LNP™ ELCRES™ EXL9334

Identification & Functionality

Additives Included

Flame Retardant,

Heat Stabilizer,

UV Stabilizer

Polymer Name

Polycarbonate-Siloxane Copolymer

Plastics & Elastomers Functions

Resin

Technologies

Plastics

Product Families

Plastics — Engineering & Specialty Polymers

High Performance Thermoplastics,

Polycarbonates

Features & Benefits

Labeling Claims

Bromine-free,

Chlorine-free

Materials Features

Flame Retardant,

Good Flow,

Good Processability,

Good UV Stability,

Good Weather Stability,

Heat Stabilized,

High Flowability,

High Impact Resistance,

Low Temperature Impact Resistance,

Medium Flow,

Non-Halogenated,

Non-brominated,

Non-chlorinated,

UV Resistant,

UV Stabilized,

Unreinforced

Applications & Uses

Markets

Automotive & Transportation,

Building & Construction,

Consumer Goods,

Electrical & Electronics,

Healthcare & Pharma,

Industrial

Applications

Consumer Goods — Appliances & Electronics

Automotive & Transportation — Automotive

Automotive Lighting,

Exterior & Body,

Fuel Systems,

Interior

Building & Construction — Building Envelope & Roofing

Glazing & Window Elements

Building & Construction — Building Materials

Interior Fixtures

Industrial — Chemical & Industrial Manufacturing

Equipment & Parts

Building & Construction — Decorative Materials & Finishes

Artificial Turf

Electrical & Electronics — Devices & Assemblies

Consumer Electronics,

Displays,

Industrial Automation,

Lighting

Consumer Goods — Housewares

Consumer Goods — Lawn & Garden

Healthcare & Pharma — Medical

Medical Devices & Assemblies

Electrical & Electronics — Parts & Components

Batteries,

Connectors,

Housings & Enclosures,

Switches & Relays

Automotive & Transportation — Transportation

Aerospace & Aviation,

Off Road & Recreational Vehicle (RV),

Rail & Mass Transit

Plastics & Elastomers End Uses

Aerospace Applications,

Air Cabin Interior,

Aircraft Seat,

Appliances,

Audio Equipment,

Automotive Applications,

Battery Cell,

Building Materials,

Cell Phones,

Circuit Protection,

Computer Components,

Construction Applications,

Consumer Applications,

Covers,

Displays,

Electric Vehicles,

Electrical Components,

Electrical/Electronic Applications,

Electronic Components,

Enclosure,

Energy Management,

Energy Storage,

Front Spoiler,

Fuel Cells,

Garden Equipment,

Home Appliances,

Home Decoration,

Home Decors,

Household Goods,

Housings,

Industrial Applications,

LED Lighting,

Lawn Equipment,

Lighting Applications,

Medical Devices,

Medical/Healthcare Applications,

Modular Panel,

Non-LED Lighting,

Pool Covers,

Power Manangement,

Rail Cabin Interiors,

Rails,

Recreational Vehicle Components,

Refrigerator,

Side Spoiler,

Solar Photovoltaic Device,

Specialty Vehicles,

Tablets,

Tarpaulins,

Turf Applications,

Wearable Device,

White Goods & Small Appliances,

Wireless Communication

Plastics & Elastomers Processing Methods

Injection Molding,

Sheet Extrusion

Properties

Color

Opaque

Flame Rating

UL 94 5VA,

UL 94 V0

Mechanical Properties

	Value	Units	Test Method / Conditions
Tensile Stress (Yield, Type I, 50 mm/min) ¹¹	58	MPa	ASTM D638
Tensile Stress (Break, Type I, 50 mm/min) ¹¹	59	MPa	ASTM D638
Tensile Strain (Yield, Type I, 50 mm/min) ¹¹	6	%	ASTM D638
Tensile Strain (Break, Type I, 50 mm/min) ¹¹	115	%	ASTM D638
Tensile Modulus (at 5 mm/min) ¹¹	2100	MPa	ASTM D638
Flexural Stress (Yield, 1.3 mm/min, 50 mm span) ¹¹	89	MPa	ASTM D790
Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹	2050	MPa	ASTM D790
Tensile Stress (Yield, 50 mm/min) ¹¹	56	MPa	ISO 527
Tensile Stress (Break, 50 mm/min) ¹¹	57	MPa	ISO 527
Tensile Strain (Yield, 50 mm/min) ¹¹	6	%	ISO 527
Tensile Strain (Break, 50 mm/min) ¹¹	108	%	ISO 527
Tensile Modulus (at 1 mm/min) ¹¹	2000	MPa	ISO 527
Flexural Stress (Yield, at 2 mm/min) ¹¹	87	MPa	ISO 178
Flexural Modulus (at 2 mm/min) ¹¹	2100	MPa	ISO 178

Physical Properties

	Value	Units	Test Method / Conditions
Specific Gravity ¹¹	1.19	—	ASTM D792
Mold Shrinkage (flow) ᵍ ¹¹	0.4 - 0.8	%	SABIC method
Mold Shrinkage (xflow) ᵍ ¹¹	0.4 - 0.8	%	SABIC method
Melt Flow Rate (at 300°C, 1.2 kgf) ¹¹	10	g/10 min	ASTM D1238
Density ¹¹	1.19	g/cm³	ISO 1183
Moisture Absorption (at 23°C, 50% RH) ¹¹	0.15	%	ISO 62
Water Absorption (at 23°C, saturated) ¹¹	0.4	%	ISO 62-1
Melt Volume Rate (at 300°C, 1.2 kg) ¹¹	9	cm³/10 min	ISO 1133

Thermal Properties

	Value	Units	Test Method / Conditions
Heat Deflection Temperature (at 0.45 MPa, 3.2 mm, Unannealed) ¹¹	140	°C	ASTM D648
Vicat Softening Temperature (Rate B/50) ¹¹	139	°C	ISO 306
Vicat Softening Temperature (Rate B/50) ¹¹	140	°C	ASTM D1525
Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹	123	°C	ASTM D648
Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹¹	0.000061	1/°C	ASTM E831
Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹¹	0.000062	1/°C	ASTM E831
Coefficient of Thermal Expansion (at 23°C to 80°C, flow) ¹¹	0.000061	1/°C	ISO 11359-2
Coefficient of Thermal Expansion (at 23°C to 80°C, xflow) ¹¹	0.000065	1/°C	ISO 11359-2
Vicat Softening Temperature (Rate B/120) ¹¹	141	°C	ISO 306
Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80*10*4, sp=64mm) ¹¹	118	°C	ISO 75/Af
Relative Temperature Index (Electrical) ᵖ ¹¹	125	°C	UL 746B
Relative Temperature Index (Mechanical with impact) ᵖ ¹¹	110	°C	UL 746B
Relative Temperature Index (Mechanical without impact) ᵖ ¹¹	120	°C	UL 746B

Electrical Properties

	Value	Units	Test Method / Conditions
Comparative Tracking Index (UL, PLC) ¹¹	3	PLC Code	UL 746A
High Ampere Arc Ignition (PLC 0) ¹¹	3	mm	UL 746A
High Ampere Arc Ignition (PLC 1) ¹¹	0.75	mm	UL 746A
Hot Wire Ignition (PLC 2) ¹¹	3	mm	UL 746A
Hot Wire Ignition (PLC 3) ¹¹	0.75	mm	UL 746A
Volume Resistivity ¹¹	1.00E+16	Ω.cm	ASTM D257

Impact Properties

	Value	Units	Test Method / Conditions
Izod Impact (Unnotched, at -30°C) ¹¹	No break	J/m	ASTM D4812
Izod Impact (Unnotched, at 23°C) ¹¹	No break	J/m	ASTM D4812
Izod Impact (Notched, at 23°C) ¹¹	7.50E+02	J/m	ASTM D256
Izod Impact (Notched, at -30°C) ¹¹	725	J/m	ASTM D256
Izod Impact (Notched, at -40°C) ¹¹	685	J/m	ASTM D256
Izod Impact (Unnotched, 80*10*3, at 23°C) ¹¹	No break	kJ/m²	ISO 180/1U
Izod Impact (Unnotched, 80*10*3, at -30°C) ¹¹	No break	kJ/m²	ISO 180/1U
Izod Impact (Notched, 80*10*3, at 23°C) ¹¹	65	kJ/m²	ISO 180/1A
Charpy Impact (at 23°C, V-notch Edgew 80*10*3 sp=62mm) ¹¹	70	kJ/m²	ISO 179/1eA
Charpy Impact (at 23°C, Unnotch Edgew 80*10*3 sp=62mm) ¹¹	No break	kJ/m²	ISO 179/1eU
Charpy Impact (at -30°C, Unnotch Edgew 80*10*3 sp=62mm) ¹¹	No break	kJ/m²	ISO 179/1eU

Injection Molding

	Value	Units	Test Method / Conditions
Drying Temperature ᵏ	120	°C	—
Drying Time ᵏ	3 - 4	Hrs	—
Drying Time (Cumulative) ᵏ	48	Hrs	—
Maximum Moisture Content ᵏ	0.02	%	—
Melt Temperature ᵏ	295 - 315	°C	—
Nozzle Temperature ᵏ	290 - 310	°C	—
Front - Zone 3 Temperature ᵏ	295 - 315	°C	—
Middle - Zone 2 Temperature ᵏ	280 - 305	°C	—
Rear - Zone 1 Temperature ᵏ	270 - 295	°C	—
Mold Temperature ᵏ	70 - 95	°C	—
Back Pressure ᵏ	0.3 - 0.7	MPa	—
Screw Speed ᵏ	40 - 70	rpm	—
Shot to Cylinder Size ᵏ	40 - 60	%	—
Vent Depth ᵏ	0.025 - 0.076	mm	—

Flame Characteristics

	Value	Units	Test Method / Conditions
UL Recognized (94V-0 Flame Class Rating) ᵖ	min. 1.5	mm	UL 94
UL Recognized (94-5VA Flame Class Rating) ᵖ	min. 3	mm	UL 94
Glow Wire Ignitability Temperature (at 1.5 mm) ᵖ	825	°C	IEC 60695-2-13
Glow Wire Flammability Index (at 1.5 mm) ᵖ	960	°C	IEC 60695-2-12

Note

• ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.
• ᵏ Back Pressure, Screw Speed, Shot to Cylinder Size and Vent Depth are only mentioned as general guidelines. These may not apply or need adjustment in specific situations such as low shot sizes, thin wall molding and gas-assist molding. Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.
• ᵖ UL ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card.
• ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.

 

Regulatory & Compliance

Certifications & Compliance

UL 94

Packaging & Availability

Country Availability

Canada,

China (Mainland),

Mexico,

USA

Regional Availability

• Americas
• Asia
• Europe
• North America