Products in Exterior & Body: Polyacetal Homopolymer (POM)

JURAPOM® X60 025 NC00 1000 is a pom-c, %20 glass bead, natural (Heat stab.) for injection application.

Ekatal® H, Our POM compounds (homo-polymers). For cable and hose holders in vehicle construction, wheel hubs, etc. Opel QK 001903 (Opel materialapproval ) Opel QK 001904 (Opel material approval).

BARLOG plastics GmbH Kebaform® / C 25 H is a new type of POM that was developed specially for sliding and wear applications. Compared to a standard POM copolymer, the material is characterized by a higher crystalline structure and thus better wear properties and a higher melting temperature. Kebaform® / C 25 H improves the sliding and wear behavior solely by modifying the polymer chain and there is no reduction in mechanical properties due to the addition of tribologically active additives. Due to its property profile, Kebaform® / C 25 H is particularly well suited for applications that require good sliding and wear behavior, but do not allow compromises in mechanical properties, e.g. For gears, rollers, plain bearings, guide bushes, etc.

BARLOG plastics GmbH Kebaform® / C 130 H is a new type of POM that was developed specially for sliding and wear applications. Compared to a standard POM copolymer, the material is characterized by a higher crystalline structure and thus better wear properties and a higher melting temperature. Due to its property profile, Kebaform® / C 130 H is particularly well suited for applications that require good sliding and wear behavior, but do not allow any compromises in mechanical properties, e.g. For gears, rollers, plain bearings, guide bushes, etc.

Ziaform® H is already used in the automotive, E&E, construction and consumer goods industry, the recyclates / ZIA compounds from MKV offer a real alternative to virgin material.

Titacon® UV900 is a MEDIUM FLOW, WEATHER RESISRANCE, ANTI-UV.

POM copolymer unreinforced, dry blend with color masterbatch green, medium viscosity for injection molding

Titacon® MS904 is a 4％MOLYBDENUM DISULFIDE FILLED, WEAR RESISTANCE, MEDIUM FLOW.

Titacon® TF905 is a 5％PTFE POWDER FILLED, WEAR RESISTANCE, MEDIUM FLOW.

Titacon® ST220 is a EXTRUSION GRADE, PERMANENT ANTI-STATIC, NON-SLOUGHING, WEAR RESISTANCE, COLORABLE.

Titacon® NW901 is a LOW TEMPERATURE IMPACT, TOUGHNESS.

Titacon® GF925UV is a 25％GLASS FIBER REINFORCED, HIGH STRENGTH/STIFFNESS, WEATHER RESISTANCE.

Titacon® TX925 is a LOW TEMPERATURE IMPACT, TOUGHNESS.

POM copolymer unreinforced, medium viscosity, UV stabilized

Titacon® TF410 is a 10％PTFE POWDER FILLED, WEAR RESISTANCE, HOMO-POLYACETAL, MEDIUM FLOW.

Titacon® GF920TF10 is a 20％GLASS FIBER REINFORCED, 10％PTFE FILLED, HIGH STRENGTH/STIFFNESS, DIMENSIONAL ACCURACY, WEAR RESISTANCE.

POM copolymer unreinforced, medium viscosity, optimized crystallization behavior

Titacon® AL900 is a CHEMICAL LUBRICATION, LOW WEAR/FRICTION, LOW NOISE, HOMO-POLYACETAL, HIGH FLOW.

POM copolymer unreinforced, medium viscosity, worldwide drinking water approvals

BARLOG plastics GmbH Kebaform® / C FE 161105 is a tribologically optimized POM copolymer which, due to its property profile, is particularly suitable for applications that require good sliding and wear behavior.

Titacon® CF920 is a 20％CARBON FIBER REINFORCED, WEAR RESISTANCE, HIGH STIFFNESS/STRENGTH

POM copolymer unreinforced, medium viscosity for injection molding

Titacon® TX910 is a IMPACT MODIFIED, TOUGHNESS, MEDIUM FLOW.

Titacon® EX210 is a EXTRUSION GRADE, PERMANENT ANTI-STATIC, CARBON BLACK.