Products in Other Automotive Applications: Compression Molding

High Strength Silicone Rubber are formulated to have higher elongation and tear strength than the General Purpose. They can be used for molding, extrusion and calendering. Colors will match your requirement.

Fluorosilicone rubber is used when higher resistance to chemicals is needed. This material has better resistance to solvents, hydrocarbon fluids and petroleum products than silicone rubber.

High Temperature Silicone Compounds can be used at temperatures of up to 300ºC for short periods of time. It is not recommended for continuous operation. High temperatures affect the silicone causing an increase in hardness and brittleness. These compound can be used for molding, extrusion, calendering applications. Colors will match your requirement.

General purpose silicone compounds are suitable for customers that need the technical advantage and good performance of silicone without the need of special formulation. General purpose silicone compounds can be used for extrusion, compression molding, injection molding and calendered applications. Regularly a post cure is recommended to enhance physical properties. Colors will match your requirement.

Non-Post Cure Silicone Rubber is a silicone compounds which are normally post cured to improve the physical properties of the finished products and to avoid the blooming of the volitiles of the peroxide. Non-post cure silicone compounds give you the flexibility of eliminating one step in your process. Colors will match your requirement.

Fudow Company F5750F is a glass fiber.

Metox 50S is peroxide initiator for copolymerization of unsaturated resins polyester. They are mainly used with cobalt accelerators at temperature surroundings. They are suitable for manual and spray lamination. In relation to the hardener Metox-50 shows a shorter gelation time.

Xyfluor® 860, a highly fluorinated elastomer compound, offers excellent chemical compatibility over a wide range of temperatures from -76°F to 450°F (-60°C to 232°C). Recommended for applications requiring a combination of low temperature properties and chemical resistance, Xyfluor's capabilities surpass those of standard fluoroelastomers, PTFE and graphite. Addtionally, Xyfluor reduces overall cost by extending equipment service life.

Fudow Company F5800F is a Organic filler.

Ceramer 20 is a sinterable high performance polymers based on polyphenylene sulfone (PPSO2).

Silplus™ 30 AS, 30 duro hardness heat cured silicone rubber compound for compression molding processes, offers a good anti-static property to silicone rubber products.Key Features and Typical Benefits Good anti-static property Colorable translucent appearance Excellent mechanical properties and heat resistance Excellent processability Easy coloring Potential Applications Mobile jacket, keypad cover, keypad watch Consumer goods, novelty, accessory Industry roller, rubber sheet Automobile parts.

Fudow Company F5770F is glass fiber.

Pentox 40 is peroxide initiator for copolymerization of unsaturated resins polyester. They are mainly used with cobalt accelerators at temperature surroundings. These initiators are particularly suitable in those applications where it is required fast molding with transfer of the core, for example cold forming or in injection molding techniques. Compared to the Metox-50 hardener, they contain a lower amount of active oxygen. However, they show a similar one gel time and a greater exothermic effect, therefore, they are not recommended for use in production too thick layers in one operation, as well as for hardening gel coats.

Heroflon MG2 is a PTFE homopolymer which is non free-flowing powder grade.

Fudow Company F5626F is a glass fiber.

Metox VLHP90 is a liquid peroxide initiator based on peroxides methyl ethyl ketone in an Ōalan plasticizer. Compared with the standard MEKP, the initiator contains a reduced content of hydrogen peroxide, water and methyl ethyl ketone. May be used for curing unsaturated polyester resins (UPR), gelcoats, in the presence of cobalt accelerator. Especially recommended for curing gel coats due to very low content of hydrogen peroxide, water and methyl ethyl ketone. This high purity initiator can be used wherever the use of Permix-MC96 is demonstrated too fast gelling. Compared to Metox-BW85, it has a shorter gel and hardening time.

Fudow Company F5802F is organic filler.

Heroflon MG1 (BG) is a PTFE homopolymer which is non free-flowing powder grade.

Injection molding is a method of producing shapes for industrial products. Injection molding can also be divided into injection molding compression method and die casting method. Injection molding is a method of producing shapes for industrial products. Injection molding can also be divided into injection molding compression method and die casting method. Plastic injection molding is a method of plastic products. The molten plastic is injected into the plastic product mold by pressure, and then cooled and molded to obtain various plastic parts. The most commonly used plastic is polystyrene.

PBY Plastics PB23000D is a low crystallinity PolyCloroTriFluoroEthylene (PCTFE).

Grupa Azoty S.A Tarflen® SG1 is a Polytetrafluoroethylene (PTFE) material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for compression molding.Important attributes of Tarflen® SG1 are: Chemical Resistant Flame Retardant Wear Resistant Weather Resistant Typical applications include: Engineering/Industrial Parts Coating Applications Hose/Tubing Plumbing/Piping/Potable Water Sealing Applications

Heroflon MG1 is a PTFE homopolymer which is non free-flowing powder grade.

G-PAEK™ 1100PF is Ultra High performance thermoplastic polymer, unfilled Polyether Ketone, semi crystalline, fine powder for compression molding, standard flow, suitable for food contact application, color natural white.

Metox BW85 is a liquid peroxide initiator based on peroxides methyl ethyl ketone in an Ōalan plasticizer. Compared with the standard MEKP, it contains reduced content of hydrogen peroxide and water, and increased content of MEKP dimer.

INOFLON® M290 has good flow high bulk density with good mold filling behavior and it is used in automatic and isostatic molding of parts, ram extrusion of rods and tubes.

fluteck™ P1000 PTFE Standard Grade is Virgin PTFE for Ram Extrusion, Compression and Isostatic molding.

G-PAEK™ 1120FEP is Ultra High Performance Thermoplastic polymer, 20% PTFE blended in Polyether Ketone, semi-crystalline fine powder suitable for compression molding, milky white in color.

PBY Plastics PB10800T is a compression molded 40% bronze filled PolyTetraFluoroEthylene (PTFE).

Fudow Company F5650Fis a glass fiber.

Fudow Company F900 is an organic filler.

Stoner, Inc. E206 Silicone Mold Release is specially formulated as a release agent and anti-stick lubricant for molded materials such as plastics, rubber, waxes, and similar materials. It is our most popular mold release because of its versatility and high performance.

Arboform® ZE 50 Natur is made from 100% renewable raw materials and is biodegradable. This material contains lignin, which is second only to cellulose as the most abundant natural polymer. Lignin is a by-product of the pulp industry and the volume produced worldwide is about 50 million tons per year. Mixing lignin with natural fibers (flax, hemp or other fiber plants) and natural additives produces a fiber composite that can be processed at raised temperatures and pressure and made into moldings on plastic injection molding machines.

INOFLON® 220 has good flow with high bulk density and good mold filling behavior and it is used in automatic and isostatic molding of parts, molded sheets, small diameter and thin wall thickness tube.

Solver Polyimide Polyimide Resin Composite 40% Graphite can be used for aircraft, aviation, automobile, office equipment, electrical and electronic equipment, scientific instruments, industrial machinery, production equipment and so on. The polyimide is fit for the application surroundings which can be temperature resisting, sealed, dimensional stability, deformation without fracture, such as seeling ring, thrust washer, sliding bearing, vacuum pump vane, valve seat, gear and so on.

Durez™ 29502 by Sumitomo Bakelite Company is comprised of Phenolic Compound. It is commonly used It is available in Granules form.

Fudow Company F5772F is glass fiber.