Products in Interior: Unsaturated Polyester (UPE)

Crystic® Orthophthalic Spray Topcoat 408PA White is a pre-accelerated flowcoat with excellent scuff resistance, designed for use in general purpose GRP moldings. It is based on a high quality orthophthalic unsaturated polyester resin and is suitable for all general molding requirements. The product is pigmented using a highly UV resistant grade of titanium dioxide.

Crystic® Resin S15.6 is a very flexible unsaturated polyester resin based on adipic acid. It can be used alone or in conjunction with other polyester resins for the manufacturing of flexible products. Impregnating resins particularly isophtalic resins can be flexibilised by addition of Crystic® Resin S15.6 without any significant impact on the chemical resistance properties.

Crystic® Polyester Resin 272 is an isophthalic polyester resin. It is recommended for use in high-performance applications using filament winding, pultrusion, and centrifugal or contact molding processes. The fully cured laminates have high mechanical strength and excellent strength retention in wet environments at temperatures up to 60ºC.

Crystic® Polyester Resin 921 is an un-accelerated, orthophthalic, unsaturated polyester resin with a low viscosity to accept the maximum level of filler particles. It has been developed specifically for polymer concrete. Crystic® 921PALV is a lower viscosity, thixotropic version of this product. It is suitable for pigmented castings filled to a low level or not filled at all.

Crystic® Fire Retardant Resin U1007TPA is a filled, fire-retardant, pre-accelerated, thixotropic unsaturated polyester resin designed for RTM and RTM light. It cures with standard MEKP peroxide and has a 17-minute gel time. This product will achieve M2 to the French fire standard.

Crystic® Polyester Resin U904LVK is an orthophtalic, pre accelerated, non thixotropic, unsaturated polyester resin. It has to be used when good mechanical properties and good heat resistance are required. The product has been designed to be catalysed with a conventional MEKP at 50% while giving a very fast demold time under quite low exotherm.

Norsodyne® BR-270HV - multicolor application, high viscosity, thixotropic, good workability, for rods production. Main applications areas are leisure and clothing etc.

NORESTER 912 TPAV is a Orthophthalic lamination resin, Thixotropic and pre-accelerated product, Resin with low styrene emissions, Several versions available ( White tint, Different gel times ),

Aekyung Chemical SLO-180NT is an ortho type UPR.

ORTHOPHTHALATES OP1004 is a Cultured Marble.

Polydyne® 6120 is general purpose, preaccelerated, thixotropic with low reactivity. And it is generally used in composites applicatons.

Nord Composites GC 181 is a gel coat based on isophthalic resin, thixotropic and pre-accelerated product, for quality applications, without sagging on vertical walls, gel coat with good mechanical, impact and UV resistance.

Stypol® 040-2989 - isophthalic laminating tooling resin. Main applications areas are automotive, composites, industrial sector, marine, mass transports, mold manufactur etc.

NORSODYNE® M 01070 - Pure maleic unsaturated polyester resin in styrene. It is used to produce bmc and smc manufacture,very good mechanical properties through hot press molding,injection molding,rtm method.

Nord Composites GC 983 is a gel coat based on Isophthalic resin, thixotropic and pre-accelerated product, gel coat with low styrene content, Good hardening.

Norsodyne® 3338W has general purpose, good water resistance, promoted and wax version of Norsodyne® 3338. Main applications areas are automotive, building and construction, industrial sector, marine etc.

Stypol® RHPS1221 - pre-promoted unsaturated polyester resin, high performance RTM laminating. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.

KPR 6430 by Kemrock Industries and Exports is a general purpose, orthophthalate-based unsaturated polyester resin (UPR). It is available as liquid and cast resin. Offers excellent mechanical and corrosion resistance properties. KPR 6430 is suitable for processing by sheet and dough molding (SMC/DMC). Recommended for FRP composites.

Ares P100 is orthophthalic resin with good reactivity, good elongation, versatile for all sectors. Good mechanical characteristics, compatibility with glass fibers and good wettability of the fillers. Clear resin ideal for spray up.

Norsodyne® 3338 has general purpose, good water resistance, promoted and non-waxed. Main applications areas are automotive, building and construction, industrial sector, marine etc.

Aekyung Chemical SL-100 is a DCPD type UPR.

Norsodyne® BN-595Y - excellent pearl dispersion and surface gloss, thin button. Main applications areas are leisure and clothing etc.

Norsodyne® 3318FR - non-promoted and non-wax. Main applications areas are automotive, building and construction, industrial sector, marine etc.

Polynt Group 752-4420 is general purpose RTM resin with rapid cure rate for increased mold turn over; good profile; UL 94 V-O and 5V listed product; class I flame-retardant without additional additives; meets mil-r-7575c requirements for grade a applications. Main applications areas are aeronautical, agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports, railway sector etc.

Norsodyne® 2625TI - promoted and non-waxed, high cross-linked resin, high hdt, excellent chemical resistance. Main applications areas are automotive, building and construction, industrial sector, marine etc.

Polynt Group 737-6755 is general purpose RTM resin with rapid cure rate for increased mold turnover; good profile. Main applications areas are aeolian, agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.

Stypol® RSP04021 - pre-promoted unsaturated polyester DCPD blend resin. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.

NORESTER 913 TPA is a Orthophthalic lamination resin, Pre-accelerated and thixotropic product, Resin without film-forming agent, Several versions available ( White tint, Different gel times

Norsodyne® 2802Base - non-promoted and non-waxed. Main applications areas are automotive, building and construction, industrial sector, marine etc.

STYPOL® 040-8003 is a pre-promoted,flame-retardant polyester resin containing styrene monomer. It is especially formulated for production of reinforced plastic products using resin transfer molding (RTM). Certain applications with specific flame-retardant needs may require the addition of methyl methacrylate (MMA) and modest amounts of alumina trihydrate or antimony oxide/ammonium dimolybdate.

Gel Coat IN-300 (Colorless) is a high-quality decorative coating based on combination of orthophtalic and isophtalic unsaturated polyester resin, for “spray” and “hand” application. The gelcoat could be tinted to any color in accordance with RAL cataloge or with your laminate sample.

Norsodyne® 3310W has general purpose, excellent water resistance, promoted and waxed version of Norsodyne® 3310. Main applications areas are automotive, building and construction, industrial sector, marine etc.

Depol Т-810 is a non pre-accelerated unsaturated thixothropic polyester halogenated resin based on chlorendic anhydride. It is formulated for hand lay-up as well as for spray-up, RTM-technologies.

Nord Composites GC 188 is a gel coat based on isophthalic resin, thixotropic and pre-accelerated product, for quality applications, without sagging on vertical walls, gel coat with good mechanical, impact and UV resistance.

Nord Composites GC 161 is a gel coat based on ortho / Iso NPG resin. thixotropic and pre-accelerated product. For quality applications, without sagging on vertical walls. gel coat without porosity.

Polynt Group 747-5025 - isophthalic RTM resin. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.