Products in Fuel Systems: Consumer Applications

SABIC's Specialties Business LNP ELCRES EXL9334 is based on Polycarbonate (PC) siloxane copolymer resin. It is a UV stabilized, medium flow opaque material suitable for injection molding (IM) and sheet extrusion applications. This grade offers UL94 V0 @ 1.5mm flame retardancy based on non-bromine, non-chlorine FR systems, extreme low temperature ductility (-40°C) characteristics and excellent processability with opportunities for shorter IM cycle times compared to standard PC. It is available in a wide range of opaque colors and may be an excellent candidate for a wide range of applications.

SABIC's Specialties Business ULTEM™ Resin 1010UCL is an amorphous, transparent polyetherimide (PEI) thermoplastic offering enhanced flow and a glass transition temperature (Tg) of 217°C. 1010UCL offers the same performance as ULTEM 1010 resin and offers further enhanced cleanliness control for (optical) applications. The natural (uncolored) version of this grade is compliant with RoHS and also with Halogen Free standards as IEC 61249-2-21 and e.g. IPC 4101E. For colored versions, compliance needs to be checked case by case.

SABIC's Specialties Business EXL9330 is an opaque (PC)- siloxane copolymer resin that offers extreme low temperature (-60 C) ductility in combination with excellent processability. This UV stabilized, medium flow resin features UL f1/V-0/5VA rating with non-chlorinated, non-brominated flame retardant agents for wide range of colors. EXL9330 is an excellent candidate for a broad range of applications such as mobile phones, tablets, industrial housings, electric circuit protection, personal safety helmets, electric vehicle supply equipment (EVSE) housings and connectors.

SABIC's Specialties Business LEXAN EXL9134 polycarbonate (PC) siloxane copolymer resin is a UV stabilized high flow opaque injection molding (IM) grade. This resin offers UL94 V0 @ 1.5mm flame retardancy based on non-bromine, non-chlorine FR systems, extreme low temperature ductility (-40 deg C) characteristics and excellent processability with opportunities for shorter IM cycle times compared to standard PC. LEXAN EXL9134 resin is available in a wide range of opaque colors and may be an excellent candidate for a wide range of applications.

SABIC's Specialties Business FXE9330 PC-Siloxane copolymer is a special effects fluorescent with excellent processability and low temperature impact performance. Non-chlorinated, non-brominated flame retardant product in most colors. UV-stabilized. UL rated f1/V-0/5VA.

SABIC's Specialties Business ULTEM™ 1010AR Resin is an unreinforced amorphous polyetherimide (PEI) resin that may offer a high glass transition temperature (Tg) of 217°C, improved flow and it contains internal mold release. Features are excellent mechanical, electrical and dimensional properties up to high temperatures. The material may offer very good chemical resistance for an amorphous material and is inherently flame retardant. The material is RoHS compliant. The material is available in opaque and transparent colors.

VYNOVA™ S7102 is a high molecular weight and high porosity vinyl chloride homopolymer. It is a specialty resin suitable for extrusion, calendering or injection molding of semi-rigid and flexible PVC articles such as: cling films, flexible sheets, pool liners, inflatables, roofing membrane, profiles, cables insulation and sheathings, and flooring.

VYNOVA™ S6502 is a high molecular weight and high porosity vinyl chloride homopolymer. It is a general purpose resin suitable for extrusion, calendering of both rigid and flexible PVC articles: profiles, sheets & films, compounds, and flooring.

ISOTHANE 1065A are poly(adipate)ester based thermoplastic polyurethanes, thermoforming TPU. They exhibit excellent toughness, abrasive resistance, and solvent resistance. These products can be injection molded, blow molded, and extruded.

Nano4 BioPE EC 12 is an electrically conductive thermoplastic compound based on bio-polyethylene.

Elastocon® 3353 is a white S-B-S thermoplastic elastomer formulated for applications that require rubber-like properties and a good surface finish. Elastocon® 3353 is heat sealable and well suited for consumer goods and extruded tubing and profile applications. Elastocon® 3353 can be overmolded and/or coextruded onto polystyrene.Elastocon® 3353 is supplied as ready to use pellets in 50 lb. bag quantities.

ISOTHANE 1075A are poly(adipate)ester based thermoplastic polyurethanes, thermoforming TPU. They exhibit excellent toughness, abrasive resistance, and solvent resistance. These products can be injection molded, blow molded, and extruded.

STARCOM S/2000 is a PVC grade product.

ISOTHANE 1070A are poly(adipate)ester based thermoplastic polyurethanes, thermoforming TPU. They exhibit excellent toughness, abrasive resistance, and solvent resistance. These products can be injection molded, blow molded, and extruded.

Formlabs Flexible Resin is excellent for simulating soft-touch materials and adding ergonomic features to multi-material assemblies.

ISOTHANE 1085A are poly(adipate)ester based thermoplastic polyurethanes, thermoforming TPU. They exhibit excellent toughness, abrasive resistance, and solvent resistance. These products can be injection molded, blow molded, and extruded.

Formlabs Flexible 80A is excellent for simulating soft-touch materials and adding ergonomic features to multi-material assemblies.

Robinson Brothers ZDEC 20636 is much used as an active secondary accelerator. Can act as primary in latex.

Nano4 Bio PE EC MB 12 is an electrically conductive masterbatch based on bio-polyethylene.

ISOTHANE 1080A are poly(adipate)ester based thermoplastic polyurethanes, thermoforming TPU. They exhibit excellent toughness, abrasive resistance, and solvent resistance. These products can be injection molded, blow molded, and extruded.

Nano4 Bio EC 12 is an electrically conductive thermoplastic compound based on bio-polyethylene.

Elastocon® 3360 is a white S-B-S thermoplastic elastomer formulated for applications that require rubber-like properties and a good surface finish. Elastocon® 3360 is heat sealable and well suited for consumer goods and extruded tubing and profile applications. Elastocon® 3360 can be overmolded and/or coextruded onto polystyrene.Elastocon® 3360 is supplied as ready to use pellets in 50 lb. bag quantities.

Optiform POM SZ, applications include Fiberglass, Fillers: talc, wollastonite, glass balls, kaolin, chalk, metal powder, carbon black , TiO 2, etc, Synthetic fibers: PET, aramid fibers, carbon fibers (CF), Impact modifier, Flame retardant (halogen-free, halogen-containing),Coloring according to RAL, slide modified.

ISOTHANE 1090A are poly(adipate)ester based thermoplastic polyurethanes, thermoforming TPU. They exhibit excellent toughness, abrasive resistance, and solvent resistance. These products can be injection molded, blow molded, and extruded.

Da/Pro Rubber TPE elastomers add soft-touch grips, high tech looks, multiple color capability, scents, surface textures and more to a variety of components. TPE elastomer molding is being used in consumer products, industrial products, medical device components, electrical products and in almost every other industry.

Nano4 Bio EC MB 12 is an electrically conductive thermoplastic compound based on biopolymer PLA. In addition to the conductive properties, BIO EC 12 MB has very good mechanical properties and is easy to use in injection molding. BIO EC 12 MB is based on a 100% bio-sourced polymer matrix.