Products in Exterior & Body: Polyacetal Homopolymer (POM)

BARLOG plastics GmbH Kebaform® / C 901 TS is a specially modified type, which is characterized by excellent sliding and wear properties. Despite the highly efficient modification with PTFE and a special silicone oil, Kebaform® / C 901TS has excellent mechanical properties. Kebaform® / C 901TS is used wherever high demands are placed on wear resistance, uniformity of friction behavior under changing conditions and low noise levels, and at the same time the mechanical property profile of a technical construction material is required. Kebaform® / 901TS is particularly suitable for sliding pairings with changing operating conditions, e.g. B. When starting behavior without stick-slip effect is just as required as high wear resistance over the entire service life.

Titacon® MS902 is a 2.5％MOLYBDENUM DISULFIDE FILLED, WEAR RESISTANCE, MEDIUM FLOW.

Titacon® CW901 is a CHEMICAL LUBRICATION, WEAR RESISTANCE, LOW SPEED/HIGH LOAD APPLICATION.

Titacon® GF925TF10 is a 25％GLASS FIBER REINFORCED, 10％PTFE FILLED, HIGH STRENGTH/STIFFNESS, DIMENSIONAL ACCURACY, WEAR RESISTANCE.

Titacon® TX920 is a LOW TEMPERATURE IMPACT, TOUGHNESS.

Titacon® CF910 is a 10％CARBON FIBER REINFORCED, WEAR RESISTANCE, HIGH STIFFNESS/STRENGTH.

Titacon® TR720 is a 15 T ALC FILLED H IGH STIFFNESS L OW WARPAGE D IMENSIONAL ACCURACY M EDIUM FLOW

Michael Day Enterprises AH10 is a 1 melt flow acetal homopolymer.

Titacon® GB920 is a 20 G LASS B EADS FILLED L OWER WARPAGE

JURAPOM® X60 025 NC00 1000 is a pom-c, %20 glass bead, natural (Heat stab.) for injection application.

Titacon® GB925 is a 25％GLASS BEADS FILLED, DIMENSIONAL ACCURACY, LOWER WARPAGE.

BARLOG plastics GmbH Kebaform® / C 25 H is a new type of POM that was developed specially for sliding and wear applications. Compared to a standard POM copolymer, the material is characterized by a higher crystalline structure and thus better wear properties and a higher melting temperature. Kebaform® / C 25 H improves the sliding and wear behavior solely by modifying the polymer chain and there is no reduction in mechanical properties due to the addition of tribologically active additives. Due to its property profile, Kebaform® / C 25 H is particularly well suited for applications that require good sliding and wear behavior, but do not allow compromises in mechanical properties, e.g. For gears, rollers, plain bearings, guide bushes, etc.

BARLOG plastics GmbH Kebaform® / C 130 H is a new type of POM that was developed specially for sliding and wear applications. Compared to a standard POM copolymer, the material is characterized by a higher crystalline structure and thus better wear properties and a higher melting temperature. Due to its property profile, Kebaform® / C 130 H is particularly well suited for applications that require good sliding and wear behavior, but do not allow any compromises in mechanical properties, e.g. For gears, rollers, plain bearings, guide bushes, etc.

Titacon® GB910L is a 10％GLASS BEADS FILLED, LOW WARPAGE, SURFACE LUBRICATED.

Ekatal® H, Our POM compounds (homo-polymers). For cable and hose holders in vehicle construction, wheel hubs, etc. Opel QK 001903 (Opel materialapproval ) Opel QK 001904 (Opel material approval).

Titacon® EX910 is a INJECTION MOLDING GRADE, PERMANENT ANTI-STATIC, CARBON BLACK.

Titacon® GF525 is a 25％GLASS FIBER FILLED, HIGH STRENGTH/STIFFNESS, HOMO-POLYACETAL.

Michael Day Enterprises AH90 is a 18-20 melt flow acetal homopolymer.

Titacon® TF910 is a 10％PTFE POWDER FILLED, WEAR RESISTANCE, MEDIUM FLOW.

Titacon® ST915 is a INJECTION MOLDING GRADE, PERMANENT ANTI-STATIC, NON-SLOUGHING, WEAR RESISTANCE, IMPACT MODIFIED, COLORABLE.

Titacon® TR905 is a 5％TALC FILLED, LOW WARPAGE, DIMENSIONAL ACCURACY, MEDIUM FLOW.

Titacon® KG920 is a 20％WHISKER FILLED, WEAR RESISTANCE, HIGH STIFFNESS.

Titacon® GB915 15 G LASS B EADS FILLED D IMENSIONAL ACCURACY L OWER WARPAGE

Titacon® CL500 is a CHEMICAL LUBRICATION, LOW WEAR/FRICTION, LOW NOISE, HOMO-POLYACETAL, MEDIUM FLOW.

Titacon® EW901 is a CHEMICAL LUBRICATION, HIGH SPEED/LOW LOAD APPLICATION, LOW NOISE.

Titacon® GF520 20％GLASS FIBER REINFORCED, HIGH STRENGTH/STIFFNESS, HOMO-POLYACETAL.

Titacon® NC940 is a PERMANENT ANTI-STATIC, CARBON NANOTUBE FILLED.

Titacon® TF918K7 is a PTFE / ARAMID FIBER FILLED, WEAR RESISTANCE, LOW FRICTION, NON-ABRASIVE TO METAL.

Polyoxymethylen +25% fiber glass abbreviated as POM+GF25 used in Automotive, Terminal Blocks, Plugs & Sockets applications.

BARLOG plastics GmbH Kebaform® / C 904 UR is a normal viscous, elastomer-containing injection molding grade based on Kebaform® / C 90.0. The increased elastomer content results in a very high level of toughness. The absorption capacity for high dynamic loads is excellent. Fields of application are e.g. The outsert technology, rollers, belt buckles, transport chains, fastening elements, etc.

Titacon® TX915 is a IMPACT MODIFIED, TOUGHNESS, MEDIUM FLOW.

Titacon® TF905S2 is a 5％PTFE /2%SILICONE FILLED, WEAR RESISTANCE, MEDIUM FLOW.

Titacon® SI902 is a 2％SILICONE FILLED, LOW FRICTION, MEDIUM FLOW.

Polyoxymethylen abbreviated as POM.

POM copolymer unreinforced, medium viscosity