsMiracll Chemicals E 70

Polymer Name:Thermoplastic Polyurethane (unspecified)
Processing Methods:Compounding
End Uses:Fuel Pipes, Automotive Components, Bellows, Seats, Hoses, Cables, Wires, Gaskets, Tubes

Miracll Chemicals E 70 is a polyester-based thermoplastic polyurethane used for wide variety of applications.

STARCOM S/2000 banner

Eurocompound PolymersSTARCOM S/2000

Polymer Name:Polyvinyl Chloride (PVC)
Processing Methods:Extrusion, Injection Molding
End Uses:Telecommunications, Cables, Automotive Exterior Parts, Wires, Furniture, Consumer Applications, Electrical Parts, Automotive Interior Parts

STARCOM S/2000 is a PVC grade product.

Royalene® 539 banner

Lion ElastomersRoyalene® 539

Polymer Name:Ethylene Propylene Diene Terpolymer (EPDM)

A High Ethylene, High Mooney Polymer for TPO Products and Extruded Mechanical Goods

TPO - ELASTRON T401.D51.B banner

ElastronTPO - ELASTRON T401.D51.B

Polymer Name:Thermoplastic Polyolefin (TPO)
Processing Methods:Injection Molding
Features:High Hardness
Density:900.0 - 900.0 kg/m³
Strain at Break:500.0 - 500.0 %

A hard, black thermoplastic polyolefin elastomer (TPO) material belongs to thermoplastic elastomer (TPE) family designed for general purpose applications.

TPO - ELASTRON T400.A70.N banner

ElastronTPO - ELASTRON T400.A70.N

Polymer Name:Thermoplastic Polyolefin (TPO)
Processing Methods:Injection Molding
Features:Soft, Good Colorability
Density:900.0 - 900.0 kg/m³
Strain at Break:450.0 - 450.0 %

A soft, colorable thermoplastic polyolefin elastomer (TPO) material belongs to thermoplastic elastomer (TPE) family designed for general purpose applications.

TPO - ELASTRON T401.D51.N banner

ElastronTPO - ELASTRON T401.D51.N

Polymer Name:Thermoplastic Polyolefin (TPO)
Processing Methods:Injection Molding
Features:High Hardness, Good Colorability
Density:900.0 - 900.0 kg/m³
Strain at Break:500.0 - 500.0 %

A hard, colorable thermoplastic polyolefin elastomer (TPO) material belongs to thermoplastic elastomer (TPE) family designed for general purpose applications.

TPO - ELASTRON T401.D32.N banner

ElastronTPO - ELASTRON T401.D32.N

Polymer Name:Thermoplastic Polyolefin (TPO)
Processing Methods:Injection Molding
Features:High Hardness, Good Colorability
Density:910.0 - 910.0 kg/m³
Strain at Break:400.0 - 400.0 %

A hard, colorable thermoplastic polyolefin elastomer (TPO) material belongs to thermoplastic elastomer (TPE) family designed for general purpose applications.

TPO - ELASTRON T100.D60.N banner

ElastronTPO - ELASTRON T100.D60.N

Polymer Name:Thermoplastic Polyolefin (TPO)
Processing Methods:Injection Molding
Features:High Hardness, Good Colorability
Density:980.0 - 980.0 kg/m³
Strain at Break:250.0 - 250.0 %

A hard, colorable thermoplastic polyolefin elastomer (TPO) material belongs to thermoplastic elastomer (TPE) family designed for general purpose applications.

TPO - ELASTRON T100.D43.N banner

ElastronTPO - ELASTRON T100.D43.N

Polymer Name:Thermoplastic Polyolefin (TPO)
Processing Methods:Injection Molding
Features:High Hardness, Good Colorability
Density:980.0 - 980.0 kg/m³
Strain at Break:500.0 - 500.0 %

A hard, colorable thermoplastic polyolefin elastomer (TPO) material belongs to thermoplastic elastomer (TPE) family designed for general purpose applications.

Miracll Chemicals E 85 banner

Miracll ChemicalsMiracll Chemicals E 85

Polymer Name:Thermoplastic Polyurethane (unspecified)
Processing Methods:Compounding
End Uses:Fuel Pipes, Automotive Components, Bellows, Seats, Hoses, Cables, Wires, Gaskets, Tubes

Miracll Chemicals E 85 is a polyester-based thermoplastic polyurethane used for wide variety of applications.

Miracll Chemicals E 95 banner

Miracll ChemicalsMiracll Chemicals E 95

Polymer Name:Thermoplastic Polyurethane (unspecified)
Processing Methods:Compounding
End Uses:Fuel Pipes, Automotive Components, Bellows, Seats, Hoses, Cables, Wires, Gaskets, Tubes

Miracll Chemicals E 95 is a polyester-based thermoplastic polyurethane used for wide variety of applications.

TPO - ELASTRON T100.D60.B banner

ElastronTPO - ELASTRON T100.D60.B

Polymer Name:Thermoplastic Polyolefin (TPO)
Processing Methods:Injection Molding
Features:High Hardness
Density:980.0 - 980.0 kg/m³
Strain at Break:250.0 - 250.0 %

A hard, black thermoplastic polyolefin elastomer (TPO) material belongs to thermoplastic elastomer (TPE) family designed for general purpose applications.

Royalene® 510 banner

Lion ElastomersRoyalene® 510

Polymer Name:Ethylene Propylene Diene Terpolymer (EPDM)
Processing Methods:Extrusion, Profile Extrusion, Compression Molding

A High Ethylene Polymer with Good Green Strength for Wire and Cable and Extruded Profiles

TPO - ELASTRON T400.A70.B banner

ElastronTPO - ELASTRON T400.A70.B

Polymer Name:Thermoplastic Polyolefin (TPO)
Processing Methods:Injection Molding
Features:High Hardness
Density:900.0 - 900.0 kg/m³
Strain at Break:450.0 - 450.0 %

A soft, black thermoplastic polyolefin elastomer (TPO) material belongs to thermoplastic elastomer (TPE) family designed for general purpose applications.

TPO - ELASTRON T401.D32.B banner

ElastronTPO - ELASTRON T401.D32.B

Polymer Name:Thermoplastic Polyolefin (TPO)
Processing Methods:Injection Molding
Features:High Hardness
Density:910.0 - 910.0 kg/m³
Strain at Break:400.0 - 400.0 %

A hard, black thermoplastic polyolefin elastomer (TPO) material belongs to thermoplastic elastomer (TPE) family designed for general purpose applications.

TPO - ELASTRON T400.D55.B banner

ElastronTPO - ELASTRON T400.D55.B

Polymer Name:Thermoplastic Polyolefin (TPO)
Processing Methods:Injection Molding
Features:Soft, Good Colorability
Density:900.0 - 900.0 kg/m³
Strain at Break:400.0 - 400.0 %

A hard, black thermoplastic polyolefin elastomer (TPO) material belongs to thermoplastic elastomer (TPE) family designed for general purpose applications.

TPO - ELASTRON T100.D43.B banner

ElastronTPO - ELASTRON T100.D43.B

Polymer Name:Thermoplastic Polyolefin (TPO)
Processing Methods:Injection Molding
Features:High Hardness
Density:980.0 - 980.0 kg/m³
Strain at Break:500.0 - 500.0 %

A hard, black thermoplastic polyolefin elastomer (TPO) material belongs to thermoplastic elastomer (TPE) family designed for general purpose applications.

Kemai Chemical ACCELERATOR CZ (CBS) banner

Kemai ChemicalKemai Chemical ACCELERATOR CZ (CBS)

Functions:Accelerator
Chemical Family:Amides

Kemai Chemical ACCELERATOR CZ (CBS) is an after-effect accelerator. It has high performance of scorching resistance and short curing time. It mainly used for making tire, rubber tubes, shoes, tapes and cables.

STARCOM S/1000 banner

Eurocompound PolymersSTARCOM S/1000

Polymer Name:Polyvinyl Chloride (PVC)
Processing Methods:Extrusion, Injection Molding
End Uses:Footwear, Cables, Wires, Automotive Fuel Structural Components, Outdoor Furnishings, Automotive Interior Parts

STARCOM S/1000 is a PVC grade product.

Apcoflex N684 banner

Apcotex Industries LimitedApcoflex N684

Polymer Name:Acrylonitrile Butadiene Rubber (NBR)
Processing Methods:Extrusion, Injection Molding, Compression Molding
End Uses:Tubing, Cables, Footwear, Wires, Bellows
Features:Cold Polymerized, Medium Viscosity, High Flow
Synonyms:1,3-Butadiene-acrylonitrile copolymer, 1,3-Butadiene-acrylonitrile polymer, Acrylonitrile-1,3-butadiene copolymer, Acrylonitrile-1,3-butadiene polymer, Acrylonitrile-butadiene copolymer, Acrylonitrile-butadiene polymer, Acrylonitrile-butadiene resin, Butadiene-acrylonitrile copolymer, Butadiene-acrylonitrile polymer, Poly(acrylonitrile-butadiene), Poly(butadiene-acrylonitrile)

Apcoflex® N684 is a cold polymerized, medium ACN containing acrylonitrile butadiene co-polymer. It contains non-staining antioxidant.

TPO - ELASTRON T400.D55.N banner

ElastronTPO - ELASTRON T400.D55.N

Polymer Name:Thermoplastic Polyolefin (TPO)
Processing Methods:Injection Molding
Features:Soft, Good Colorability
Density:900.0 - 900.0 kg/m³
Strain at Break:400.0 - 400.0 %

A hard, colorable thermoplastic polyolefin elastomer (TPO) material belongs to thermoplastic elastomer (TPE) family designed for general purpose applications.

Henan Kailun Chemical 6PPD(4020) banner

Henan Kailun ChemicalHenan Kailun Chemical 6PPD(4020)

Functions:Primary Antioxidant, Antioxidant
Chemical Family:Diamines, Amines
Compatible Polymers & Resins:Natural Rubbers (NR)
End Uses:Engine Mounts, Hoses, Cables, Tires, Bushings

Henan Kailun Chemical 6PPD(4020) is Dark brown to dark violet pastilles having relative density of 0.986-1.00. It is Soluble in benzene, acetone, ethyl acetate, toluene dichloromethane and slightly soluble in ether, does not dissolve in water. Provides powerful and antioxidant properties with excellent high temperature and flex resistance to rubber compounds.

Miracll Chemicals E 90 banner

Miracll ChemicalsMiracll Chemicals E 90

Polymer Name:Thermoplastic Polyurethane (unspecified)
Processing Methods:Compounding
End Uses:Fuel Pipes, Automotive Components, Bellows, Seats, Hoses, Cables, Wires, Gaskets, Tubes

Miracll Chemicals E 90 is a polyester-based thermoplastic polyurethane used for wide variety of applications.

Miracll Chemicals E 80 banner

Miracll ChemicalsMiracll Chemicals E 80

Polymer Name:Thermoplastic Polyurethane (unspecified)
Processing Methods:Compounding
End Uses:Fuel Pipes, Automotive Components, Bellows, Seats, Hoses, Cables, Wires, Gaskets, Tubes

Miracll Chemicals E 80 is a polyester-based thermoplastic polyurethane used for wide variety of applications.

fluteck™ F100 banner

Fluorsealsfluteck™ F100

Polymer Name:Perfluoroalkoxy Polymer (PFA)

fluteck™ F100 PFA is a thermoplastic fluoropolymer based on perfluoroalkoxy resin (PFA).