Products in Fuel Systems: Automotive Interior Parts

SABIC's Specialties Business ULTEM™ Resin 1010UCL is an amorphous, transparent polyetherimide (PEI) thermoplastic offering enhanced flow and a glass transition temperature (Tg) of 217°C. 1010UCL offers the same performance as ULTEM 1010 resin and offers further enhanced cleanliness control for (optical) applications. The natural (uncolored) version of this grade is compliant with RoHS and also with Halogen Free standards as IEC 61249-2-21 and e.g. IPC 4101E. For colored versions, compliance needs to be checked case by case.

SABIC's Specialties Business ULTEM™ 1010AR Resin is an unreinforced amorphous polyetherimide (PEI) resin that may offer a high glass transition temperature (Tg) of 217°C, improved flow and it contains internal mold release. Features are excellent mechanical, electrical and dimensional properties up to high temperatures. The material may offer very good chemical resistance for an amorphous material and is inherently flame retardant. The material is RoHS compliant. The material is available in opaque and transparent colors.

MOCOM Compounds ALTECH® ECO PA66 2020/116 GF20 IM is an impact-modified, recycled material containing polyamide 66 with 20% glass fibers. It is suitable for a variety of applications including oil pump parts, housing, automotive trim unpainted, cooling systems, filter systems, and transport systems. To ensure optimal results, pre-drying is recommended at 80°C in a dry air (dessiccant) dryer for 2-12 hours depending on moisture content, with a maximum moisture content of 0.15%. When processing with injection molding, melt temperature should range between 280-300°C, and mold temperature should range between 80-120°C. This material is suitable for automotive, building and construction, and various other market segments.

MOCOM Compounds ALTECH® ECO PA66 2035/500 GF35 is a heat-stabilized polyamide 66 with a filler/additive system of 35% glass fibers containing recycled material. It is suitable for use in automotive and other various market segments, such as cooling systems, chassis, steering, and radiator systems. Typical applications include oil pump parts, housing, automotive trim unpainted, oil pans/sumps, and bearing cages.

MOCOM Compounds ALTECH® ECO PA66 2030/116.01 GF30 is an impact-modified and processing-stabilized polyamide 66 resin with 30% glass fibers and recycled material. It is suitable for applications such as oil pump parts, housings, and automotive trim unpainted, cooling systems, chassis, steering, and impact protection/shock absorbers. For injection molding, the melt temperature should be between 280-300°C and the mold temperature should be between 80-120°C. It is suitable for the automotive market segment and provides excellent mechanical properties.

MOCOM Compounds ALTECH® ECO PA66 2030/116 GF30 is a polyamide 66 base polymer with 30% glass fibers, impact modified and containing recycled material, specifically designed for automotive and other market segments. It is suitable for applications such as cooling systems, chassis, steering, oil pump parts, housings, automotive trim unpainted, impact protection/shock absorbers, and more. During processing, injection molding should be done with a melt temperature of 280-300°C and a mold temperature of 80-120°C.

MOCOM Compounds ALTECH® PA6 A 4030/109 MR30 is a Polyamide 6 grade containing a 30% mineral filler/additive system and heat stabilized for improved flow characteristics during injection molding. It is suitable for a wide range of automotive, machinery, electrical and electronic, furniture, building and construction, sport and leisure, packaging, medical/personal care, lighting, and information technology applications. Typical applications include racking/shelving, airbag components, batteries, fixing elements, power drills, clips, roof boxes and more. Processing conditions should include a melt temperature of 270-290°C and a mold temperature of 80-100°C for optimal performance, while pre-drying conditions should include 80°C in a dry air (dessiccant) dryer for 2-12 hours, depending on the moisture content.

TALENE M4012 B01 is a 40% talc filled polypropylene homopolymer with good flow and high stiffness. It has high long term heat aging stability. It is designed for injection molding applications for interior automotive parts with good dimensional stability. The product is available in black color. It is not intended for medical, pharmaceutical and/or drinking water applications.

Neoplast™ 173 C are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

Rubaloy RA - 4465 is a blend of specially selected polymers viz. Ultra high Acrylonitrile Butadiene Rubber (44% ACN Content) and pre-treated Poly Vinyl Chloride resin. This highly fuel resistant (Fuel 'A', 'B' and 'C') blend is an excellent replacement for conventionally used specialty Synthetic Rubbers. This grade is Pthalate free amd has improved flexibility as well as abrasion resistance. It has excellent color fastness and very low permeability; it has a low die swell property for Extrusions and Calendaring.

Paychlor K-45 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

VinoPrene 700 are a group of nitrile rubber (NBR) / Polyvinyl Chloride (PVC) blends.

Vinoplast 466 are a group of nitrile rubber (NBR) / Polyvinyl Chloride (PVC) blends.

Kiamid 6 S3C-1.0 NT is a unamplified Polyamide 6.

Neoplast™ 163 M/E are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

Neoplast™ 163 FT EB are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

VinoPrene 710 are a group of nitrile rubber (NBR) / Polyvinyl Chloride (PVC) blends.

Polyplastics Group Duracon® NW-02 is an Acetal (POM) Copolymer + PE product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America.Characteristics include: Flame Rated Lubricated

GEHR PPS® is continuous operating temperature of this high-performance plastic is approximately +230 °C. It has very high mechanical performance combined with excellent thermal and chemical resistance as well as high dimensional stability and creep resistance. The LOI of this material is among the highest among polymers. The excellent hardness and stiffness are further characteristics of PPS. It closes the gap between semi-crystalline, engineering plastics and PEEK through its strength and economic efficiency.

Paychlor K-62 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

TİSESTER F 20D03 K02 R01 is a PBT, 20% Glass Fiber Reinforced, Heat Stabilized, Natural.

Vinoplast 550 are a group of nitrile rubber (NBR) / Polyvinyl Chloride (PVC) blends.

VinoPrene 707 are a group of nitrile rubber (NBR) / Polyvinyl Chloride (PVC) blends.

Glass Sphere Reinforced Nylon Resin (PA66)

Neoplast™ 180 C are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

Glass Sphere Reinforced Nylon Resin (PA66)

AFT Fluorotec AF1008 U203-D57G is a hydrolysis resistant PU (H-PU) composed of prepolymers based on polyoxytetrametylene glycol (PTMEG) and diphenylmethane diisocyanate (MDI) processed liquid with catalysts and a MoS2 polyol. The hardness is adjusted at 57 +/-2 Shore D which makes it an excellent extrusion resistant material. This special MoS2 composition performs excellent in critical lubrication situations and reducing the stick-slip behavior.

STARCOM S/2000 is a PVC grade product.

Neoplast™ 155 FT EB are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

Paychlor K-40 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

VinoPrene 701 are a group of nitrile rubber (NBR) / Polyvinyl Chloride (PVC) blends.

Vinoplast 582 are a group of nitrile rubber (NBR) / Polyvinyl Chloride (PVC) blends.

Paychlor D-40 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

TİSESTER® F 10D03 R01 is a PBT, 10% Glass Fiber Reinforced, Natural

ANTIMICROBIAL MB 02SV 91A002 AM (SQ 3286) is used for Water Storage Tanks, ABS Components, Mobile Panels,Electronic Devices.

Sebamide 6 S3C-0 is a unamplified Polyamide 6.